EA6500 - different strengths of wireless signal

Similar Questions

• Satellite L750 - low wireless signal

  I have a 5 day old L750 Satellite which can collect only 40% wireless signal less than 20cm from the router and loses signal total of about 2 m of him, turned to Toshiba support who suggested to the restoration of the system, did this and no improvement. Have you checked the Atheros driver and he said to his place to date, also checked the option to which has been suggested in other threads.

  The router is good because my vintage Compaq and ipad2 have full strength signal of several rooms by far.

  Please help as I'm pretty impressed with my first purchase of Toshiba and will return it if I can't solve this problem.

  Hello

  Have you noticed this problem only with the Eco Mode setting or also with power plan to high performance? This means that you must define * Maximum Performance * power option for the WLAN card in terms of power.

  Next to the update of the WLAN driver, you should also check the BIOS version. Take a look at the page if there is a newer version and if so try to update from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• wireless signal is low by next computer laptop

  wireless signal is low compared to adjacent laptop.  Can what adjustments or changes I make to wireless setup to eventually receive a signal stronger?

  Hi Steve,.

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, I see that you have found the laptop low wireless signal.

  For you help you please answer these questions:

  1. what operating system do you use?

  2. What is the brand and model of the laptop that has the problem?

  3. you Ant changes made to the computer before the show?

  I suggest you refer to the article provided:

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-wireless-signal-strength-so-low

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• EA 6200 wireless signal disappears momentarily and returns

  I have a 6200 EA (EA6200), new with a computer, an apple TV and 4 Iphones/Ipads, all within walking distance.

  My problem: every once in a while, the wireless signal disappears for a minute or two and then returns to normal.

  During the navigation of the user interface, I was unable to find out if there is an event log to show what is happening, so that I'm flying blind.

  Which never happened with my much more old linksys wireless adapter.

  Thank you!

  Hi elnuevohomero,

  This may be caused by interference. Ensure that the 2.4 GHz and 5 GHz networks have different SSID. Try changing channels as well.
  You can try using 6,3,9 or 1. It is also recommended to place the router on a higher location, where it can broadcast wireless signal properly.

• E4200 v2 wireless signal power is intermittent

  Just updated firmware for 2.1.39.144146

  have 5 GHz mode - mixed, WPA2, 40 mhz, channel 161 channel width

  the rule 2.4 GHz mode - mixed, WPA2, 20 mhz, Channel 6 channel width

  Online technical support said it could solve my problem, but my old e1000 had a stronger and more coherent (fluctuating) broadcast signal.

  My PC and the router are in the family room at the back of the House. The signal strength is Ok in the first room, but 2nd room in front of the House (30 feet and two walls away) it is 3 bars to nothing all the time. We have a guest who stay with us two days a week. There has never been a problem with the signal strength of the e1000 for recent years, but the v2 e4200 behaves like a piece of * beep *. I spent over 60 minutes with an online support person whose answer was to upgrade the firmware (which of course now removes a direct access to the router via the browser.)

  I hope that someone knows what I need to do to make this work, or it goes back to Amazon and I'll buy another brand of dual band N router.

  Change the channel of your router to 1, 9 or 11 to optimize your wireless signal. Maybe this link can help http://www.howtogeek.com/howto/21132/change-your-wi-fi-router-channel-to-optimize-your-wireless-sign....  If still the same, I think this device needs to be replace.

• Weather a barrier on the power of the wireless signal?

  FREE WI - FI, RAIN & SNOW

  If a Protocol "N" dual-band WI - FI adapter which is connected directly to the USB port of a laptop computer inside the House and the router is in the garage about ten feet, should there be a weakening of the reception quality in the good House when it happens to be raining or snowing in the area of 10 feet between the garage and the House?  In other words, in addition to METAL interference or microwave OVENS or WIRELESS PHONES... not the weather elements possibly hinder these network connections?

  I thank very you much for any information.

  Joe

   

  Hello

  The weather could affect the signal strength. Radio transmission uses digital spread spectrum. Even if a small problem can spend because of lightning nearby, the packet will be retransmitted, you won't notice a difference. (Unless the lightning blew your 2.4 GHz wireless system telephone and microwave ovens are generating more effective disruption.

  In addition, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  It will be useful.

• Cascade 2 WRT300N and have both sends a wireless signal

  I searched the forums, discover different cascading routers and posed this question in a different way, but I don't know if I'll be able to use a 2nd WRT300N in order to broadcast a wireless signal if I connect it to my 1st WRT300N. Routers will be connected with about 50 ft 5 cat. Is this possible? I connect the ethernet port to the port ethernet or go eithernet port 1 to the WLAN port on 2? Any help would be appreciated.

  1. you're not technically a wireless router but only one wireless access point. A WAP610N or similar would be the better choice in this case.

  2. you can use a router as a simple access point and ethernet switch. Change the address LAN IP of the second WRT to 192.168.1.2 192.168.1.1. Disable the DHCP server on the second WRT. Then, connect the two LAN - LAN. Do not use the internet port of the second WRT!

• can wireless signal is strong, but I can't connect to internet

  Wireless has been lost, what it means, no legacy wireless is not available

  Hi Jose,

  Thanks for posting your query on the Microsoft Community.

  Wireless signal can show low if your PC is too far from the access point or router wireless or other device that is connected to the wireless router uses the strength of the network. If some devices such as these are near your computer, turn them off temporarily or move them further. You can move your computer as close as possible to the router and check.

  Limited connection means that the PC is connected to the router, but the PC has not been assigned a valid IP address, so you can not actually in the Internet. It can also indicate that a valid IP address has been assigned, but the PC isn't an Internet connection. If you are connected to a home network, try restarting the router.

  1. What is the brand and model of your computer?
  2. Have you installed a third-party security software on your computer?

  Please follow the steps mentioned below.

  Method 1: Please follow the steps mentioned in the link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  See also: Why I can't connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  Method 2:

  Step 1:

  You can try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  Step 2:

  We can also refer to article and check if the settings are set correctly.

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-8

  Note: this article also applies to Windows 8. 1.

  Method 3:

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered.

  I suggest you try to reset the TCP/IP stack and check.

  (a) of the splash screen, type command prompt.

  (b) right-click on command prompt and choose run as administrator.

  (c) at the command prompt, copy and paste (or type) the following command, and press ENTER:
  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  (d) restart the computer and check the issue.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Cisco Aironet 1131AG and measure access points to the power of the wireless signal?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  We have about forty points of access Cisco Aironet 1131AG spread over four floors and they all have a static IP (BVI1) on the same SSID, customers will be on its own virtual local area network (dhcp on 3750 switch) and they use several channels (1,6,11).  Cisco Wireless Control System is pending. This wireless network should support roaming for customers (there will be Wi - Fi tags of multiple AeroScout and wireless laptops). To measure the strength of the wireless signal and wireless coverage on each floor. My questions are:

  1. How to measure the strength of the wireless signal: we must meet at least three APs available with signal excellent (I guess for the WCS needs that will determine the position of the client in the building)? We thought to use NetStumbler and a few laptops with wifi and measure as many points as we can as simpler thing. Or should we use something like Cisco Aironet Client adapters for our mobile phone and then use Cisco Aironet Client Utility (is it worth buying for our analysis and measurement)? Any other idea?
  2. What signal level should we consider for a good wireless (dBm)?
  3. That we should propose for authentication, authorization and management accounting? What happens to the roaming wireless? I did not quiteunderstand WCS, WDS and WLC-that should be used for above tasks?

  Thanks in advance.

  "Use the command on the AP" sh dot11 associations "will give you the clients associated with success.  If you add the MAC address of the client at the end of the command, you will get detailed information.  Look under "Signal Strength" and "Signal to noise".  Under the strength of the Signal, you want a value of-75 dBm or lower (lower values the better).  -76 dBm and is bad.  Under Signal-noise, you want a value of 25 dBm or more (values higher the better).

  To measure the strength of the signal, I use Airmagnet, but you can use Netstumbler or Cisco Wireless Site Survey.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• my printer will not get the wireless signal and so my laptop can not find print, what should I do?

  How can I make the printer get the wireless signal?

  1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.

  2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!

  I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out.  You should connect the printer via a cable to the wireless installation.

  If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.

• In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.

  WIFI & PHONES WIRELESS, ETC.

  In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.  I had to buy a cordless phone and it was always in the sealed box.  I was then with a laptop to the library branch when the librarian approached me and said that "even if unconnected cordless phones and microwave ovens, as well as TVS, VCRs and vacuums... can cause interference with the optimal speed of WIFI and efficiency... »

  Can someone explain if it is absolutely correct.  Of course, I politely responded that given that the laptop was still in its original packaging and seal (I had just bought and not even opened) and unplugged, it could not interfere with anything.

  Please specify.

  Thank you.

  Joe

  A non powered device (not plugged in, no batteries, etc.) cannot intervene in anything at all.  No power, no transmission, no interference. However, any electronic device can interfere to some extent with any other wireless signal, if it is running.

• With the help of desktop computer as a wireless signal Repeater.

  I recently moved and my for my PS3 wireless reception is terrible, so I was told I could use this other desktop computer, which receives the signal much better, as a relay instead of buy a wireless signal Repeater. How can I get this computer also spread the signal from the original router downstairs?

  I'm sorry, but there is nothing built into Windows XP that can do what you want.

  You might be able to do a search on the web and find a third party program to do this.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• What's Dell Dimension 2400 desktop computer capable of capturing a wireless signal? Should this function be switched?

  Dell dimension 2400 desktop computer was plugged into the wireless router we have. We got a new computer and moved the old desktop (Dell 2400) in another room. It is not picking up, or even searching for a wireless signal. She still has this ability? How can we it give this ability?

  The Dimension 2400 is not normally a built-in wireless networking capability.  To view, go to the Control Panel > Classic view > System > hardware > Device Manager and double-click network adapters .

  If that doesn't show wireless network card, you can add it by buying a USB wireless network adapter or a Wireless PCI adapter card .