5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

Similar Questions

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the network "\\localmachine\sharedname" share

  I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.

  At the start of the converter, I have "connecting to a local server.

  Specification of the source system is OK, even if I don't know the certificate error.  The conversion wizard installs his agent and it connects OK.

  To the Destination System, I said:

  
  Type of destination: VMware Workstation or other virtual machines to VMware
  Product VMware: VMware Workstation 8.0.x
  Information on the virtual machine:
  Name: same as the source system, such as detected by the converter
  Location for the virtual machine: \\localmachine\sharedfoldername
  Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder.

  "When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share

  So far the measures of investigation:
  -Connection to the share through Windows Explorer works fine; It is possible to write to the share

  -J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist."  It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.

  -Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum

  The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'.  I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.»  "Please specify a UNC path such as: \\machine\sharename.

  Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running."  However, the next button is always disabled until credentials are provided.

  Can anyone help please?

  You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?

• Unable to connect to a network printer

  I am unable to connect to my network printer, even if when I run the command 'Connect to the printer' and select 'network', while the program is able to see my network printer, it crashes when I select the printer.

  I was able to connect to the printer in the past, but for some reason any printing interrupted.  I deleted and reinstalled the printer (HP OfficeJet Pro 8600) with the CD that came with the printer and once again, while trying to connect it froze.

  Any suggestions would be greatly appreciated.

  Hi André,.

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description provided, looks like you can not connect to the network printer.

  I have a couple of steps, which I think should help you with this problem.

  Method 1:

  Try the steps mentioned in this link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  Visit this link to learn more about "Troubleshoot network printer."

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  In addition, visit these links and check:

  What are printer permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-printer-permissions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Hope this information helps. In case you have issues with Windows, post here to Microsoft Community.

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• Unable to connect to the network because the parameters of the computer do not match the requirements of the network.

  The main computer in my house is connected to the web via a modem to our ISP (Cox).  We use a Cisco's Linksys wireless router.  We have configured a new laptop to connect through the router yesterday.  Now my laptop, which had been the connection very well, can't access the network.  When I go in the "network and sharing Center" and pull up nearby wireless networks, our network shows is even more bars, just a red X.  Reads the error message "unable to connect to this network because the settings of that computer to match the parameters required network.»

  I don't know what has changed on our network, but I was unable to understand what these "required parameters" are, so I was unable to change the settings of my laptop to match the requirements.  Pls help.

  Hi Sharpdale,

  Step 1

  I first suggest you to perform network troubleshooting in Windows 7 and check if it finds problems, and if he is able to fix it.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Use Windows to configure wireless settings and check if it helps to solve the problem.

  a. click on Start menu and select run

  b. type ncpa.cpl, and then click OK to open the menu of the network connections.

  c. Select your Wi - Fi connection service and choose the option change settings of this connection.

  d. go to the wireless tab and select (tick) labeled use Windows to configure my wireless network

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to a network error - change wifi profile native default

  Unable to connect to my network. When I try to see my network it says wifi native default profile

  
  Original title: change the profile default native wifi

  Hello

  Thanks for posting your question on the Microsoft Community Forums!

  From the problem description, I understand that you can not connect to the wireless network.

  For a complete list of the steps to try, see the tutorial wired and wireless on this page.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Unable to connect to this network

  I have a samsung series 7 chronos 2013 np780z5e the intel centrino n advanced wireless installed, running 64-bit windows 8 6235 card. I can connect to my home network with wpa2-personal encryption and the public WiFi at my University. However, I can not connect to wpa2-enterprise security connection. It finds the network credentials and then immediately provides the message 'Unable to connect to this network', without asking for credentials. This network works fine with other laptops, and I can even connect with my phone. I think it's a matter of windows 8.

  I tried the automatic network troubleshooting and updating to the latest drivers, but neither have worked.
  Update: after network oversight, update drivers and reboot, it works now. Either reboot or forget the add new network and fixed the problem

  Hello

  The majority of connection to Windows 8 breast problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer.

  Thanks for sharing the information. In case, if you need help, you can always after your questions related to Windows and your valuable suggestions in the Windows forum.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Help please. Unable to connect to the boot or system event Notifcation of error is displayed. Aero disabled - but the service is running.

  Hi all

  I have Windows 7 Professional 64-bit. Today, at the start, I had a very long message error stating "Unable to connect to the Notifcation event system" and advising me to check the logs.  Aero is also suspended - so I have a pc that looks like it's running XP. Hmmm.

  By checking the newspapers he no mention of system event Notifcation service fails, or indeed any of its services of dependant (System Comp + events, RPC, DCOM or RPC Endpointmapper server process launcher) and when I check the services I see that all these include the Notifcation Service to event system are running!

  The only error I have concerns the Management Service report as below.

  Log name: System
  Source: Service Control Manager
  Date: 29/06/2012 11:57:52
  Event ID: 7022
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: John-Ultra-PC
  Description:
  Service management report suspended starting Service.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7022
      0
      2
      0
      0
      0 x 8080000000000000
     
      219910
     
     
      System
      John-Ultra-PC
     
   
   
      Report management service
   
  

  On the papers of yesterday, I have a couple of what follows, no idea if they are relevant.

  Log name: System
  Source: Schannel
  Date: 28/06/2012-16:42:56
  Event ID: 36888
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: John-Ultra-PC
  Description:
  The next fatal alert: 40. The internal error state is 107.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      36888
      0
      2
      0
      0
      0 x 8000000000000000
     
      219782
     
     
      System
      John-Ultra-PC
     
   
   
      40
      107
   
  

  I don't have a slow connection, the desktop (even without aero) pretty quickly, even if windows is stolen hard drive. I checked for frgmintation and its less than 1%

  Ideas please.

  Try this:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/system-event-notification-cannot-be-connected/fdf654bd-C291-4c64-8629-d0a257fe7ae1

• can someone please help, unable to update or restore error-1

  can someone please help I'm unable to update or restore my iphone 5 c due to an error (- 1).

  It is usually a hardware error and you will need to get it repaired. You can also get the same message if the iPhone was jailbroken.

• * Please HELP - unable to complete installation of the new flash player...

  I've updated my operating system to Mac OS X Mavericks and went on youtube and he told me that my flash player is outdated (SAFARI).  I followed the link to download the new version of flash player, which seems to be 11.9 and the process works very well.  I reached this box...

  

  and I am completely unable to click on anything whatsoever.  When I drag my mouse on one of the three options, they highlight, as well as the button NEXT, but they won't let me click on.  The only way out of the window then is to press Alt + Cmd + Esc to force me to leave the Adobe Flash Player installed.  Please help me understand what is happening?

  In addition, some pages (seems like most) Adobe's Web site won't let me not click on anything either, I do a right click on the links, then open them in new tabs to navigate their Web site.

  Thank you in advance!

  Download Offline Installer: Flash Player (Mac OS X)

  Leave everything except the Finder.

  Double-click on the DMG and let it mount & open.

  Click with the right button on the installer and choose "view the contents of the package.

  In the folder happy / Resources , double-click the Adobe Flash Player.pkg file and let it run.

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.