Easy transfer will not go in Sata drive D:

Using Easy Transfer of 64-bit Windows 7 system to another system of 64-bit Windows 7. New computer has OS installed on 125-GB SSD HARD drive and Easy Transfer wants to use this player. How do I ask him to transfer files instead of D 2 TB SATA drive? (I tried the solution to use an external hard drive, but easy transfer to tell me I have not enough space, when in fact much more than 1 TB is free).

http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

The instructions are basically the same, regardless of the version of win

When restoring, you can select the location.

Persoanally I would'nt using WET, but transfer manually

Tags: Windows

Similar Questions

Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

Hi PTTimothy

1. what operating system is installed on the computer?

2. you are the administrator of the computer?

I suggest you to check and to provide us with the information about the installed operating system.

http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

Step 1:

You can open the administrator and verify if you can open Windows Easy Transfer correctly.

You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.

Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

Step 2:

An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.

Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833

I hope this helps.

Windows Easy Transfer will not work for me between my old laptop with Windows XP and my new laptop with Windows 7.

I am trying to transfer my files to my new laptop with Windows 7 for my old laptop with Windows XP Professional, using the Windows Easy Transfer, that I found on my old laptop. I tried to make the transfer through my home wireless network and when that did not work... I connected the two laptops with a cable (the same style of cable, used to connect his computer to a modem or router, not a cable SSB).

So in summary, I just want to transfer all my files from my old laptop to my new laptop. I copied the master file of my data from my old laptop on a "stick" assuming that I could download just to stick to the new laptop. (I have a lot of "sticks" here.) The idea did not work, of course, results otherwise wouldn't ask this question now.

If you had previously copied simply data (documents folders) via a key files should be no problem during the copying of that stick to the library on win7 locations, and is there's this which is exactly the err MSG?

T61p will not identify new SATA drive

Hello

I recently bought a drive Seagate Momentus 7200 RPM 320 Gig - http://www.seagate.com/docs/pdf/datasheet/disc/ds_momentus_7200_3.pdf (on sale at Best Buy for $99 - who could resist that?)

If the disc in the drive Bay, it works perfectly - Vista sees the complete concert 320 and it works without a doubt faster than my main 5400 RPM 160 Gig of support. However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive. I checked in the BIOS - the only SATA setting I have is to toggle between 'AHCI' and 'Compatibility Mode' and in each framework, I get the same result - the BIOS does not recognize the drive.

Model T61p - 6459-CTO

Vista Ultimate 32 bit

Latest available BIOS and system drivers installed

Any help would be appreciated.

emotivecto wrote:

However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive.

What exactly you are doing when you are installing the drive as primary?

The symptoms you describe seem to indicate that the disk is not docked in the Bay.

See you soon,.

Bill

the transfer will not find my user account

My XP workstation has my profile with a dot in the name such as "user.systemname".

Easy transfer will not find this user account. I was trying to rename the profile, but the system won't let me not renaming the directory that I do not have enough permissions or something is in use.

How can I get an easy transfer to recognize a profile with a dot in the name?

Like Windows 7...

Create a new user account and transfer your files and settings to the new account.

See: http://fredcoulson.com/blog/fred/index.php/2007/08/15/renaming-your-windows-xp-user-account/

Note: The easy transfer will not migrate type .dat and .tmp files

J W Stuart: http://www.pagestart.com

If that were the case, might as well the user simply copy the content of the personal folder under C:\Documents & Settings of an external hard drive.

Question is the part of a domain user account? If so, that may be why he won't let you rename (without permission).

If you are, I recommend the UN machine in the domain join then rename the account.

laptop will not allow new hard drive

Laptop HP 2000-2b19WM will not again take hard drive, no parameters in Bios to allow to change the SATA or IDE drives I activated the legacy... support any help would be appreciated...

OK, that makes sense. Starting with Windows 8 key Code is built into the BIOS. If you could get an OEM of Windows 8 drive you can install it and it just works (activate) without needing a key Code.

And if she has had 10 Windows activated on this subject, you can reinstall Windows own 10 and it will activate only as soon as it is connected to the internet.

Easy transfer does not recongize. MIG file

I replaced the drive in my Dell d830. I gathered my files on the external hard drive. When I run easy transfer on "new computer", it does not recognize the file in the box go. I can see it on the disk, but it does not load. Help?

No, easy transfer does not have XP to XP.

Is the old hard drive available and functional?

Have you ever used Windows Easy Transfer to copy the files to your external drive?

If you used easy transfer AND your original drive is no longer available (or dead), you may be able to recover the data, but there is no guarantee.

Microsoft technical support may be able to help--for a fee. Alternatively, you can Google MigRecover Utility. However, I understand that there are different versions of the file creates MIG Windows Easy Transfer, but this requires different versions of the tool (I think USMT4 is for the version of Windows 7 to WET and USMT3 for the version of Vista, but I don't know for you).

Sorry, I have more new and good luck.

PS Si the old drive is not actually dead, your best bet is probably to buy a USB or FireWire external drive box and copy the data directly.

We made an update on all the pc company and going from XP to 7. Easy transfer does not seem to see computers that aren't on the same network segment.

Try using the simple transfer of transfer from old pc (XP) user profiles to their new pc (7). Easy transfer does not seem to see through switches. If I have 2 machines in different parts of the plant the application will not be the handshake. What I am doing wrong?

Nothing. The 'old' and 'new' computers must be on the same subnet. You can use the intermediate storage.

I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

Help with my computer of dumping

I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

Windows 7 will not recognize the dvd drive

Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.

It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?

Hello

If the drive is viable:

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

==========================================================

After the foregoing:

References to Vista also apply to Windows 7.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951

Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Windows easy transfer is not easy and not transfer

I just bought a new PC and wanted to transfer from the old. Both are Win 7 Home Premium. I used the option of Windows Easy Transfer connect network, both computers are on my home LAN. The transfer took 6 hours. I thought I had deleted all the jpg files, but they always fell on (only losing 5 hours of my life over a copy of disc). IE9 settings were there - but that's the thing is useful. The direct e-mail settings simply had not been transferred. I installed Live Mail and it is just empty. I tried to copy only through details of the user, but it was no more successful and he has DELETED ALL JPGs PREVIOUSLY COPY. Thank you MS for your attention and respect for your customers and your complete product tests! Oh, and copy the stuff of direct mail by hand requires extreme care. The export option "all folders" will retrieve only AN email at random a few records at random. Totally useless.

Try to create a. MIG file on the old computer and save it on an external hard drive, then start the transfer of files to the new computer and then point on the. MIG of the file and restore it:

http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

Windows Easy Transfer does not

I got a new computer WIndows 8. I want to transfer my data from my Windows 7 computer. Easy transfer works on windows 7 but not 8. When I pull up on the 8 I have the question Yes or no. Yes constituting the data is already on a drive hard and being that I have not used before. If I click No., it closes. It brings me to another menu as it does on windows 7. I want to transfer data via wifi.

Transfer files and settings with Windows Easy Transfer in Windows 8

Windows easy transfer supports several methods to transfer your files and settings.

You can use Windows easy transfer to transfer information to a computer running Windows 8 computers with one of the following operating systems:
- Windows 8
- Windows 7
- Windows Vista
- Windows XP Service Pack 2 (SP2) or Service Pack 3 (SP3)
NOTE: Windows Easy Transfer cannot transfer files between a 64-bit version of Windows and a 32-bit version of Windows. Instead, the files must be transferred manually using external storage devices. To find the version of Windows on your computer, see the is the Version on my computer 32-bit or 64-bit Windows
? support document.
Step 1: Determine the best method of transfer

When you transfer files between Windows XP, Windows Vista, Windows 7 or Windows 8 computers, choose a method that works on both computers. Windows easy transfer supports the following transfer methods:
- External hard drive or USB flash drive: to use a USB flash drive, you need a USB port on each computer. If you use an external hard drive, it must be compatible with both computers.
- Easy transfer cable: you need a special USB cable designed to work with Windows 8 and Windows Easy Transfer and a USB port on each computer. If you don't have an easy transfer cable, you can order one online or get one at an electronics store. The easy transfer cable is supported on Windows XP, Windows Vista, Windows 7 and Windows 8 computers.
  
  NOTE standard USB cable: A cannot be used to transfer files and settings between computers.
- Network: both computers must be connected to the same cable or wireless network and both computers must be able to share files and folders.
To decide which method to use, consider the amount of information you will sit. If you are transferring everything from all users on the computer, or all of your user account files, an easy transfer cable, external hard drive or a network works well. If you transfer only a few files or folders, a USB works well.
Step 2: Open Windows Easy Transfer on the new computer in Windows 8.1

All the following steps on the new computer from Windows 8 to open Windows Easy Transfer. You must be logged in using an administrator account.

NOTE: before performing the following steps, unplug both computers to the Internet and temporarily disable any firewall software that may be running.
1. From the start screen, type transfer to open the charm of the search, and then select Windows Easy Transfer in the search results.
  
  Figure 25: Selection Windows Easy Transfer
2. In the Welcome screen, click Next to continue.
  
  Figure 26: Windows Easy Transfer welcome screen
3. In the window that you want to use to transfer items to your new PC , select the method to use to transfer items.
  An easy transfer cable: a special USB cable, you can buy to transfer files from one computer to another
. You cannot use a regular USB cable to transfer files with Windows Easy Transfer.
- A network: transfer files over a network.
- An external hard drive or a USB flash drive: use the storage space on an external hard drive or USB key.
Figure 27: Choosing a method of transfer
In the window PC which are now automatically using , click This is my new PC.

Figure 28: Indicate which computer is used
In the window you need to install Windows Easy Transfer on your old PC , choose to install Windows Easy Transfer on the old computer.
- If your computer uses Windows XP or Windows Vista, click on my old PC running Windows XP or Windows Vista. Go to the next step.
- If you have already installed Windows Easy Transfer on the old computer, click I already installed on my old PC. Skip this section and go to the collection of files and settings from the old computer .
- If your computer uses Windows 8 or Windows 7, click on my old computer is running Windows 7 or 8. Skip this section and go to the
  
  Figure 29: Choose the operating system for Windows Easy Transfer options
- On the screen, How do you want to install Windows Easy Transfer on your old PC , select the location to save the Windows Easy Transfer files to install on your old computer. If you use an external hard drive or a USB flash drive, plug the external hard drive or a USB flash drive in the new computer and then make the selection.
  
  Figure 30: Choosing a method to install Windows Easy Transfer
- Follow the on-screen instructions for the method you are using.
- Navigate to the folder on the external drive, a network, or a USB flash drive to save the files Windows Easy Transfer, and then click OK.
  
  Figure 31: Find the folder of files to transfer
  
  Windows Easy Transfer copies the files and displays the progress onscreen.
- When Windows Easy Transfer is done copying files, a window opens instructing you to install Windows Easy Transfer on the old computer.
  
  NOTE: do not click Next until you have installed Windows Easy Transfer on your old computer and saved the files to transfer to the new computer.
  
  Figure 32: Installing Windows Easy Transfer on your old computer
- If using an external hard drive or a USB flash drive, remove it from the computer.
Maybe you are looking for
- Tecra 510CS HD size max
  
  HelloCan someone tell me what size HD can be put ina Tecra laptop 510CS. The standaard 1.3 GB brokedownwards. I try 6 GB but it back doesn't seem to work.I try to format the 6 GB to 2 GB in FAT, but not joy.No idea any information welcome.Best regard
- Samsung Galaxy s3 video calls on Skype
  
  Video calls cannot be made through Skype on my Samsung galaxy s3. It is not even an option to make video calls. Is it possible, this can be corrected? Thank you
- I get an error dw20.exe reports box which appears randomly when I'm on the internet.
  
  I get an error reports box which opens randomly when I'm on the internet. How can I remove or whatever so I don't get my internet connection stopped whenever appears the dw20.exe on-screen error? RONALD OTOOLE STILL NEED AN ANSWER I can't follow your
- Unknown device in Device Manager after upgrade Pro Win8!
  
  I have a HP Pavilion dv7-6b32us laptop. I just installed Windows 8 Pro. I looked in Device Manager & I now have an unknown device. I installed all the drivers, so I don't know what that would be. How will I know? I enclose some screenshots. Thanks fo
- How to use substr and instr, where the line of input Multi text
  
  Hi allwithdata in the form of)Select ' Mary America.1234 Southridge Park Dr... Samna Lorie.MO.31234..' double valUnion of all theSelect 'Bill Johnson.Apartment 3 b. Sterling.VA.20166.3 Plaza Falke' of the double)Selectregexp_substr (shipping_instruct

Easy transfer will not go in Sata drive D:

Similar Questions

Maybe you are looking for