Similar Questions

• EA4500 - Remote FTP does not work

  O read lots of itens of the same subject, but I have not found a solution. I bought an EA4500 wireless router. I plugged a 1Gig HD using the usb storage port and I activate the FTP service to access my files. Using the local network works fine, but now... I am outside my house and I need to get a file that is in my storage connected to my wireless router. I have unchecked the "anonymous internet request' box... version of the firmware: version 2.1.39.145204.

  How can I access my storage?

  Guys,

  I found the solution! The main problem is that my internet service provider does not allow port 21... and 8080... and 443. So first, I changed the FTP port 8085 in wireless router.

  The second thing is that I need to create a rule to share: click on "Access to records", after that, click the user that you want to use... click on share... and create a new rule, as "share all folders."  That click on apply.

• DMZ-Link bandwidth does not change the routing table countin traffic

  Hey guys

  I'm INE laboratories dong and shoved a weird one that delivers.

  I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

  Here is my configuration:

  Rack1R6 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 54.1.1.254 distance-54

  neighbor 54.1.1.254 dmzlink-bw

  neighbour 155.1.67.7 distance-300

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  No Auto-resume

  Rack1R6 (config) #.

  Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 54.1.1.254 0 54 I

  * > 28.119.17.0/24 54.1.1.254 0 54 I

  * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 114.0.0.0 54.1.1.254 0 0 54 I

  * > 115.0.0.0 54.1.1.254 0 0 54 I

  * > 116.0.0.0 54.1.1.254 0 0 54 I

  * > 117.0.0.0 54.1.1.254 0 0 54 I

  * > 118.0.0.0 54.1.1.254 0 0 54 I

  * > 119.0.0.0 54.1.1.254 0 0 54 I

  r > 155.1.0.0 0.0.0.0 32768 I

  Rack1R6 (config) #do sh ip bgp

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i114.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i115.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i116.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i117.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i118.0.0.0 204.12.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  *>                  54.1.1.254               0             0 54 i

  * i119.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  r i155.1.0.0 155.1.146.4 0 100 0 I

  r>                  0.0.0.0                            32768 i

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  Rack1R6 (config) #.

  # now R4 configuration

  Rack1R4 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 155.1.45.5 distance-200

  155.1.45.5 route-neighbour card GAME-54 on

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  neighbour 204.12.1.254 distance-54

  neighbor 204.12.1.254 dmzlink-bw

  No Auto-resume

  Rack1R4 (config) #.

  Rack1R4 (config) #do sh ip bgp Synt.

  Local router BGP 150.1.4.4 identifier UNDER number 100

  BGP table version is 18, table 18 main routing version

  15 entries for network using 1980 bytes of memory

  18 entries for path using 936 bytes of memory

  9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

  3 entries for BGP AS-path ACCESS using 72 bytes of memory

  1 entries PMO community, using 24 bytes of memory

  0 cache entries of BGP route-map with 0 bytes of memory

  0 cache entries of filter-list BGP using 0 bytes of memory

  Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

  BGP using 4620 total number of bytes of memory

  Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

  Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

  155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

  155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

  204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

  Rack1R4 (config) #do sh ip bgp

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * i205.90.31.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i220.20.3.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i222.22.2.0 155.1.13.3 0 100 0 200 254?

  Network Next Hop path metrics LocPrf weight

  *>                  155.1.45.5                             0 200 254 ?

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  * > 205.90.31.0 155.1.45.5 0 200 254?

  * > 220.20.3.0 155.1.45.5 0 200 254?

  * > 222.22.2.0 155.1.45.5 0 200 254?

  Total number of prefixes 14

  Rack1R4 (config) #.

  # and where is the real problem, R1

  Rack1R1(config-Router) #do sh ip bgp

  Version of BGP table is 15, local router ID is 150.1.1.1

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i114.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i115.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i116.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i117.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i118.0.0.0 54.1.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  * > I 204.12.1.254 0 100 0 54 I

  * i119.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i155.1.0.0 155.1.146.6 0 100 0 I

  * > I 155.1.146.4 0 100 0 I

  * > 205.90.31.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 220.20.3.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 222.22.2.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

  112.0.0.0/8, version 4 BGP routing table entry

  Paths: (2 available, best #2, table by default-IP-Routing-Table)

  MPIO: eBGP iBGP

  Announced for the update-groups:

  1          2

  54 50 60, (from a customer-RR)

  54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

  Origin, IGP, 0, 100, valid, internal multipath localpref metric.

  DMZ-Link Bw 250 KB

  54 50 60, (from a customer-RR)

  204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

  Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

  DMZ-Link Bw 12500 KB

  Rack1R1(config-Router) #do sh ip route 112.0.0.0

  Routing for 112.0.0.0/8 entry

  Known through 'bgp 100', 200, 0 distance metric

  54, internal type tag

  Last update of 204.12.1.254 ago 00:15:30

  Routing descriptor blocks:

  204.12.1.254, 155.1.146.4, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  * 54.1.1.254, 155.1.146.6, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  Rack1R1 (config - Router) #.

  as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

  can you please help me if I makeover anything in my setup?

  Hello

  Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

• Anchor WLC in DMZ, FW does not support mulit-static Rts.

  Hi gang,.

  Not looking for someone to hold me hand, but you can use some advice.

  We work through our deployment of a WLC guest. Our WLC anchor is in our DMZ.

  Management and the AP Manager are on the same subnet. The dynamic interface "VLAN" is on a different subnet from the other interfaces, and its Portal is the DMZ Firewall interface.

  Problem, the firewall does not support multiple static routes.

  Always do the management and dynamic interfaces must be on different subnets?

  Someone at - it experience with this type of configuration?

  I understand the value of the time, if I appreciate honestly all help I get.

  Best regards

  Larry feet

  Just to clarify, we're talking wireless access visitor right? Wired not invited?

  Wired allows you to create a custom in a vlan port specific necessary (but not when you configure this on the controller of anchorage)

  In any case... just make sure that the WLAN you want to dock is configured the same as on the controller of the DMZ. Make sure you anchor this controller to the DMZ and make sure you anchor the wlan dmz to himself.

• OSB does not work with the DMZ

  Hi all
  
  I have a DMZ set up our network infra. But after that our web service is not running.
  
  We address two ip, which are public (x.x.x.x) and of the OSB (y.y.y.y).
  
  This is my config to hosts:

  127.0.0.1 localhost.localdomain localhost
  y.y.y.y     osb-domain    osb-domain.mn

  Our web service endpoint url is:

  <WL5G3N0:service name="demoSOAPQSService">
  <WL5G3N0:port binding="WL5G3N1:demoSOAP" name="demoSOAPQSPort">
  <WL5G3N2:address location="http://osb-domain:7001/OSB_Project/demo/ProxyService/demo"/>
  </WL5G3N0:port>
  </WL5G3N0:service>

  I am getting following error:

  Exception in thread "main" com.sun.xml.ws.client.ClientTransportException: HTTP transport error: java.net.ConnectException: Connection refused: connect
       at com.sun.xml.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:138)
       at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:187)
       at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:124)
       at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
       at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
       at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
       at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
       at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
       at com.sun.xml.ws.client.Stub.process(Stub.java:272)
       at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
       at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
       at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
       at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
       at $Proxy29.hello(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
       at java.lang.reflect.Method.invoke(Method.java:597)
       at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
       at $Proxy30.hello(Unknown Source)
       at a.RegisterUsersWSPortClient.main(RegisterUsersWSPortClient.java:13)
  Caused by: java.net.ConnectException: Connection refused: connect
       at java.net.PlainSocketImpl.socketConnect(Native Method)
       at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
       at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
       at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
       at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
       at java.net.Socket.connect(Socket.java:529)
       at java.net.Socket.connect(Socket.java:478)
       at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
       at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
       at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
       at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
       at sun.net.www.http.HttpClient.New(HttpClient.java:306)
       at sun.net.www.http.HttpClient.New(HttpClient.java:323)
       at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:970)
       at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:911)
       at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:836)
       at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1014)
       at com.sun.xml.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:126)
       ... 20 more

  It works with the Console of the OSB web service test. But it does not the client application (ip x.x.x.x).
  
  He was working before the configuration of the DMZ.
  
  Are there any other requirements?
  
  ARO
  EBA

  Hi Abe,

  That's great. Because the problem is resolved, do you mind marking the question as answered? :)

  Kind regards
  Fabio.

• M176n: M176n of MFP LaserJet Pro ePrint does not work

  I have problem with my printer. I can't connect it to the ePrint service.

  EPrint functions is turning on and off without my knowlegde.

  After you have enabled ePrint in the web interface of the printer, printer does not print information sheet.

  When I enter the code for example my last code (from email [email protected]) edy638epu59 in HP connected it says either invalid code or something to the exception.

  I have updated the firmware of the printer.

  I added printer DMZ on my router.

  I changed the router to another.

  I unlocked the ports

  UDP: 5353, 547, 53, 67, 5355, 137, 138, 139 427, 161, 514, 3702, 5357, 445, 3910

  TCP: 445, 68, 80, 8080, 443, 137, 138, 139, 427, 9100, 445, 515, 161-9101, 9102, 9103, 9110, 9220, 9290, 9280, 9500

  UDP port range: 9999 to 65535

  I tried to disable IPv6 in the printer.

  I tried to print the fact sheet on the front panel.

  I tried all possible methods found on the web, and even got my replaced printer - same question...

  Hello @ Averus89,

  Welcome to the HP forum.

  I understand that you did a lot to solve your M176n and its connection to the ePrint service.

  I want to help you with this question.

  If the printer does not print the document to Web-based information services, or allowing you to add to HP connected, I have

  Set a manual DNS.

  I won't go into the details on setting this up. From your post, I think you know your way around the printer and your network. If I'm wrong, let me know. I'll go into the details.

  The DNS to try is:

  Primary: 209.244.0.3
  Secondary: 209.244.0.4

  Set the DNS, and then try again to print the web services information page.

  Let me know if it helps.

• Wireless camera does not work with the new router

  Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

  http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

  It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

  I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

  I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

  What was the authentication wireless on the old router and that you use the new 4200?

  Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

  Have you tried WEP to see if the unit works then?

• WRVS4400N does not connect to internet

  At home, we have a linksys WRVS4400N router. As of recently, it does not share the internet for the rest of the network... and I don't even know if it has internet. I tried to reset the router, the modem (7 years at Wired speed of bellsouth) reset and changed all cables. Here's what the router is currently pulling (after reset modem)

  LAN IP: 192.168.1.1
  WAN IP: 192.168.1.97
  Mode: bridge
  DNS1: 192.168.1.254
  DNS2: 192.168.1.254
  DDNS: Off
  DMZ: Off

  given that your modem is giving the same IP range as the (192.168.1.x) routers LAN IP address change address LAN IP of 192.168.1.1 to 192.168.2.1 (this will now be the address that you will use to access the web user interface routers)

  After you save the settings, release and renew the IP address of your computer... it must now make 192.168.2.x of the router then check internet

• File scan-to-PC/does not work, everything else done

  Windows 8.1 Pro x 64

  C310a all-in-one (fw TPI2CN1038BR (120910), (FW Patch 10))

  Linksys E2500 (fw 1.0.0.7)

  The PC is connected by wire, the printer is wireless.

  (Band 2.4, mixed patterns of connection and security)

  PC is 192.1.1.100 printer 192.1.1.103

  Security settings for the router:

  IPv4/6 SPI-Firewall-fire active

  Anonymous requests filtered

  Filtered multicast

  IDENT Port 113 filtered

  What does work is:

  Print, scan to PC

  What does work is:

  Scan from the printer to a file on the PC

  What I did:

  New installation of the operating system, does not

  DMZ was the PC, does not

  What Miss me?

  Make sure 'Discovery of the network' and 'Printer and file sharing' are turned on for your network on this computer.  You should be able to transform in the control panel.  Then, restart the computer and try again.

• ASA - DMZ - LOTUS NOTES ACCESS SEGMENT

  Hello

  I hosted lotus notes server and citrix servers in the DMZ segment of the asa. Access remote vpn has been configured. Users use vpn to access the servers. Users are not facing any problem when they try to access citrix and other servers after the connection to the vpn.

  But when they try to access the server lotus notes using lotus notes client after authentication are not able to view their mailbox. When they try to telnet to the port 1352 it is successful. When they ping to the server works very well. But not able to view emails. That is to say the server does not.

  I updated the entry of the host also in the files of the host of the client computer. But users of windows 98 operating system is able to display emails. But not in windows xp.

  Let me know what we can do in asa.

  When we replaced asa with pix, it works fine. But the servers are not hosted in in pix dmz segment.

  Concerning

  KRishna.

  Krishna,

  Please check the domain/DNS suffix. We had similar problems and it was resolved after you have added the DNS suffix on the General attributes for the VPN clients group.

  Concerning

  REDA

• Cisco forwarding port does not

  Dear experts, I got a production Firewall (Cisco Pix 515e 6.3 (1)) and I have set up to allow access to the outside on a server (SSH only).

  The server is 10.0.5.200.

  External IP is a.b.c.d. (should I use the FW outside the IP address of the interface?)

  Here's the sanitized output:

  6.3 (1) version PIX

  interface ethernet0 100full

  interface ethernet1 100full

  Auto interface ethernet2

  interface ethernet3 100full

  Automatic stop of interface ethernet4

  Automatic stop of interface ethernet5

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 provider interieure4

  nameif dmz security99 ethernet3

  nameif ethernet4 intf4 security8

  ethernet5 intf5 security10 nameif

  activate the encrypted password of XXXXXXXXXXXXXXXX

  passwd encrypted XXXXXXXXXXXXXXXXXX

  IP address outside a.b.c.d 255.255.255.240

  IP address inside 10.0.1.254 255.255.255.0

  provider address IP X.X.X.X 255.255.255.0

  dmz X.X.X.X 255.255.255.0 IP address

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.0.1.0 255.255.255.0 0 0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  NTP server 192.43.244.18 prefer external source

  NTP server 128.102.16.2 source outdoors

  Enable http server

  6.3 (1) version PIX

  interface ethernet0 100full

  interface ethernet1 100full

  Auto interface ethernet2

  interface ethernet3 100full

  Automatic stop of interface ethernet4

  Automatic stop of interface ethernet5

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 provider interieure4

  nameif dmz security99 ethernet3

  nameif ethernet4 intf4 security8

  ethernet5 intf5 security10 nameif

  activate pnxJXWf9kU.x7YfY encrypted password

  WL6KtWnsAjAQS2yI encrypted passwd

  outside_access_in ip access list allow a whole

  access list outside-access enable icmp a whole

  access-list DMZ_access_in allow icmp a whole

  IP address outside a.b.c.d 255.255.255.240
  IP address inside 10.0.1.254 255.255.255.0
  provider address IP X.X.X.X 255.255.255.0
  dmz X.X.X.X 255.255.255.0 IP address

  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 10.0.1.0 255.255.255.0 0 0

  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  RADIUS Protocol RADIUS AAA server
  AAA-server local LOCAL Protocol
  the ssh LOCAL console AAA authentication
  NTP server 192.43.244.18 prefer external source
  NTP server 128.102.16.2 source outdoors
  Enable http server

  Those in bold are the commands that I added:

  static (inside, outside) tcp a.b.c.d 2022 10.0.5.200 ssh netmask 255.255.255.255 0.0

  access-list 100 permit tcp any host a.b.c.d eq 2022

  Allow Access - list 101 tcp 10.0.5.200 eq 22 a

  Access-group 100 in external interface

  Access-group 101 in the interface inside

  When you access from the Wan, I used putty SSH port 2022 a.b.c.d IP in and he gave me of waiting times. I used the:

  Capture interface capo outside access-group 100

  The results were (that I can remember that I am not on site):

  My WAN IP-> a.b.c.d (R)

  My WAN IP-> a.b.c.d (S)

  My WAN IP-> a.b.c.d (S)

  My WAN IP-> a.b.c.d (S)

  The server on the internal LAN access is great and I can access port 22 on the server on the local network (Note: there is a L3 switch in the environment and inside the IP segments are 10.0.1.0/24 and 10.0.5.0/24 routable both.)

  This is what I did so far and would like more ideas on this subject that I am currently facing to. thanks!

  Hello

  Configuring static PAT (Port Forward) seemed correct to me.

  If you use the IP address of ' outside ' interface you would generally configure the parameter "interface" , and not the IP address.

  public static interface 2022 22 netmask 255.255.255.255 tcp (indoor, outdoor) 10.0.5.200

  Of course if you can/want to save a public IP address for this server only you could configure static NAT

  public static 10.0.5.200 (inside, outside) subnet mask 255.255.255.255

  That would bind essentially those 2 IP addresses, and you can allow services that are needed for the current server. Naturally, you will also need to allow traffic in the external ACL to the new public IP address.

  But it should also work with your configurations. If you want to use the IP address or a separate public IP's to you.

  If you are missing the 'road' to the 10.0.5.0/24 subnet in your PIX configuration so it is an obvious problem in why the server is inaccessible from the Internet. So, I would start by adding the "itinerary" necessary and retest. If it does not then would be good to verify that the routing between the server and the PIX is fine. For example, there is a route to the PIX server, and the server has a default route takes traffic to the PIX.

  Hope this helps

  -Jouni

• iPhone 7 more buttons outside does not

  I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.

  The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.

  Has anyone seen this issue or know how to fix?

  Thanks in advance.

  I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?