EAS admin user has no rights to create user

Similar Questions

• I have no admin rights on my account user has administrator rights!

  Hi all

  Clean install windows 7 on SSD, in the installation process, I made an account. Who has administrator rights. However I regularly get error messages (while trying to share or move folders or windows update) saying that I don't have the rights to do so.

  Check user accounts (I see my own (admin) and the comments which is disabled).

  Anyone?

  No, I'm afraid that the restriction of administrator UAC is there for good. Short of turning off UAC, you're stuck with right, click Run as administrator. FWIW, I need these privileges all the time but have accepted the warning of the UAC rather that turn off UAC. It may take a while, but sooner or later, you will get the UAC popping up when least expected. Be careful as acknowledging the warning when you do not expect his speech.

  If you prefer typing with the right mouse button, click on the main windows then type explorer.exe and press Ctrl + Shift + Enter. You will always get the UAC but may prefer this method to achieve this.

  In short, learn to accept the UAC as the price to pay to use an operating system also excellent that must provide the parental control for the lowest common denominator.

• I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

  I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

  Hi Anthony,.

  You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

  Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

  Provide the permissions to read and write to your identifier and then close.

  Then reopen Lightroom. You should be able to open Lightroom.

  Please let us know if it helps.

  Kind regards

  Tanuj

• The ADMIN user has not created in my Apex 4.1 installation

  No matter how many times I run apxchpwd.sql, I can't my admin login page to tell me anything except "Invalid credentials." When I checked APEX_040100.wwv_flow_fnd_user, I found that the table was empty. There is no line for ADMIN at all, so there is nothing to apxchpwd.sql update. What can I do to add the user? I use HTTP Server and modplsql, not Apex listener. Thank you.

  Near the top of your Setup log file is show "Procedure with a new installation." or "Do an upgrade installation."?

  If it is an upgrade installation, it does not create the ADMIN user. Maybe delete all versions of the TOP before installing the new version, as a previous version was perhaps not setup correctly.

• Cannot create or delete applications Essbase with the Admin user.

  Hello

  I'm running Essbase in version 11.1.2.3.505. For some reason, I can't create or delete applications in Essbase using the native admin account. I suspect it may be due to the fact that I wore recently users another environment via LCM HSS & that the roles were somewhat detached/altered in the HSS database. I checked that the commissioning for the admin user has full administrator for the Cluster Essbase HSS rights. The ID works very well elsewhere in the suite of the EMP, workspace, planning, etc. But the option to create or delete applications are greyed out. I have a workaround, where I can use a user newly created/configured to handle these tasks. I'm not sure how LCM would allow the superposition of the admin account properties in the HSS schema.

  FYI - check the table CSS_USERS, the creation date is the date of construction original (as well as all other indigenous users) - so I don't think it's relevant. I guess the problem would lie in CSS_PROVISIONING_INFO, CSS_ROLES, or a similar place. After opening a SR with Oracle, they recommended that I restore the entire schema I quickly rejected. He is not a danger, because I use the workaround. But it would be nice to have an overview of the pros on what is happening / what has happened.

  Thank you

  Mike

  Wow, that's weird.  What do you see on the side of Essbase (rather than look at Shared Services) If you "appear privilege user xxxx;" in MaxL?

• Vista admin user account has been disabled.

  I changed the password on my admin user account. After I clicked ok, my computer froze. I had to force him to stop. After the reboot, I can log in using my standard account, but when I try to enter my password for the admin user, it says that it has been disabled and I can't access it. I tried to restart in SafeMode several times and I still have the same problem.

  When I click on "user accounts", the only account that I can see is the standard. When I press the link to change other accounts, he asks the admin password. I can't even pull it up to display the password.

  I tried to download a program to hack password on internet, but I can't get my computer to run from the CD player (went into the BIOS and made sure the CD drive was listed first), so it does not work. My computer knowledge is very basic, so I'm afraid I'll just mess up as much.

  I use a Dell Inspiron 1501. I can no longer update my security programs, start the CD (games) or download anything without administrator rights. Any help is greatly appreciated.
  If I posted this in the wrong place, please let me know.

  Hello

  Do not hit the space bar, just press ENTER.  If a blank password is empty is not equal to a space.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The admin user doesn't have access to the Standard user account files

  OK, I'm lost.  It's crazy.

  After reading the reasons to do most of your work on/as a Standard user, I created a user account (quite a while) and have been using it since--and perhaps the way I did have this problem.

  If I remember correctly, this is how I did it.  I had a LOT of files under my old ID admin, so I created another Admin account and then replaced by former Admin account is a Standard user account.  I have been connected and makes every slot the user account Standard since then, with Windows poping a request my Admin password whenever he needed.

  Today, I needed to change a tax return of 2013 - and when I reloaded TurboTax last year and needed to get the State program, TurboTax wouldn't, claiming that I need to be logged in as an Admin user (I have not the popup asking my Admin password).

  OK, here's the problem.  When I have users to switch to my Admin account, after the passage, almost all the icons on my desktop disappear AND there are only a couple of files in my files of Documents Libraries\Documents\My.

  Everything to go.  I thought as an Admin user, I had access to everything.  How can I get all this stuff back (the icons on the desktop for example and other user account files, etc.)

  When I was logged in as an Admin user, it seemed that I could share files with other Useers - so I thought, Aha, that's how it works.  So I logged on my Standard user account - but the ability to share my files, etc. did not exist, at least as far as I can tell (that is, cannot find this option anywhere).

  If all goes well there is something simple that miss me that things work so that as an Admin user, I have access to other user accounts where - it is supposed to work, isn't.

  Obviously need help.  Thank you.  Ron in round rock

  In fact, I have nothing - as stated in the above comment, I could see all my files and folders User\ron

  -> This either means that the folder is already shared, or that UAC (User Account Control) is disabled on your PC. This isn't a good idea because it exposes your computer at serious risk.

  I can edit, delete, running back, I can't (or maybe since I am the only user on this machine, I should leave him alone).  Just curious as to what I did exactly.

  -> If you have shared with read/write access, you can create/edit/delete the files.

  And finally, as an Admin user, I have only 4 icons in the taskbar (IE, Chrome, Windows Media Player and Windows Explorer) - that doesn't sound right.

  -> You'll get exactly icons you placed here while it is logged on as admin user.

  And really Finally, with regard to the disappearance of all the icons on my desktop when logged in as Admin user.

  Each user has his own profile. Inside the profile, there is the user's desktop. Desktop shortcuts that are visible while connected as user A are not visible when you are logged on as user B because each user has his own office!

  There is one exception: most applications require at installation time if their shortcuts must be visible by all users. If you answer 'Yes', then the shortcuts will go into this common folder: C:\Users\Public\Desktop.

• Difference between built in Admin users and assigned to the Administrators group.

  I'm trying to use a printer on Remote Desktop Services OPOS driver.  My computer is Windows 7 and Server 2008 R2 64-bit.

  If I remote as the built in Admin, driver utility works correctly.  IF I log in as a user assigned to the Admin group I have error claim OPOS.

  I tried to copy the user information in the case where the user data has been corrupted.

  Can you please explain, shed some light on how and why w/Admin user rights do not work on the opos utility.

  The hidden administrator account does not have the UAC filtered token as other accounts admin "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot connect to my admin user

  I'm the admin user on our computer. It has me locked. The message said: "the service user profile Service has no logon. Failed to load the user profile"I try a different password, wrong and it says wrong password try again. I'm loogged on one of my children, but need to get back admin administrator. I tried under that user to change users, but nothing happens when I give the password in the admin loggin. Can someone help me please.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help: VISTA is only in BLACK and WHITE for the admin user

  I went to another user in a game that worked well, but when I logged in this user and back in my usual admin user account, every day the screen is black and white while charging. Everything still functions very well except there is no color - all settings in the control panel and NVIDIA Control Panel suggests that it is the color display. If I connect to another account the color returns. Unfortunately system restore has been disabled for some reason any so that I can't restore to an earlier time. I downloaded and re-installed the latest driver for my graphics (NVIDIA 260 M GTX), but this does not solve the problem.

  Google search suggests some people have had this same problem, but still there are no solutions. Any help much appreciated.

  Hi Krisbell1,

  Try to change the theme and see if it makes a difference.

  1. Open theme settings by clicking the Start button, clicking on Control Panel, appearance and personalization, customization, and then click theme.
  2. Under theme, select the theme you want, and then click OK. Bottom of the form

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Bindu S Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Where can I find THE "SEND TO" folder (which has things like < Office create a shortcut >), so I can add add my own send to options that is send to my documents - my pictures.

  Where can I find THE "SEND TO" folder (which has things like < desktop="" create="" shortcut=""> ), so I can add add my own send to options that is send to my documents - my pictures.

  This isn't how it's done.  There is such a file, but customizing the send option in the context menu is a little more complicated that just add entries to this file.  Here is the procedure:http://www.vistax64.com/tutorials/67599-send-context-menu.html.  In fact, if you are interested in adding move to a folder or a copy of a folder specifically, the following article may be also useful: http://www.vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html (even if it would be any folder and you need browse and select which one you want may not be exactly what you're looking for (although know it may be something you also want to add) but the first article will include the ability to add a folder of) specciic to send it to the menu as well as other programs and just about anything you want).

  Also another clue.  The contextual menu has more options you see when you right click on an element to access.  Try to hold the SHIFT key when right-clicking on an item and you will see an expanded list of options that can include something that willl help you.  It does not the question asked you (the first link above did that), but it is linked and I thought that I have it add in case you weren't aware, and where it is very convenient at a given time.

  I hope this helps (I'm sure it will).  A suggestion - be careful how you add to the context menu.  Not that it has a limit or something like that, but add the more you more it will be difficult to find whatever it is you are really looking for.  It is easy to get carried away and end up with a menu that is so crowded it defeats the purpose to save time with shortcuts.  Try only to add the options that you use often enough that the feature will really help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What locations on the drive C can write non-Admin users?

  I am writing an applicaton that I would save temporary data on the C drive.  The request may or may not be run as an administrator, and I would like to know if there is a particular place that non-admin users can write in Windows 7 or Windows XP.  Any help on this?  A link would be most appreciated.

  Thank you

  Mike

  I was hoping that kind of something like user data or Application data.  The application folder was created at installation.  What is the standard for the development of the app?

  The standard in Windows 7 is "C:\ProgramData".

• Interactive reporting error: "Server [0] error: database connection information is not Accessible." Processing is disabled "when Non-Admin users open a BQY [ID 1389849.1].

  Why this document is not really accessible?  I have a user with this issue RIGHT NOW, and I can't access the document to help.  Does anyone have the text of this document available in a place that is truly accessible?

  I was able to access only the ID research: Doc ID 1389849.1

  Good luck.

  1. connect to the workspace as an admin user.

  2. right click on the ECO, click on change permissions.

  3. Select the user/group and give at least 'see' access to the ECO. (Otherwise you can give view permission in the GLOBAL group).

  4. closing session as an administrator.

  5. connect as a nonadministrator user, open the BQY in IR web client.

  6. it opens correctly.