EA6500 dead

Hello

I just got a new EA6500 on Felix and try as I might I cannot find a wireless signal. The Setup program on the CD fails with the message of failure to find a signal.  Various devices can not see a signal either.  The logo of Cisco fast flashes and if I can ping 192.168.1.1 successfully for the LAN connection on port 80 is refused.

I tried to reset the router, but nothing seems to happen. Is it maybe another tip to reset the router or to force an update of the firmware from USB?

See you soon,.

Al

In the end, I got a replacement.  It works very well - I have a question that I can't get write access to USB devices but I am now looking at this.

See you soon,.

Al

Tags: Linksys Routers

Similar Questions

  • Removal of a dead Smart Wi - Fi router

    Hello!

    I need help...

    I just replaced my Cisco EA6500 router, because he finally died, I replaced it with an EA8500, I kept the same name of the previous router wireless network, but today, WiFi Smart shows two networks with the same name - a online and offline...

    How can I remove a router 'offline' and dead Smart WiFi?

    Thank you!

    Hi keirebuniiru. I understand that you have associated the two routers on the same Linksys WiFi Smart account, and since the EA6500 is no longer active, it shows offline. Well, let me help you with this. Please send your full contact details (name, first name, telephone number and e-mail address) to [email protected] and please include the link to this post.

  • EA6500-double WUMC710-WRT310N as Access Point

    After getting a Smart TV for my basement last year, I was unable to get a proper my WRT310N wireless signal.  I had the WRT310N on the second floor with my desktop PC.  Wifi should reach the basement, but not good enough to stream hi-def movies.  To remedy this, I bought a router of EA6500 and the WUMC710 bridge to replace the WRT310N.  I put the EA6500 on the ground floor, the bridge in the basement and I was using Powerline to access my PC upstairs.  I become disillusioned by the stability of the signal by current bearer of the PC upstairs, so I bought another WUMC710 to my floor.  This configuration is therefore works very well, EA6500 ground floor with of two WUMC710, one upstairs and one in the basement.  The only problem I have left is a wifi dead spot in the master bedroom.  I not was too concerned about the place of the dead since we do not use wifi in the bedroom very often, but I recently heard that it is possible to use my old router, the WRT10N, as an access point to extend my range of wifi.  I followed some instructions of the internet to get the WRT310N set up as access point (disable DHCP, configure phrase password and security, the same as on the EA6500 router).  I then used the power lines through a signal ethernet of the EA6500, the son of AC, in the House of the masters of whetre the other carrier current module online is now connected.  I then connected the WRT310N to this Powerline online and the WiFi in the room was now nice and sharp.  Note that this WRT310N is out now wifi in the main room, while in the corridor on the other side of the second story sits the WUMC710 bridge, which is connected to the EA6500 via wifi. At some point during the day wifi stop working throughout the House.  My suspicion is that the WUMC710 passed the EA6500 wifi signal and picked up the WRT310N wifi.  The only way I could get wifi back working again was to unplug the WRT310N access point.  Is there a way to put bridges (WUMC710) so that they will only connect to the EA6500 and NOT the WRT310N?

    Hello. Given that both routers are set up with the same wireless name and password, your WUMC710 will connect to one of them. If you wish, you can configure - your WRT310N with other wireless name and password so that your bridge will connect with EA6500. This should help.

  • My iPhone is dead

    My iPhone is dead. Without doing anything from one moment to another, I was not able to put it on more. Any ideas what I can do about it?

    Try the procedure described here: If your iPhone, iPad or iPod touch won't turn on - Apple Support

  • I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

    I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

    horse8905

    Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

    Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

  • Dead watch - repair service apple request for transmission in French - no address?

    Is weird - we have a watch dead and filled out the forms online to send it in - service demand went- but no email was sent and no form, no label shipping, no instruction or web page indicate us where to send to!?

    Our "repair" status is blocked in-step 1: application

    What is going on?  The user interface for the service is horrible.  No idea what's going on.  No idea where to send them.  A 1 week wait 'permission' just to take it into a store local and even take it for repair.  The bloat and bureaucracy is palpable - I've used Apple products for 32 years, but if I was a user of 1st period (like my husband), this experience would lead me away!

    Hello...

    Sorry you're going through this hassle.

    At this point, it would be preferable to communicate directly with Apple > Contact - official Apple Support

    Or on Twitter: @AppleSupport

    Remember to follow the instructions to retrieve your ready watch for the service here > Apple Watch response Service - Apple Support

  • How do I know if a dead iPhone recharges?

    My iPhone 5s has temperament type, and I have to shake the cable around a bit before it will load sometimes. Normally, it's all right, because you are simply looking for the icon of the lightning next to the load indicator.

    On this occasion, the phone is completely dead, and now I can not tell of the enigmatic symbols on the screen tells me that he is in charge, and tells me that it needs to be plugged.

    Sometimes I have an empty battery with low power red icon, and sometimes I have the same thing, only with an icon of a connector of lightning at the bottom of the screen.

    Who's who?

    Left: needs to load, charger not connected.

    Right: must be loaded, load current.

  • Hi, I am looking to replace my battery. I have a MacBook Pro (13-inch mid 2009) and the battery is dead. How can I get a new one? Thank you.

    Hello

    I'm looking to replace my battery.

    I have a MacBook Pro

    Specs below:

    (13-inch mid 2009)

    Processor 2.53 GHz Intel Core 2 Duo

    Memory 8 GB 1333 MHz DDR3

    Graphics  NVIDIA GeForce 9400 M 256 MB

    Software  OS X 10.9.5 (13F1911)

    Built-in display: 13 inch (1280 x 800), NVIDIA GeForce 9400 M 256 MB graphics card

    Big problem is that my battery is dead.

    (1) what is the best battery you could recommend.

    (2) where I can source for this battery.

    Thanks - Nairobi - Kenya - currently in Zambia

    Your best option take it into an Apple store. And get it replaced.

    Alternatively, you can buy one here https://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Uni

  • How to unlock my dead uncles iCloud account?

    having a problem with my dead uncle's iPhone 6 on how unlock his account iCloud

    The only way that you can be able to get the Activation lock removed is if you provide a death certificate and the original proof of purchase for the device. Take it into an Apple Store. They will have to determine if they have enough information to disable locking.

    Good luck

    GB

  • The version of ESR on the ftp site is exceeded - the ftp site is dead?

    Munki allows us to deploy the version of ESR of Firefox. Normally, we check the updates here:

    http://FTP.Mozilla.org/pub/mozilla.org/Mozilla.org/Firefox/releases/latest-ESR/Mac/en-us/

    However, the version here (from today ' hui - 10 Nov) is always 38.3.0 - and not the current 38.4.0

    This FTP site is dead? Or someone not the update? (One wonders if he is dead because the no - ESR 'releases' subdirectory has no consumer 42.0 version either...)

    Thank you!

    -Steve

    Hi steve, https://archive.mozilla.org/pub/firefox is maintained for mozilla software download directory.

  • I have an iphone that I inherited my dead aunt.  How to re-enable it for my company?

    I have an iphone that I inherited my dead aunt.  I would be able to reactivate it to my own cell phone carrier?

    You will need a notarized copy of his death certificate, evidence that you were indeed the legal device heir and the evidence that she was the original owner before his death. Take these as well as the phone to your local Apple store where they can help you.

  • When a Apple Watch looks dead

    They gave me a Apple Watch for my birthday in may 2016. It has worked perfectly since then - until tonight.

    I went to check the time a few minutes ago, but the watch appears to be quite dead.

    I was it load every day night - it's usually about 65%, when I go to bed. There has been no sign of battery problems.

    None of the controls on the watch, or the display has no effect. I put the watch on the charger but nothing happens, except the charger get very hot.

    Before returning the watch, is there something that I do not I can try?

    Hello

    Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

    If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

    After this period, if it has not already restarted automatically, remove it from the charger and:

    -Try to restart it (by pressing the side button until you see the Apple logo).

    -If necessary, then try force it restarts again.

    More information:

    If your Apple Watch does not respond or won't turn on - Apple Support

  • Dead Pixel 6s iPhone 16GB

    I got my iPhone at the end of May.

    I had to restore my iPhone and connect it to another computer, because when I tried to transfer my music to a new laptop, he stated that it could not be established with two different iTunes.

    After putting my iPhone in about a week, he now has a pixel on the screen it is on the upper left side, but kind of more in the Middle, not under the name of carrier. There is also a blackish research brand. I don't know if it is also a pixel or something else.

    It is not on a screen protector I've ever had a still.

    On any page of safari or white page on the iPhone, it is clear and hard to miss the black mark and if you look carefully at the tiny pixel.

    I have never dropped my phone and kept in excellent condition.

    Apple will replace my iPhone? I have the Apple Care 1 year warranty.

    The iPhone was bought directly from online from Apple for $1006 site, I didn't buy Apple Care +.

    Will Apple Replace this screen for a price of replacing it for free?

    Thank you

    Dead pixels are covered by the warranty. Take your phone to an Apple Store and they will test it. I had an iPad replaced for free as collateral because of dead pixels.

  • How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

  • Cannot use the option button to access the folder of bookmarks hidden on a dead drive

    I'm on Mac OSX 10.7.5, and I can easily access the folder on my current drive by pressing the option key (so that the hidden library appears) then get bookmarks of otherwise hidden files (since it's my new boot drive)

    BUT

    I need to copy / move my LAST favorites since ten days previously, a dead hard drive. The drive is usable, just not able to start.

    BUT

    Since this amazing new 'hold option on GO in the Finder menu to see the invisible library feature' (sarcasm) requires your operating system to be started, I can't access the bookmarks folder in the library. How can I do this if the Finder is not started on the dying drive? Is - this make any sense?

    Check this?

    COR - el said

    Try:

Maybe you are looking for

  • HP Officejet 6700 does not print

    I have a HP Officejet 6700 connected to my desktop HP w1858.  I can't the computer to send documents to print.  The printer icon has a yellow triangle with a! Select this option.  I tried to download a driver for HP printer, but it still does not pri

  • HP laptop - 15-r249tu: 15 HP r249tu Notebook wireless driver for 32-bit windows 8 x 64

    Please help me to get the drivers for my HP laptop laptop-15-r249tu (Free DOS)...I installed windows8 32 bit, x 64 based processor...Also please help me to get all the other drivers as well

  • Problem with function "BD" in TestStand/LabWindows

    Hello, good day. I am having some problems with connection BD function I use in a personal function inside a DLL. I had a function called GetSensor , which I know it works because I have used and tested in the LabWindows environment. Its function is

  • HP Pavilion g6 1216er: Internal Server Error

    I want to download drivers for my laptop HP Pavilion G6 1216er, but your site does not work properly. This Web page does not open http://support.HP.com/ru-ru/product/HP-Pavilion-G6-1200-notebook-PC-series/5145704/model/5200133/DRI... Error message: I

  • Time-loop at 1 MHz

    Hello everyone, After if you are looking for something already post on the subject, I found a lot of interesting information but no directly who can answer my question. I have LabView with time real extension. So far, I managed to do a time loop at 1