EAM_Analytics ETL run hangs

Hello

Recently, we changed our source ETL server. (love of Server1 Server2) the same version and same operating system. I configured the physical data sources and all the other connection strings to point to server2. Now, I am trying to run the EAM_Analytics_test DAC. The process began to say for example. 10:00. the poster State race for more than 2 hours with 37% complete. I can't log files in the SessLogs folder after like 10:20. What is the problem and how can I see it?

In the tab tasks, I see some jobs failed, but nothing has changed after 10:20.

Thank you

No. I don't have access to the source of the DB. But I found, someone changed the execution plan, so I rebuilt and then ran the load. Now loading failed. (Which is a good sign) I was able to trace the error, to a question of access which I am trying to solve now.

Thanks for the reply.

Tags: Business Intelligence

Similar Questions

How to restart a new comprehensive ETL run?
I started a comprehensive ETL run a few days ago, and there are problems, while the race was not over. Now I correct these problems and I want to start a refresh new ETL run. However, DAC, the current run is always the term failure and when I started the ETL, it picks up where it failed.

I have reset the database warehouse and truncated the table S_ETL_CURR_RUN. Restart the server DAC and DAC client. This does not work.

Thank you

Published by: user9175541 on August 25, 2010 09:37
On the current run screen, right-click on the track and choose Mark as completed.
Enter the confirmation key... and voila... you can run a different execution plan...

Or if you want to restart the failed run, you can choose the restart button. He will try to continue about to fail.

Antonio
Bexpert, Brazil

DAC message any plan of running - "Error when loading nodes"
I just install and configure Informatica 8.6.1, DAC, BI apps 7.9.6 properties for an instance of source Oracle Ebs R12.1.1

In informatica, I've defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names in the DAC's physical data sources

I mentioned the flatfile as 'ORA_R1211_Flatfile' parameter in DAC

After successfully build, when I run the ETL error "Error loading nodes" occurs.

the log file shows the following:

**********
BEGINNING OF ETL

--------------------------------------------
20 SEVERUS Sat Apr 23 21:57:58 GST 2011
FAULT INFO: Error loading of nodes.
CLASS EXCEPTION: java.lang.NullPointerException

com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
com.siebel.etl.engine.core.ETL.run(ETL.java:658)
com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
com.siebel.etl.etlmanager.EtlExecutionManager$ 1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$ 1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
21 SEVERUS Sat Apr 23 21:57:58 GST 2011
************************************************************
CLOSING THE CONNECTION POOL Data Warehouse

************************************************************

SEVERUS Sat Apr 23 22 21:57:58 GST 2011
************************************************************
CLOSING OF THE CONNECTION POOL ORA_R1211

************************************************************

23 SEVERUS Sat Apr 23 21:57:58 GST 2011
--------------------------------------------

END OF THE ETL
*****************
Hello

Mark the current as EP being completed and re - assemble portion, build parameters, and generate the EP and run charge.

Thank you
Navin KumarBolla

iBot scheduling after load ETL
Hello
We have a requirement where you want to run the iBots after completion of ETL daily. I'm new to working with iBots.

Some Martin suggested a use conditional query based on the last ETL run date. Can somone help me to implement this

If no other possible solution please advice.

Concerning

Sandeep
Hello
If I understand correctly, "Start immediately" is simply the starting point, you set options 'Récurrence', ' repeat every ' etc to repeat.»
Hope this helps, so useful please assign some points!
See you soon
Alastair

After EBS instance refresh events short authorization is broken

EBS r12 test instance has been integrated with short installation and running OK
The instance of the EBS has been updated from production.
Now the EBS tasks fail. Short server responds with ' HTTP/1.1 401 Unauthorized'
I deleted it and reinstalled the short installation program (1683053.1 Doc) while still having the same errors.
I see calls of EBS to short with a basic authentication header, but it is of course rejected by short
Step 'Integrate with EBS' has been ran, what Miss me?

Sorry - no has not come back and update... I missed a step-

Integration and System Administration Guide
Exit 12.1 V5
Reference No.. E37993-08

To enable the simultaneous graphs of ETL:
You must enable graphs Oracle short ETL run from Oracle E-Business Suite
as a concurrent request.
1. in Oracle E-Business Suite, set the FND_ENDECA_CLOVER_URL profile to option
http:// : 7006/clover.
2 run the script "storeCloverLoginInFndVault.sh" to add references of clover connection under
EBS Fnd Vault. The path is/u01/Oracle/quickInstall/bin/in Build - 12 12.1 V5 IQ.

Purge the cache of OBIEE in ODI

Hello experts,
I have ETL running on a server of the ODI and OBIEE running on another server (both Windows Server 2008 R2). I want to purge the cache of OBIEE in calling a batch file after all charges ETL are made.
What would be the best way to do this? Please notify.
Thanks in advance!

Hello.

I hope is not so late to help on this.

You try to use the Event of voting table.

Refer to this: http://gerardnico.com/wiki/dat/obiee/event_table

You just need to implement an ODI interface to load the table with the correct information to clear the cache (check Gerardnico message inserted properly in the event Polling Table)

I spotted a problem with that.

The UPDATE_TS attribute in the table must be unique, or in your ETL, you must ensure that no duplicate datetime will be inserted in this table. This attribute is the key for the purging of the Cache. This may seem ridiculous to say this, but if you use a bulk insert and variable with date information hour all your records in the event of voting Table can end with the same date time. This will cause a problem and your cache is not deleted.

See you soon.

suspended thread

Hello

I have a wire hanging problem. Due to audio problems I had to create a separate thread for play/stop Quebec. The problem I have is that if I close the window as my audio thread run() hang the sons and the app is running in the back end.

Any way to hang the window close? I tried to use the closing bracket, but my hook is not called. Here is my code for the AudioThread. Here, I have the ShutdownHook code. I don't know that it is an old problem.

package utils;

import java.util.ArrayList;
import java.util.Collections;
import java.util.List;
import java.util.concurrent.SynchronousQueue;
import javafx.scene.media.AudioClip;

/**
 *
 * @author Jose
 */
public class AudioThread extends Thread {

    ///////////////////////////////////////////////////////////////////////////
    //enum
    public enum Action {

        play, stop;
    }
    ///////////////////////////////////////////////////////////////////////////
    //private variables
    private static List<AudioThread> runningAudioThreads = new ArrayList<>();
    private AudioClip clip;
    private SynchronousQueue<Action> actionQueue = new SynchronousQueue<>();
    private boolean cancelled = false;

    static {
        utils.Log.debug("in AudioThread static block");
        Runtime runtime = Runtime.getRuntime();
        runtime.addShutdownHook(new Thread() {
            @Override
            public void run() {
                AudioThread.cancelAllThreads();
                utils.Log.debug("in ShutdownHook");
            }
        });

    }

    ///////////////////////////////////////////////////////////////////////////
    //constructors
    public AudioThread(AudioClip clip) {
        assert clip != null;
        this.clip = clip;
    }

    ///////////////////////////////////////////////////////////////////////////
    //public functions
    public static void cancelAllThreads() {
        List<AudioThread> copyOfAudioThreads = new ArrayList<>(runningAudioThreads.size());
        Collections.copy(copyOfAudioThreads, runningAudioThreads);
        for (AudioThread at : copyOfAudioThreads) {
            at.cancel();
        }
    }

    @Override
    public void run() {
        if (!runningAudioThreads.add(this)) {
            utils.Log.debug("in AudioThread.run, unable to add this to runningAudioThreads");
        }
        while (!cancelled) {
            try {
                Action action = actionQueue.take();
                switch (action) {
                    case play:
                        clip.play();
                        break;
                    case stop:
                        clip.stop();
                }
            } catch (InterruptedException ex) {
                return;
            }
        }
        runningAudioThreads.remove(this);
    }

    public void playClip() {
        try {
            actionQueue.put(Action.play);
        } catch (InterruptedException ex) {
        }
    }

    public void stopClip() {
        try {
            actionQueue.put(Action.stop);
        } catch (InterruptedException ex) {
        }
    }

    public void cancel() {
        cancelled = true;
        this.interrupt();
    }
}

Any help would be greatly appreciated!

Thank you
Jose

OK I solved the problem. The shutDownHook works. The problem was that I was getting an exception in my hook run(). The exception does not get sent to the screen, so I do not see.

Thank you
Jose

Problem with the config.ini instance
Hi all

I added a line code in my file config.ini to instance

< WebConfig >
< ServerInstance >
< ForceRefresh > TRUE < / ForceRefresh >
< / ServerInstance >
< / WebConfig >

According to my knowledge, it will be of MetaFrame query and cache the server cache not OBI... pls correct if I'm wrong... and that this change affects performance (slow down or delay) of the report have generated by the user.

pls advice... If there is some other way to use the passing the Presentation server cache server cache not OBI.

Thank you
Now can you pls correct me if I'm wrong after purging the server cache and * not ignitions presentation server cache * IBOT will take the latest data from the database.

Yes it will be latest data from DB and to your right. If you purge the server cache everything is cleaned and when MetaFrame is run, that he must speak to the BI server to fetch the details in order to accommodate the presentation server cache, as requested.

There is another method to purge the cache after each race AND, you create an ibot for the fire and by writing a custom script it purge old data and we need to plan sound after the ETL run... so it cleans the data and when the end-user is delivered the next day and want to see new data, it is there to see. It could help you
http://vivekkulthe.blogspot.com/2008/08/purging-cache-using-ibots.html

To improve the performance of reports, you can do this http://blog.guident.com/2009/12/many-dashboards-on-most-systems-can-be.html

See you soon,.
KK

6863699 patch applied or not

[appsprod@dbtest 6863699]$ /appshome/PROD/apps/tech_st/10.1.2/OPatch/opatch apply -invPtrLoc '/appshome/PROD/apps/tech_st/10.1.2/oraInst.loc'

Oracle Interim Patch Installer version 1.0.0.0.55
Copyright (c) 2006 Oracle Corporation. All Rights Reserved..

We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com

Oracle Home = /appshome/PROD/apps/tech_st/10.1.2
Location of Oracle Universal Installer components = /appshome/PROD/apps/tech_st/10.1.2/oui
Location of OraInstaller.jar  = "/appshome/PROD/apps/tech_st/10.1.2/oui/jlib"
Oracle Universal Installer shared library = /appshome/PROD/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
Location of Oracle Inventory Pointer = /appshome/PROD/apps/tech_st/10.1.2/oraInst.loc
Location of Oracle Inventory = /appshome/PROD/apps/tech_st/10.1.2/inventory
Path to Java = /appshome/PROD/apps/tech_st/10.1.2/jre/1.4.2/bin/java
Log file = /appshome/PROD/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log

Creating log file "/appshome/PROD/apps/tech_st/10.1.2/.patch_storage/6863699/Apply_6863699_05-13-2011_12-09-12.log"

Invoking fuser to check for active processes.


None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...


OPatch succeeded.
[appsprod@dbtest 6863699]$

It is said in above no fix measures if applies to the Home.OPatch Oracle will not apply the patch, out...

Here's the log for this patch

Creating log file "/appshome/PROD/apps/tech_st/10.1.2/.patch_storage/6863699/Apply_6863699_05-13-2011_12-09-12.log"

Starting OPatch Apply session at 05-13-2011_12-09-12.

Command arguments are: apply -invPtrLoc /appshome/PROD/apps/tech_st/10.1.2/oraInst.loc

OPatch version is: 1.0.0.0.55

The contents of the file: /appshome/PROD/apps/tech_st/10.1.2/oraInst.loc

inventory_loc=/appshome/PROD/inst/apps/dbtest_dbtest/admin/oraInventory



Performing RAC pre-req. check...


Accessing inventory ... (retry 10 times, delay 30 seconds each time)


System Command: /appshome/PROD/apps/tech_st/10.1.2/jre/1.4.2/bin/java    -Doracle.installer.invPtrLoc=/appshome/PROD/apps/tech_st/10.1.2/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30  -classpath "/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/appshome/PROD/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/share.jar:/appshome/PROD/apps/tech_st/10.1.2/jlib/srvm.jar" opatch/O2O "/appshome/PROD/apps/tech_st/10.1.2" "/appshome/PROD/apps/tech_st/10.1.2/oui" opatch.pl 1.0.0.0.55

Result:

output to OPatch:





NODE_LIST=NULL

NODE_COUNT=0
LOCAL_NODE=NULL

IS_CFS=0

RAC_CODE=0

HOME_INDEX=2



This is not a RAC system

Interim Patch ID: 6863699
Checking the patch inventory.

Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.1

Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.0

Bugs fixed by this patch 6863699:
   6116405 : AS11 CLASSIC - REPORTS MATS RUN HANGS

Reading patch XML files and doing sanity checks.

Read the command to action file map.

Performing initial safety check.

Invoking fuser to check for active processes.

Checking active processes:
Accessing inventory ... (retry 10 times, delay 30 seconds each time)


System Command: /appshome/PROD/apps/tech_st/10.1.2/jre/1.4.2/bin/java    -Doracle.installer.invPtrLoc=/appshome/PROD/apps/tech_st/10.1.2/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30  -classpath "/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/appshome/PROD/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/appshome/PROD/apps/tech_st/10.1.2/oui/jlib/share.jar" opatch/CheckConflict "/appshome/PROD/apps/tech_st/10.1.2/oui" "/appshome/PROD/apps/tech_st/10.1.2" opatch.pl 1.0.0.0.55 6863699 "6116405 " /orahome/6863699/etc/config/actions
Result :

SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.1

SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.0




None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...


OPatch succeeded.

Is the fix applied or not?

Salvation;

MISSING_COMPONENT: oracle.developer.reports.core, 10.1.2 (found a component of most recent version)

This House of Oracle has no components/versions required by the patch.

Please clearfy:
1. where to find this patch and where download you it?
2. What is your referance to apply this hotfix

It seems you are trying to apply the patch r11 r12 (or kind of this senerio)

Error say mainly conflict path with your version which means patch not to 10.1.2 and above

Respect of
HELIOS

DAC - FlatFileConnection.
Hello Experts,

I do the first installation of OLIVIER. The ETL run I am facing problem.
I followed installation of Gerard Nico documents and the installation/configuration went smooth.

ETL one parameter runtime DATASOURCE has been created is FlatFileConnection. According to the installation notes I chose the ORA_R1211_Flatfile value. But my only source Oracle Apps R12.1.1.

I get an error in the journal of Informatica's FlatFileConnection session as
Table of correspondence of CMN_1077 not found in the database.
Transformation of DBG_21524: LKP_W_PARAM_G_Get_ETL_PROC_WID
Table of correspondence of the DBG_21313: W_PARAM_G

BUT the look up table W_PARAM_G exists in the database.

Can someone help me how to solve this problem.

I can develop further if necessary.

Informatica: version = 8.6.0; HotFixNumber = 4
DAC Build YEAR 10.1.3.4.1.20090415.0146

Kind regards

~ Fabrice
Hello

If it's the result of hard code the "DataWarehouse" connection information, login information is entered in the link relational "data warehouse" does not equal the combination of TNS/schema in which you have created the tables in the warehouse.

Could you please post this again?

Kind regards
Marco Siliakus

RE: Portal downtime
I'm looking for suggestions on how others treat the situation below.

Our portal is front-end to our data warehouse. Occasionally, every night for the warehouse ETL processes fail. In this case, we don't want no Portal are available for our end users. Right now, manually run us a .ksh script that takes the gate to the pool of server and redirects the URL to an html file which update us manually with a notice "sorry." We would like to get to an automated process that makes it unavailable to the portal, based on the status of the ETL run. We use dbms_scheduler so we can access the job status via the programming perspective.

I would like to know how do you antinutritionnel the portal? Is it possible to conditionally redirect global home page to the portal to another page of portal or URL based on the results of an SQL query? Or do you know an API or documentation that can help me get started? Any suggestions are appreciated.

Oracle Portal 10.1.4
10.1.2 application server

Thank you
You can use the wwpre_api_value API to change the value of the preference for the home page comprehensive system. This will however show the 'Sorry' notice only when users access the portal by running pls/portal/portal.home. The standard URL/portal/page/portal // still works and users who know the name of the page group and page will always be able to access the page.

The average potential to solve your problem would be a redirect to the page in the Oracle HTTP Server:

1 create a new httpd.conf which includes a rewrite rule that rewrites the URL of the results page to view page sorry
2 create a script shell or perl script that retrieves the status of the job. In anticipation of the State, the script will allow the new httpd.conf by:

a copy of the current httpd.conf in a backup location
b adjust the httpd.conf with the redirection as active httpd.conf rule
c run dcmctl updateconfig TC - SST updated from the repository
opmnctl d call to restart the HTTP Server

Hope this helps,
EJ

Send an email when the report is updating
Hi all

Is it possible, in its responses, to send an email automatically when a report is be updated?

Thanks in advance,
LAU
You can do it several ways, as you said using the ibot also conditional. You should have the flag or flag in your database indicating that the ETL burden was made. Then based on a conditional query run an ibot. But the thing is after completing this ibot you will need to lower the flag.

Another easy way is to create a report that runs ibot, make sure that you have verified that the Oracle BI Server Cache feed checkbox save the ibot. At the end of the ETL, run a command that performs the work of ibot for you. There is a mode application command in Oracle BI called SASchInvoke.exe. This application will run the ibot for you.

Here's the blog that explains more in this regard.

http://oraclebizint.WordPress.com/2008/03/06/Oracle-BI-EE-101332-integrating-schedulerdelivers-into-other-applications/

-Madan

DAC decoupling HR and finance
Hi guru,.

I worked in the implementation of the BI applications earlier with finance, to supply and project anlaytics earlier, all tasks were tied up in a single execution plan.

However this project that I'm affected is having END and HR related to single execution plan. Environment of our customers, is to have load balancing active architecture, so I want to have separate execution plan of finance and time IE to run separate ETL in charge of finance and HR.

current configuration is as below.
• Human resources and finance are built in the same execution plan.
• The implementation plan includes six areas.
• The data loading is performed in the same database and the same pattern.
Environment: Oracle EBS 11.5.10, BI 7.9.5.1(HR Apps et finances), Oracle database 10 g

If the two are separate from enforcement of the CAD of the plan what are the impacts would be we face?

Also if the DAC servers are separated for the HR and finance, as well as if the schema of database of HR and finance are also separated, would it effect the counterclaim of the report?
That is to say in a separated environment will finance users can see/report dashboards for HR? and vice versa?

What other things need to be addressed before separating the finance and human resources (which are not under the same execution in CAD plan)?

Thanks in advance.
-Kamlesh
Are you saying you are going to use two different targets DW, one for HR and one for the end?

It seems that you plan almost like two separate implementations for the end and the other for HR where
It is the same source?
The target is different from DW or a different pattern of DW same (essentially it itwo Dw if your essential dimensions will be duplicated)

In this scenario all the tables of the base (dim and fact) will be replicated in the schemas and all the reports from data analytics both end and HR
must be replaced as a customization.

Here I put in doubt, if performance is a pilot, then separating HR and end (and therefore duplicate tasks which are common), I don't think you
will get overall performance gain. Have you compared the time by making separate HR and fin and both together in a single environment.
Perhaps you need to focus on the ETL run differential that the satellite on the separation of the environment based on human resources and the end. If you have large tables, then partitioning
makes large tables like w_gl_balance_f etc. can be used to accelerate incremental ETL.

Watch EP DAC could not cite error driver Oracle...
Hello

We have installed the Oracle BI Applications 7.9.5 in a customer environment on Oracle E-Business Suite Release 12 and a load running with seeded CSV file definitions. We have taken charge of "Full R12", and it shows that all 520 tasks are successful. However, the European Parliament shows the State as down. Here's the message comes from the log file.

............... Retrieved from R12 full of file DAC\Log log file...
959 SERIOUS my Sep 15 10:45:23 EDT 2008 pmcmd startworkflow u Administrator PEI * s - XXXXXX:4006 f SILOS - lpf D:\OracleBI\DAC\Informatica\parameters\SILOS. SIL_UpdateRowInRunTable.txt SIL_UpdateRowInRunTable
Status / / Desc: succeeded
WorkFlowMessage: Workflow executed successfully.
Error message: successfully completed.
Error code: 0
960 GRAVE my Sep 15 10:45:23 EDT 2008 ETL seems to have ended. Citing stop dispatcher after the notification of the last task running.
961 SEVERE MON Sep 15 10:45:23 EDT 2008 completion of ETL processes.
962 SERIOUS my Sep 15 2008 completed 10:45:23 EDT Dispatcher thread.
963 SEVERE MON Sep 15 10:45:23 EDT 2008
FAULT INFO: Error Failed: general executing ETL oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe (Loracle/jdbc/pilot/OracleStatement; JIIIZZZZ [SANDRINE [IF [B [ICN [SII [B [ICN [I [S [BIIIIZZ [Loracle/jdbc/pilot/accessor; [[[B [J [BI [CI [SIZ) I]]]]]]]
MESSAGE: Oracle. JDBC. Driver.T2CStatement.t2cParseExecuteDescribe (Loracle/jdbc/pilot/OracleStatement; JIIIZZZZ [SANDRINE [IF [B [ICN [SII [B [ICN [I [S [BIIIIZZ [Loracle/jdbc/pilot/accessor; [[[B [J [BI [CI [SIZ) I]]]]]]]
EXCEPTION CLASS: java.lang.UnsatisfiedLinkError

oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe (Native Method)
oracle.jdbc.driver.T2CStatement.executeForDescribe(T2CStatement.java:725)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1031)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1124)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1264)
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:148)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.etl.engine.core.DateTimeHandler.getCurrentDBTimestamp(DateTimeHandler.java:190)
com.siebel.etl.engine.core.DateTimeHandler.getDBTimestamp(DateTimeHandler.java:240)
com.siebel.etl.engine.core.ETL.updateRefreshDates(ETL.java:1224)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:399)
com.siebel.etl.engine.core.ETL.run(ETL.java:604)
com.siebel.etl.engine.core.ETL.execute(ETL.java:840)
com.siebel.etl.etlmanager.EtlExecutionManager$ 1.executeEtlProcess(EtlExecutionManager.java:211)
com.siebel.etl.etlmanager.EtlExecutionManager$ 1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
964 SEVERE MON Sep 15 10:45:23 EDT 2008
************************************************************
CLOSING THE CONNECTION POOL Data Warehouse
************************************************************
965 SEVERE MON Sep 15 10:45:24 EDT 2008
************************************************************
CLOSING OF THE CONNECTION POOL ORA_R12
************************************************************
966 SEVERE MON Sep 15 10:45:25 EDT 2008
--------------------------------------------
END OF THE ETL
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

We have all the installer such as mentioned in the installation guide. We missing something here?

Thank you
Srini
Try using Oracle (Thin) type of connection. These types of false errors are known to occur when using OCI8 thick aka type connections for the following reasons
-The client machine where the DAC server has a different version of Oracle as the database server. For example Oracle 9 client libraries to talk to the Oracle 10 database or vice versa.
-The client machine has several homes of oracle. You should not have this situation. If so, fix it.
-The ojdbc14.jar is been copied from somewhere else and so the incompatibility with libraries of client on the local computer. Try and use the ojdbc14.jar is found on the machine running server DAC.

Many of these problems have been solved by using a thin connection. Connection thin aka Type 4 drivers have the ability to talk to the database directly instead of via the client libraries using pure java.

If all else fails copy the ojdbc14.jar is on the database server computer.

When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

See this article--> occurs not in Safe Mode

Check and say whether his work after turning off hardware acceleration.

EAM_Analytics ETL run hangs

Similar Questions

Maybe you are looking for