ea3500 connect to a 4 case drive

Similar Questions

• EA4500 - unstable connection to my external hard drive from Seagate Freeagent

  Hello

  I would be very grateful if someone can help solve the problem captioned.

  I bought the EA4500 for a week and all is well, except that the connection to my external hard drive 1 TB via the USB port of the EA4500 is not stable.

  The router are visible at the level of the 'network' of Windows 7, as one of the "Computer".   I therefore use my memeo autobackup software to back up my data via a network connection on the external hard drive.

  It works very well, however, for a limited time.  The time is a few hours.

  After that happens, the device can no longer be seen at the level of the "network".  In addition, it cannot be mapped via the service 'road map' normal.  A "Not enough resources" error when I want to map the drive.

  The problem can be solved temporarily after a "roboot" of the router.  But it's frustrating.

  Can someone help me solve this problem?

  Thanks in advance.

  What is the ip address of your router buffalo? 192.168.11.1?

  Check and see if you are double natting.

  Try changing the scope and dhcp IP linksys range identical to the buffalo.

• Connection of an external SATA drive

  My desktop computer HP Pavilion HPE h8 - 1070t is not an output like my HP Pavilion Notebook 6v6t eSATA port.  Does anyone have ideas how to connect an external backup SATA drive to my office without this output port. ?

  Big_Dave.

  I changed the Vantec Sata enclosure with Azio box and it worked.  I used two boxes with my other system without difficulty.  The difference is apparently significant with the HP.  Thanks again for your support.  Jim

• How many workstations can connect and use a hard drive in windows 7 Professional?

  How many workstations can connect and use a hard drive in windows 7 Professional?

  Thank you

  Randy

  Original title: Windows 7 Professional Log In

  If my memory serves me, 10 is the professional for Windows Server limit.

• How to copy a catalog of external hard drive to the hard drive of the computer to use smart insights not connected to the external hard drive?

  I am very new to LR5. I put LR5 in place so that my catalog and photos are on an external hard drive. I discovered that when not connected to the hard drive, LR5 can't find my catalog, therefore, I can't do any editing in intelligent insights, unless it is connected to an external hard drive. How can I fix this so that I can edit photos without being connected to an external hard drive. Is it possible to copy the catalog out of the hard disk on the computer's hard drive or I have to re-establish a new catalog using LR5? Must the catalog always be loaded onto the hard drive? Thank you in advance.

  Yes that's correct. The LR catalog must be on the computer's internal drive. Then when you have smart previews activated you can change the image without going through the reader that they are connected. When you connect this drive images will be updated.

  Simply COPY these 4 folders on your internal drive in a folder called Lightroom catalog that you create. Then open LR and go on the file menu point and select open catalog. Navigate to the folder you created called catalog in Lightroom and select the Lightroom Catalog.lrcat 5 file and click Open. Once restart Lightroom open change preferences, > preferences, and under the general tab, in the catalog default section make sure that "when starting to use this catalogue:" listings in the area where you copied the files. Something like Macintosh HD/Wherever, have created it this folder/that folder name/Lightroom catalog.lrcat 5.

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• DV7-4280us - Bay of disk HARD 2nd vacuum has no visible connection to a 2nd HARD drive.

  My laptop Pavilion DV7 and previous DV8 had two bays for HARD drives, one of them wired to a hard drive, but not containing is not a hard disk at the time of purchase.  I expect the same thing when I ordered this Pavilion DV7-4280us, which is, I think, made in China, but I have not the same.  This one came without visible connectors for the hard drive, I had already bought to install into the empty Bay.  My Technical Support call made me advice to buy a disc kit hard (with caddy & connections) from HP, as if the receive connectors were available in the drive Bay HARD vacuum.  I didn't not agree because (and the next two paragraphs I added so that the well-intentioned forum members continue to give me the standard answer for laptops which actually have the usual connectors & waiting in the drive Bay HARD 2nd vacuum.  I appreciate the two forum members who have offered help so far, but there is no need to waste more based on my failure to clarify the problem):

  There is NO METAL NAKED INTO THE BAY VOID that COULD CONNECT a HARD disk.
        UNLESS A NEW CONNECTOR GOES TO THE MOTHERBOARD HARD DRIVE, IT IS USELESS FOR THIS COMPUTER.

  Each HARD drive connector I've seen only connects the HARD drive to a connector in the HARD drive Bay.
  

  The connector of the latter reaches the motherboard, and that the connector does not exist in this 2nd computer HARD disc Bay.
  

  Even if I could get a cable to connect a HARD drive to an unused connection & waiting on the M-Board, I can't M-Board.  M-Board is inside a barrier which could be called the bottom of the laptop - external surface of the portable computer.  (Battery and bays for HARD drives are outside the confines of the current computer, the value in their own hollow spaces in the bottom panel, with secondary coverage on the hollow spaces, i.e. the bays for HARD drives and storage media).  I looked for a way really open the casing and expose the M-Council connection for 2nd HARD drive (IF it exists); but I didn't know how to do it.  It is clear to me that this is not intended to be a facility run by the user. But I would if HP (or maybe even a 3rd party who made it) provided some good instructions.

  I'd like to think that HP did not make this change to the line DV7 laptops to double HARD drive, and that the Chinese manufacturer made the change without approval or even knowledge of the management of HP.  I want to believe that because he was, at best, a really stupid thing for HP to the customers who pay for the best HP can provide.

  So my questions are the following:

  1. The motherboard in this computer still has the ability to manage a 2nd hard drive?
  2. If 'NO', then HP would be willing to take over this very disappointing computer in Exchange to a DV7 which is equipped with HARD drive connectors available in the 2nd, empty, Bay?
  3. If 'YES', then
  4. HP or someone else would be willing to provide connectors, and instructions for me,
  5. OR install the missing connection to the drive for me, Bay
  6. While, in both cases 4 or 5, I can install a HARD drive in the Bay, empty 2nd drive reasonably, I expected when I ordered this computer?

  All my apologies and thanks to KaLin0908, who responded so quickly and helped me realize that my original description was not clear enough.  I hope that my changes to clarify the problem have not ruined the tone of my call.  I'm aiming for "clear and grateful."  If this revision reads as Loud or Yelling or abrasive or anything else bad, I'd appreciate any suggestions to improve it.

  I have the same computer.

  At first seems like you say but

  If you look carefully the second Bay of hd, you will see 4 small holes

  Those who are for the hard drive caddy, you can buy that and it's expensive

  You should also buy a hd cable, but be careful, there must be about 5 inches long

  The cable for 1 hard disk does not work

  One end goes on the hard drive and the other going to the MB. The connection is planned

  for the memory modules

  The kit costs about $ 45. If bought at hp and about 35 if purchased by another company

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  This will give you an idea of where/how the screws connect to the caddy

  4. connect the hd to the caddy /ssd

  4. connect the housing inside the laptop

  http://www.dectrader.com/605415-001-new-HP-HDD-hardware-kit.html#.ULTmVNcew1w "

  Almost the same video

  http://www.YouTube.com/watch?v=EZgiX-pzdL8

• XP Home - can not connect after a change of drive assignment

  I am running XP Home Edition on a system of several disc. For historical reasons I run XP on the D: drive and it normally works fine. I also have a C, E, F and G drive. I wanted to change my d drive to C drive according to standard systems. I changed the course of C to be I: but now I can't load Windows! Instead, once I entered my password it simply returns "logout". Naively, I assumed I would be able to return to disk management, if I had a problem... Obviously, the system must always and use the drive C. is there a way I can reverse the situation of the recovery console or another method?

  Hello
  OK, I solved the problem! :) That's what I did:

  I downloaded a copy of Ultimate Boot CD for Windows
  I used the built-in Registry Editor to modify System\MountedDevices
  Located at \DosDevices\I and it has changed (back) to \DosDevices\C
  Rebooted and everything is ok now!

  Microsoft 223188 article was helpful, but there are no articles that tell you how to fix the problem, if you can not connect on XP in the first place! I understand that Microsoft does not support the UBCD4Win startup but it has never offered tools equivalent system of his own other than the recovery console...

  In any case, thank you very much and a happy new year!

  Louise

• Unable to connect to the floppy USB drive

  I'm under VMWorkstation 8.0 in a Dell laptop and have an attached USB floppy drive, I have the floppy drive to automatically detect (the physical single available setting) but I can't connect to it.

  I also tried to connect to a *.img and *.flp file but I can't communicate with them either.  I can see where a file is created, but when I try to go on the A: drive all that I get is Abort Retry fail.  Demolition and try again only to return the same message, in case of failure gives me 'excitation current is no longer valid.  I did a file .img with WinImage version 8.5 and I tie and I get the same answer.

  they would work as well - it's just that vmware.exe and vmplayer.exe write often poor vmx files
  See http://sanbarrow.com/vmx/vmx-floppy.html

• How to connect external ssd as boot drive

  How do you connect an external ssd as the boot drive for an imac?

  It connect via USB, FireWire, or Thunderbolt, to restart with the key Option key and click it.

  (143523)

• Mac Mini loses the connection to the internal hard drive

  Hello

  I got in trouble once per day or almost one year that my Mini mac interrupts the communication with the hard drive. You can work away and all of a sudden all gel applications. Say, you happen to have a terminal open, if you try to execute commands in / sbin as stop or something like that, it is to say that you don't have access to the files with an error like this:

  bash: / sbin/shutdown: device not configured

  Finally the Terminal Server session freezes as well.

  I used the Apple Diagnostics for all the materials and it test verifies all very well. I bought and installed a copy of TechTools Pro (v8.0.3 build 1967) and he reported no problem whatsoever with everything. To be on the safe side, I replaced the memory, still no luck.

  I've lived a lot of system updates and none of them seem to have solved the problem. I am currently on OS X El Capitan v10.11.5 Beta (15F18c). Yes I know it's beta, but this problem before any release of El Capitan.

  The most reliable way to reduce the appearance of it during my work day is a reboot planned each night. For one reason or another, which reduces the frequency.

  I am at a loss on how to fix this and would appreciate any advice.

  Material is a Mac mini (end of 2012), the processor is an Intel Core i5 2.5 GHz, is now 16 GB 1600 MHz DDR3 memory, graphic is Intel HD Graphics 4000 1536 MB, storage is a 500.11 SATA GB Apple drive ST500LM012 HARD drive

  Thanks in advance.

  Maybe a bad connection tight to the HD. It could be the end of the water which connects to the system board. I had similar symptoms on my Mini 2012 and it is in this regard.  Like you if I stop and then after awhile restarted, it would be OK for a while.

  It could also be a problem with the HD

• Cannot connect and use 2 hard drives Canvio de Store.E at the same time

  Hello

  I have 2 devices Store.e Canvio: 2 TB and 3 TB respectively but it seems that I can't connect/use them at the same time, as if I do it, one of them (the last I connected), becomes inaccessible ("access denied").

  If I disconnect the first device I connected, the other starts to work,

  Is an odd question, and I can not find someone to live something similar...

  No idea how could it be the cause, or how can I solve it?

  Thank you

  I m wondering if the same problem is displayed using another computer or another USB hub with an additional power supply.

  From my point of view of the few this problem could be related to the low power provided by a single USB port.

  The two hard drives seem to support the USB 3.0 standard.
  The USB 2.0 port common provides 500mA and USB 3.0 requires 900mA
  This means that two USB devices connected simultaneously use 1800mA which could be too much for the USB ports for s laptop

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Mini 210-2130NR: impossible to connect to the wifi network driver missing

  I recently did a clean Windows 7 on my mini installation because the upgrade of Windows 10 left essentially unusable. I managed to install windows 7 Professional on this topic but I am not able to connect to my wifi to do updates. In Device Manager it says missing a network controller and video controller. I was able to find an adapter (Realtek PCI FE Family Controller) but I need help to find the others. I tried looking for drivers available under my product on the HP site, but she had something specific to Windows 10.

  Device Instance path:

  Network controller: PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01\4 & EDE306C & 0 & 00E0

  Video controller: PCI\VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_00\3 & 21436425 & 0 & 11

  Thanks for any help!

  Hello:

  You need these drivers...

  Network controller:

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  Video controller: you have posted you are running W7 64 bit, but your laptop came with W7 32 bit.

  You must use the driver directly from Intel 64-bit for the 64-bit version.  a 2nd on the list.

  Note: I think the Intel driver site is messed up because when I click on the link to get the driver, nothing happens, and this happened to me twice today.

  You may need to wait until after July 4 holiday to get the driver if you have the same problem.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/Intel-Graphics-Media-Accelerator-3150-Intel-GMA-3150.html

• Satellite Pro M70 - connection network wireless & query Update Driver problem

  I have a portable Satellite Pro M70 under Win XP SP3 and would be very happy of little help and answers to the following problems:

  1 Wireles Internet connection problem: my laptop Satellite Pro M70-220 (part number: PSM75E-00D008G3) is an adapter Intel(r) PRO/Wireless 2200BG Network Connection, with driver version 9.0.2.25, according to Device Manager

  I am staying with someone, and I'm trying to use his internet connection through its network (WPA2) secure wireless home.
  I could connect my laptop to the wireless network, but I can not get Internet Explorer and Outlook Express to work on it.
  I tried the Intel Wireless driver update to the latest version of the driver 9.0.4.39, but got the same result, and I'm back to Driver version 9.0.2.25.

  If you'd be grateful if someone could advise me on what could cause this problem and how to solve it.

  2. wireless driver update: site Web de Toshiba advised me for the two years that there is a driver update available (Atheros Wireless Driver v 7.7.0.406.2) for my laptop, but I have NOT installed, because the wireless network adapter Intel(r) PRO/Wireless 2200BG, NOT of Atheros.

  Ques:am I correct?

  Question: Why the Web from Toshiba site recommends the Atheros wireless driver update?

  Thank you

  AlanCB

  Hi Alan

  1.
  Can you use IE and other applications if the WIFI network is not secure with WPA2?
  You can test using WEP?
  Just to be safe because of securing WLAN.

  2.
  You are right. Your model has Intel WLAN card and if you need a new driver just visit Portal Toshiba WLAn under http://aps2.toshiba-tro.de/wlan/

  I really don't know what service or upgrade of system you are using, but if everything works well you don't need any update to date.