each time is looking for something that I'm redirected. should I remove firefox

Similar Questions

• I have an am a-65. I'm looking for something that could have a quiet AF. What lens?

  I have an am a-65. Because I use it for shooting video, I'm looking an a mount, which could have a very quiet AF; This kind of option AF slient we could find with the NEX line. What purpose then? Any idea? Thank you

  If you are looking for quiet AF, your choice is the SMW 'Super Sonic Wave Motor"of Sony, $" ultrasonic silent car ' of Tamron and HSM "Hyper Sonic Motor" all are quieter and provide the fastest development, but they are not cheap do not know if the PZD 'Ultrasonic Piezo Drive' is as quiet as the others but its offered in an all in a zoom which is nice.

• Windows Media Center opens every time that I'm looking for something!

  Hello, I have a problem. Whenever I get something, for example in google chrome, IE8, or even in Help and Support, once you press on enter it opens Windows Media Center! Like as if its been programmed to open each time! So when I was typing this, I found a similar question. The "I want to stop the windows media center to automatically...". "so I followed the instructions to go in" start > default programs > Set Program Access' and then choosing Windows Media Center to be disabled. " Now whenever I'm looking for something an error message! Something like the software has been restricted, or something. Can anyone help?

  Hi getslinky2,

  I hope you do well. It would be good if you could provide us with the exact error message. However, you can try the following steps.

  1. Click Start, then Control Panel.

  2. click on default programs.

  3. click on program access and computer by default.

  4. click on custom.

  5. allow access to this program.

  Please let us know regarding when exactly this issue started while we offer a system restore when the computer was working fine, if this is really necessary. We also know if you have made changes to the computer or programs before this problem started. Please try these steps and let us know so that we can continue troubleshooting to diagnose the problem.

  Concerning
  Support Microsoft Rehman

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• Just bought a Nikon D7200 camera.  Had a D7100.  With the help of ElemenD7200.  I can't go to 14 items because I have Windows Vista... platform not supported by Vista.  Looking for something to 'trigger' me with a new computer due to the fact that Vist

  Just bought a Nikon D7200 camera.  Had a D7100.  11 of the components support the camera.  Using of 11 items, the D7200 will not import the RAW files.  I can't go to 14 items because I have Windows Vista... 14 platform not supported by Vista.  Looking for something for me to 'trigger' with a new computer due to the fact that Vista can not do a bunch of stuff, so I ordered one with 14 elements.  @ I understand that 14 elements does support the Nikon D7200 because it comes with Camera Raw 9.1.   Is this correct?

  Yes PSE13 or PSE14 will support the D7200

• You are looking for something FedEx

  Separated from this thread.

  you are looking for something fedex November 13

  You'll want to see http://www.fedex.com/us/ to help with that.

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• You are looking for something similar to WP-Invoice in Business Catalyst

  Hi all

  Looking for something to do custom invoices on British Colombia-similar to WP-Invoice - https://www.usabilitydynamics.com/products/wp-invoice/

  The workflow I want is:

  • receive a form with information of a customer
  • having this information partially fill a quote/invoice
  • Complete the rest of the quote/invoice myself (indicate the cost etc.)
  • Send the quote/invoice to my client with a unique link
  • the unique link will direct the customer to a page that they can pay the Bill

  WP-Invoice is very similar, but I did find something equivalent to the catalyst for the company. I'd love to hear your reactions and thoughts!

  See you soon

  Chris

  Hi Chris, with the e-commerce package, you get quotes and orders.

  You can have a shape that forms a quote or a shopping cart experience to create a quote which generates an order.

  You can change this and generate an invoice from that or direct a person to a form with orderid to pay this command etc.

• All I wanted to do was save my trial version of Photoshop, and I think that I just paid $9.99 for some BS Clould creative. How to do what I wanted vs pay for something that I didn't? It is impossible to talk to or e-mail to a human being. I just want to h

  All I wanted to do was save my trial version of Photoshop, and I think that I just paid $9.99 for some BS Clould creative. How to do what I wanted vs pay for something that I didn't? It is impossible to talk to or e-mail to a human being. I just want to have my work in photoshop again like in the demo. Thank you

  Photoshop is part of the collection of product called creative cloud. If you pay $9.99 a month, you have the Creative cloud photography Plan, which lets you run Photoshop and Lightroom until you stop paying. So, you could have what you need - check your receipt.

  Despite the 'cloud' in the name, the apps run locally.

• I'm looking for Javascript that can be part of a checkbox or a text box, or probably both who will open a document secured by a password?

  I'm looking for JavaScript that can be part of a checkbox or a text box, or probably both who will open a document secured (using a password entered correctly)?

  Is this possible?

  I think it would be easier to access as needed without having to directly access the Edit menu items.

  Also then reattach when the editing is complete.

  Thanks for your thoughts in advance!

  You can open a file by using a script, but you cannot specify the password file - open for her, if that's what you mean.

  In addition, you can apply a security policy to a file if it's going to be used in the drive, in Acrobat.

• Just upgraded to 10.0.2 and now he can't findwebsites - three that I know have been created with WordPress. IE &amp; Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank yo

  I get the following error message: gone the requested resource / is no longer available on this server and there is no forwarding address. Remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank you.

  Found the problem - it's a HT Access file on the site itself. Deleted the file and 10.0.2 works very well.

• iMac spinning Rainbow wheel appears each time I click on something and running extremely slow

  My iMac (27 inch, mid 2011) is gel/loading every time I click on something. This occurs on the simplest tasks such as the opening of the finder window, open system preferences, right-click on desktop etc.

  It happened all of a sudden a few days ago and I have not updated recently... I noticed this occurring has started after I opened the Photos Agent app for the first time and imported more than 1000 images/videos of my iPhone6. Could this be the cause of the problem?

  Memory is 4 GB and it has worked very well so far. I checked disk utility and you have no error. Activity monitor looks great too.

  Most important - looking the best way to backup or clone the HDD that I have a very important job out there. What is the best way to do it? I have a Macbook Pro, as well as with 100 GB free on it. Can I use it to help somehow?

  If someone could help me out that would be great!

  Mac form:

  OS X Yosemite 10.10.3

  Processor: 3.1 GHz Intel Core i5

  4 GB OF RAM

  More than 500 GB free 1 t

  iMac, OS X Yosemite (10.10.3)

  Here are my results of EtreCheck (sorry for the bad pictures but I was unable to open the browser to copy paste)

  

  

  

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• I'm looking for apps that I bought years ago

  I'm looking for a few applications that I bought years ago and may not be fArrondi in the story bought?

  If this isn't in your purchase history, and then he went.

  BTW, it was hidden?

• When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

  When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

  You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

  I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

• My iPhone says that the FBI is after me for something that I didn't do what should I do?

  I'm looking for these you tubers together because I've heard they have appealed a video service and when I clicked on enter the screen of my phone glitched and windows popped up on my screen and clear a WARNING of such iOS so I went to click on it, but I clicked only if I can get rid of him and he says alert the FBI became after me because I'm being accused for child * and I would never that it's really disgusting and I'm only 16 years old why I would do that if someone can tell me before they come knocking on my door please? Thank you

  It's a scam. Do not respond.

  Double click on the Home button, and then drag upward on the preview of Safari.

  Go to settings - Safari - clear history.

  Restart Safari.

  Phony 'technical support' / 'ransomware' popups and web pages