Cannot connect to my admin user

Similar Questions

• Cannot connect to my admin account and cannot change my standard user to the admin account

  I have 2 log ons, as administrator and the other is a standard user. Something happened that doesn't allow me to connect to the admin. Profile, but I can't the standard user and when I go to user accounts and you're trying to change that one to the admin. privileges, it doesn't let me change the account type. I recently purchashed Defender Pro 15 in 1 more all-inclusive anti-virus. Previously I was using Avira Antivir free House as my anti virus with no problems for a year or two, but then this happened if I installed the Defender but I can't access to half of what I need to do is no not Admin, any help would be greatly appreciated!

  Hello

  did you uninstall Avira before installing Defender Pro?

  2 aVs installed will cause blockages of the system or problems

  "Something happened that doesn't let me log on.

  and you don't give an error message on your admin account opening

  We need error messages to help you

  Uninstall Avira or:

  try a Safe Mode system restore to before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Cannot connect to my admin account!

  Windows Vista SP1 - after you install the update for IE8 (KB976749), I'm able to access my admin account ("service user profile Service does not have the logon - user profile cannot be loaded")!  How can I solve this problem and the newspaper on my admin account?  Thanks in advance for the help... Should I just try to inunstall the update and then see if I can connect?  Or is there another way to access my admin account (via the command prompt maybe)?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "Windows cannot connect to the service user profile service.

  SOMETIMES, when I log onto an account says "unable to connect to the user profile service service."  When I log into an administrator account, it displays a black screen and an error that says that my office has been denied access.  It began quite recently after I transferred all my gear in a new case.  I don't know if this has something to do with it.  I spent hours researching this and I can't find a way to solve the problem.  Help, please!

  Hello

  Since you don't have any attempt to Restore Points tapping F8 you can start and select last known good configuration
  Configuration.

  -----------------------------------------------------------------------------------------------------------------------

  If that doesn't work try these - such as using Safe Mode ADMIN and/or the hidden ADMIN account.

  Even if these aren't exactly the same methods please check solutions.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  =================

  If necessary:

  Make sure that all Windows Services are set to default values.

  Start - type in the search box-> find Services at top - double click.

  BlackViper - Services (value all default values)
  http://www.blackviper.com/WinVista/servicecfg.htm

  =================

  You might what to do that - an InPlace upgrade/repair facility that helps keep the
  programs and data backups redundant but are always a good idea.

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot connect to my limited user accounts

  When I try to connect to user accounts my children it gives me a message "Windows cannot login because your profile cannot be loaded.
  I tried to delete the account and created a new, but it still doesn't let me log on. I was prevoiusly. Help, please. Thank you

  Windows XP
  Media Center Edition
  Service Pack 3

  Hi retired_55,
   
  Follow the steps in this article to resolve the problem:
  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based

• Cannot connect to the admin page of R6400 laptop, only on iPhone

  I installed a new router R6400 but can not access the admin of my laptop page. I was able to access it from my iPhone, so I am able to connect to the internet.

  I have talked to support 2 or 3 times and they always say the same thing: reset the router, type 192.168.1.1 in the address bar, try routerlogin.net or routerlogin.com, ping the router, check the IP address, etc. etc. I even tried to simply connect to the router via an Ethernet cable and still no go.

  Is someone can you please tell me why it does not work? I have read both articles, and they all seem to be saying the same thing. I just want to be able to access the admin of my laptop page. Someone at - he found a solution to this?

  I activated just improved Protected Mode and it worked. Don't know if it's the best solution (saw where to uncheck enable protected mode was an option too), but at least the admin site open - finally!

• SBS 2008 cannot connect with the admin account

  Hello

  I have intalled SBS 2008 on my server. Yesterday he installed updates, now I can't connect using my administrator account (it says wrong user name and password). The only way I could log in with my credentials is hollow in Safe Mode.
  The server is used as a controller of domain, MS Exchange and the file and printer sharing. None of these processes work properly. I can access the drives mapped to the user's computer and Office does not connect to Microsoft Exchange.
  I appreciate any help you can give. Thank you.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot connect to my Admin account! Help, please!

  Today, I made an account on my laptop. I don't know much about computers, and unfortunately, I am not a Curmudgeon. I have Vista, and now I can't log my original administrator account. I get the "the user profile Service service has no connection, failed to load the user profile" and my laptop came with a Vista so I don't have a CD for Vista or anything right now I use my guest, account and I am PANICKING!

  Someone please help ASAP! and please make it simple enough for me to understand. :)

  Thank you very MUCH SO!

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I forgot windows log password and cannot log in with the user or administrator

  I forgot windows log password and now cannot connect.  Tried the user administrator connect you, who did not have a password and was not able to connect with either.  I'm the only person using this computer.  Help, please.  Thank you

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Unable to connect with the sysadmin user applications

  Hi all
  
  We cannot connect to applications with user sysadmin
  
  check all possible alternatives of there we cannot connect and finally we program the password by FNDCPASS
  
  VERIFIED SOLUTIONS:
  ==============
  (1) locked account - no.
  (2) Guest user password - valid and check with to validate the password function
  (3) checked tablespace APPS_TS_IDX space - enough space available
  (4) checked signon profiles all who are very well
  (5) No person changed the password before there is no activity for 2 days
  (6) active in fnd_users and all are looks good
  sysadmin 7) validation through fnd_web_sec
  
  Select apps.fnd_web_sec.validate_login ('SYSADMIN',' & pwd') of double; -display "N".
  
  Finally reset us the password with fndcpass but the customer claim the CAR for that matter
  
  Please give me your valuable inputs to this so that it will be useful in the future to support
  
  
  
  Thank you
  Pavan

  Hello

  So in my case the hash value has been changed according to the post above to right?

  In your case, the password has been changed and this has changed the hashed password that is stored in the table. When you have provided the initial password, the FND_WEB_SEC hash and compares with the hashed value and it returns N because the hash values do not match.

  Can U please tell me how this change in the hash if no users changed the password earlier?

  It represents the value has changed because the password has been changed or the hashed value has been changed manually.

  Thank you
  Hussein

• Cannot connect as Admin user in a new installation of the workspace 2.0

  I was hitting my head on my desk and I was wondering if I lack just something. I'll put in space 2.0 using EGGS and when I set up the username admin and the password that I can not make it unique. In fact, it uses my newspaper AD in when I don't even have these setting again. If someone could just tell me how to change that, it would be great. Thank you!

  Jared

  Hi Jared,

  Thanks for the clarification. The user name on the license key cannot be changed, it is hardcoded to "admin". You can use this user name and password to connect to the ISU following Admin

  https://Configurator-VA.domain.com

  https://connector-VA.domain.com/HC/Admin/

  https://gateway-VA.domain.com/SaaS/login/0

  If you want to connect to the admin of https://gateway-va.domain.com or https://gateway-va.domain.com/as an administrator, you must log on as a user you specified as the Bind DN.

  https://gateway-va.domain.com/SAAS/login/0 and https://gateway-VA.domain.com/ admin that both take you to the same functionality. The only difference is that the former allows you to connect as a user no AD.

• Unable to connect to my Admin account user account problem

  I CURRENTLY HAVE 3 USER ACCOUNTS ON MY COMP. RECENTLY, I AM UNABLE TO CONNECT TO MY ADMIN ACCT. THE OTHER 2 ACCOUNTS ARE FINE. MY COMP. ME SAYS MY LOGON SERVICE FAILED AND THAT IT IS UNABLE TO CONNECT. I ALSO HAVE PROBLEMS WITH MY JAVA SCRIPT AND FLASH PLAYER, THEY ARE ALL TWO ACTIVATED BUT RCENTLY AFTER UPGRADEING TO NEWER VERSIONS ME SAY THAT I HAVE NOT THE DOWNLOADED ON MY SYSTEM. HAVE TRIED UNINSTALLING AND REINSTALLING BUT STILL NO HELP.

  If this work does'nt try this link, it looks like a fix for this problem.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htm

  MCP. MCDST. LVL 80

• cannot connect to my user account

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot connect to all accounts under windows 7 Professional. Too locked admin account.

  I'm trying to connect my Windows 7 Professional computer. Normally, it ignores the screens account all together and auto connects when I turn on the computer. My account has no password. Today, when I booted up it he went into a log on screen with my account and 'another user' option I've ever seen elsewhere. I can't log in to my account. When I try it says he said: "you cannot connect because the ögon method you use is not allowed on this computer. See your network administrator for more information." There are no other accounts on this computer and I have an account admin is there something I can do? I can't do everything. Thank you!

  Hello

  -You're on a domain network?

  -Have there been any changes made on the computer before the show?

  -What happen when you try to connect through the other user? You are able to boot to the desktop?

  I would suggest trying the following steps and check.

  Case 1: Group Policy "" Allow the local newspaper"was not set up to allow users or users of the domain. Configuration allow users or domain users to connect to the computer or the domain, you must add users or users of the area to "allow the local newspaper. Please follow these steps to add users.

  1. Run gpedit.msc.
  2. expand Configuration ordinateur\parametres securite\strategies windows\parametres
  3. click on user rights assignment
  4 4 veiller ensure that "Allow the local newspaper" includes administrators, backup
  Operators, domain users or users.

  Case 2: Group Policy "'Deny log on locally' has been installed to deny users or users of the domain. For the installer allow users or users in the domain to connect to the computer or local domain, "Deny log on locally" must be empty or no user or users of the domain in the list. Please follow these steps to remove users or users of the domain of the 'Deny log on locally '.

  1. Run gpedit.msc.
  2. expand Windows Settings\Security Settings\Local Policies
  3. click on user rights assignment
  4. make sure that "Deny log on locally" is empty.

  Case 3: Local group policy allow for user logon. However, group policy domain that overrides the local policy does not allow users to log on locally. The resolution is to modify the domain policy to allow users to log on locally.

  Case 4: The domain policy allows domain users to log on locally, but is not the local policy and domain policy does not apply to the computer. The fix is running gpupdate to force the update of the domain policy.

  Case 5: Norton Firewall blocks communications between the domain controller and the client. The solution is to disable Norton firewall or reconfigure to grant access to the domain controller.

  It will be useful.