EAP - SIM: 'no. VALID CARD or DRIVE WAS FOUND.

Similar Questions

• ELL Demension 2400-error: No. Hard Drive was found - 0

  I have one of the old Dell Demension 2400-achete nine in October "2003,

  Last week stood up this error on startup: "couldn't find any hard drive - 0 press F2 for set

  F1 to continue. "but he never starts.  and there are two quick beeps after pressing PWR.

  It is on a WIN XP SP 3

  What I've done so far:

  In error, as one of the options was to press F2, I did this and to load or open the BIOS Setup. I did it
  I Look'ed for the HDD in SATA 0, 1, 2, etc...

  Next I Open'ed, for the HDD, the option and check if the startup hard disk is displayed correctly. but there are no options to choose, (I expect said "Western Digital 250 GB" or something.

  At one point, I noticed that there is a CD in the drawer, however, I removed the seasonal and tried aagin and same error message.

  I put in a new hard drive, about a year ago and still have the old HDD
  still somewhere.

  What should I do?

  Thank you

  Computer-Geek

  The Dimension 2400 only natively IDE/EIDE drives, not SATA, unless you have installed a SATA controller card.

  The IDE hard drive is recognized in the installation system [BIOS]?

  The power button LED, green, solid orange, green, orange, flashing flashing or off?

  Check the sequence of the four Diagnostic Lights [marked A, B, C, D] on the rear panel, these are then at the two ports, PS/2 (mouse and keyboard).

  The Dimension 2400 Manual of use, troubleshooting and diagnostic Guide, is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-2400_service%20manual_en-us.PDF
    
  Bev.

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with viruses (s). Is this valid?

  Call from Microsoft

  Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with virus (s)

  They then read me coorrectly code full windows of my windows disc cover, sounds scary!

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• Is compatible card GPIB-GPIB-USB-B? If so, what card and driver?

  I have my written codes while I was using GPIB-USB-B to connect with HP-4145 of my PC win - XP.

  Now, I want to use a GPIB card instead of the USB version.

  1 - can use a GPIB card without changing my codes?

  2 - If Yes, then what GPIB card (and driver) should use?

  Thank you

  Yes, you can use another card without changing your code. As long as you used the VISA, you can use any desired GPIB controller. If you stay with the GPIB controllers of OR, you can use the same driver, you have now.

• orange sim and sd card holder

  My cliq keyboard stopped working so I got my replacement when I had the first thing, I noticed that the sim and sd card holder was orange and that the phone felt much more robust and the sliding keyboard is much smoother, the phone works fine now, but I was wondering if the thing is changed on this model and it comes into conflict with the Flash update

  You have received the new version of the phone that's all. If anything its better than the older and it will affect the upgrade. The reason why they changed the color was to make it more visible to people. They could have done more with it, but I have not heard of something else being changed. You call most likely came with 1.4.8 Blur version too.

• 14 - n204sf Pavilion: Pavilion 14-204sf has an AMD graphics card but driver update for a nVidia

  Hi, in my attempts to find a solution to my problem with the current for my Pavilion 14-n204sf graphics driver, I found on the web from the list of available drivers HP site in which the graphics driver is a Nvidia card in the machine is an AMD Radeon 8670 M as shown in the master database and reported in the control panel of the machine. What is the reason for this discrepancy? Do both adapters use the same driver or is this just a mistake - and in this case, where is the Radeon driver?

  Thanks in advance for your help.

  Hi @jlb21,

  Thank you for your inquiry.

  I understand that you upgraded your system to Windows 10 now looking a driver updated for the AMD Radeon 8670 M and there is not a list on the page of software and the driver for your model.

  If this does not work, you can try to install a driver on the AMD website, but can find that you do not get the same options as before.

  Drivers + download - drivers & Support AMD Center

  You may consider contacting HP support for assistance or perform recovery to factory.

  HP computers - performing a recovery of HP (Windows 8) system

  If you decide that option and that you don't create recovery media, you can get a kit of HP support recovery.

  Contact HP to Contact HP Support assistance

• IPhone 5s does support 802. 1 x EAP - SIM authentication?

  Hello, I have a question. IPhone ios 9 does support 802. 1 x EAP - SIM authentication?

  Hello hot_111,

  Thank you for using communities of Apple Support.

  It seems that since iOS iOS 5.1 devices supported authentication EAP - SIM of 802. 1 x. see this:

  You can integrate iOS devices in a wide range of RADIUS authentication environments. 802. 1 X wireless authentication methods supported on iPhone, iPad, and iPod touch are EAP - TLS, EAP-TTLS, EAP-FAST, EAP - SIM, PEAPv0, PEAPv1, and LEAP.

  More information and it is contained in the following article:

  Apple 802 technical white paper. 1 x authentication

  I found no information indicating that this support has been removed.

  Best regards.

• Card reader driver for hp 2000-2120TU

  Card reader driver for hp(2000-2120tu) for windows 8

  Hello:

  Here is the link for the card reader driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104710-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5293868 & sw_lang=.

• Satellite M70: Need mass storage controller & card reader driver

  First issue: I want to (mass storage controller) driver.
  Second question: I have the card reader, but it does not work.

  First issue: what you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com

  Second question: I assume that the material is not installed correctly. For this you must install TI 5 in 1 card reader driver.

  If you cannot configure all this use please livery recovery DVD and install OS. After that it all works again.

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• Hard drive was named as a backup drive. How to change the designation?

  Some how my hard drive was named as a backup drive. This prevent me to upgrade the operating system. How can I remove this designation without losing the information on my hard drive?

  The machine is iMac mid 2011.

  Thank you

  Change the name of the account and the name of directory on your Mac - Apple Support

  

• HP - Pavilion 15-268sc card reader driver

  Hello

  I own hp-Pavilion 15-268sc, runnig on Windows 7 - ultimate x 64.

  I have a problem with my card reader, this model is sold without a driver, I had to download all.

  But for the card reader, I can't find anything.

  So I used serching by Hw Id, which is

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2166103C & REV_01

  found a first also for HP P15 family and connected.

  But the result is unsatisfactory, card reading is quite slow, and sometimes, when I try to open the memory card, I get a message error that application not found.

  I hope so, I'm looking just wrong, and someone who is very kind, just after the good link here

  Thanks for advantage.

  Please uninstall the currently installed driver and try provided HP Realtek Card Reader Driver or Realtek Card reader driver for XP, Vista, Win7, Win8, Win8.1 (download location to choose for the first item in the list).

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• JMICRON card reader driver

  I have three "base system device" in Device Manager that aren't jmb38 (x) card reader host controller for:

  SD/mmc

  MS

  & xD.

  Where can I find driver for these downloads?

  Pavilion dv4-1431us

  Hello

  The card reader driver Installer is on the corresponding link below.

  Windows 7

  Windows Vista

  Kind regards

  DP - K