ScanJet Pro S3000 S2: HP Easy Scan does not connect to Google Drive

Similar Questions

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them

• My Mac Pro and HP Deskjet 3070 PowerBook does not connect via a wireless network from dorm

  Both my laptop and printer (an all-in-one) are connected to the same wireless network dorm, but they do not connect on it.  They connect only wire using a USB cable.

  I have for the MacBook Pro and the Deskjet printer IP addresses but no way to use to establish a connection.  I don't have access to the network router.  When I test the connectivity, the software tells me, "too many networks."  He can't make a choice!

  Interestingly, I have my MacBook Air along this journey, too, and the two MacBook have no problem of communication on the same network of dorm.

  Is it possible to plug these devices such as computers connect or should I remain attached to the USB cable to use my new printer?  I guess you know how I feel about this.  Thanks for your advice.

  You are right.  There is no way to bypass security protected by password and thus to connect a Mac to a Deskjet 3070 via a secure network without access to a router, and a password.  However, even without access to a network or a router, there is a workaround solution.  In my case, where the technical ability to correctly configure the router and the printer is beyond the understanding of the management of the dormitory, qualified through the difference to happen anytime soon, it is the answer I need.

  The solution is to build your own Mac + network printer and make it private, protect it against unwanted entry.  This offer you little mobility in the area of the printer, which is much better than nothing.  A sofa can be more conducive to creative thinking as an Office Chair.  The unconventional twist that Johnny introduced the user, the printer that generates the sender-recipient, not the Mac network.  Very smart.

  I refer you to the thread,

  "Deskjet 3070 cannot connect to the ad - hoc network (Mac)"

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/DeskJet-3070A-cant-connect-to-ad-hoc-network/m-p/1446819#M38598

  Then the only question is to know how to connect your Mac on the Deskjet 3070 printer via the generic (as he calls it, "ad hoc") network created by the Deskjet printer.  The Mac has abundant features for this purpose.

  Thanks for the categorical assertion, however.  No sense to break down the walls looking for a nonexistent hidden tunnel...!

• Storage space does not connect to a drive

  Whenever I have restart my computer storage does not reconnect to one of the disks.

  If I take the cover off of the computer unplug and reconnect the drive (all voltage) it recognizes the drive, but I know that the drive is connected, it is recognized by the Storage Manager Marvel that it is connected via a PCie 9230 wonder.  I unplug the connector SATA Marvel made the player not connected and when I plug again, it recognizes the drive, at this point storage spaces reconnects readers physical and made available again assigned storage space.

  I have a motherboard ASUS P8Z77 - V Premium.

  Edge Liteonit LMT-32L3M (general storage)

  On the edge SATA ASUS:

  SSD Samsung 840 PRO boot disc

  Blu - Ray burner

  2 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  On the menu of PCIe 9230 Marvel

  1 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  3 x Western Digital WDC WD30EZRX-00DC0B0 3 TB drives (readers of pooling of storage)

  It's the 3 TB drive on Marvel Port 3, which is not recognized at startup, but is on disconnect/re-connect.

  The system has worked well for several months, but has just started to drop the disc.

  I can't keep the lid and UN-plug/re-plug the disc each time.

  is there a problem with storage space as the BIOS recognized the drive as a startup just used Windows connect until forced.

  Hi,
   
  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro
   
   
  Please do not hesitate to contact us if you have other questions related to Windows.

• Internet does not connect to Google Sites?

  My family knew well poor internet for about a month and yesterday that we had a new router and now the internet in our home. With the exception of my MacBook Air. Loading of some sites, like apple's site and my favorites loading (sometimes), but I can't at all google search. Can not I use YouTube, gmail, etc.. I know there are a lot of similar problems, but they are not as accurate as mine. This problem is not only on Chrome, Google pages does not work on Safari and Firefox.

  I have a trustworthy application that I can sweep through files and find viruses, and it showed clean.

  I also tried to re - download Chrome, no change. I tried on other accounts of Chrome, and I tried to empty my cache and my story and nothing. I tried completely restart my computer, let it remain closed, I checked the updates on the two Chrome and the computer itself, but nothing.

  Works very well in our internet, it's super fast on my iPhone and on my family member's computers. Although, if I disconnect and reconnect to the internet, and then immediately as he reconnects, I update the page loading pages. Sometimes, I have to do this several times for pages to load. It's not really ideal. Videos don't work at all, the refreshing splash page.

  The strange thing is - I can still receive and send emails, I can connect to the origin to play Sims 4, can I still use iMessage, etc.. This isn't a problem with the internet.

  This computer is only around the age of 9 months, and this is the second time I had a problem with the internet (the last time the IP is wack but it attaches somehow after a month or two).

  I'm racking my brain for a solution, I need to be able to use internet, most of my homework is on the internet.

  Help, please!

  (Home: the error message I get on Chrome)

  

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. Search inside the files with the name of this form:

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the above files, back up all data, and then drag the files - nothing - to the trash only. You may be prompted for administrator login password. Close the Finder Windows, and then restart the computer.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically and runs without direct user intervention. This is not necessarily bad.

  2 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  3. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  4. the trouble may have started when you have downloaded and run an application called "MPlayerX." It is the name of a legitimate free movie actor, but the name is also used fraudulently to distribute VSearch. If there is an element with that name in the Applications folder, delete it. I do not recommend to install the genuine "MPlayerX", because it is hosted on the rogue 'SourceForge' site and is bundled with other malware.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• printer 5530: scan does not connect to the server

  Can not scan documents. On my printer screen appears "there was a problem connecting to the serverI.

  The cords are properly pluged. Router is working as wel as internet connection. Please help me solve the problem

  Hey @Jola34,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you are having problems with the help of scanning to E-mail on your 5530 desire. I can help with that. To resolve this problem:

  1. Turn your printer off.
  2. While the printer is turned off, unplug your router for a minute.
  3. Once you have internet connection try once again scanning to Email.

  If allows you to analyse then we will need to do the following:

  1. On your printer, click the icon in the upper left corner that looks like a tablet with a phone beside her.
  2. Click settings.
  3. Click on delete Web Services.
  4. From the main screen, click the icon at the top left again.
  5. Click on accept.
  6. Click Yes.
  7. Try scanning to E-mail.

  If your printer is connected to your HP account logged (for ePrint or instant ink) we need to add back.

  1. Connect to your connected HP account.
  2. Click the devices tab.
  3. Click Add a device.
  4. Add the printer back by entering the claim code that was on the printed paper earlier.

  Let me know if you have any questions. If this resolves any then please let others know by clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Windows 7 Pro PPTP VPN 807 error and does not connect to the remote server, XP machine connect without problems

  I'm just set up my new windows 7 laptop (Dell Precision M4400) running windows 7 Professional and VPN are not working, they're always bombing with error 807.  "The connection between your computer and the VPN server was interrupted."

  I created a PPTP connection in order to connect to my workplace and connecting I continually receive an 807 error.

  To check my internet etc is work that I have connected to the same place through my existing XP laptop computer (DELL precision M4300) which has the same VPN settings.  Everything connects aok.

  I'm also running ESET as my anti-virus and firewall and that you have disabled it to test (normally I have no problem running this and is also running on my XP laptop).  I also confirmed that windows firewall is turned off.

  I connect wireless at home, internet works fine, firewall has not changed at each end (I manage both ends) and such noted works for my machine also running more XP wireless.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Note to resolve this problem, we have a support professionals who are well equipped with the knowledge on Windows 7 issues, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think

• Calendar (lightning) does not connect to Google Calendar

  I read this article: https://support.mozilla.org/en-US/kb/using-lightning-google-calendar , but I still seem to have some difficulty getting flashes to work with Google.

  All I'm trying to do is to get read-only access to the calendar (read/write would be ideal, but it seems provider for Google calendar was not compatible with Thunderbird/Lightning for awhile), if I did the following:
  -Made my Google public calendar
  -Copy the iCal URL
  -Created a new calendar in lightning using the Google iCal URL

  I tried all possible combinations of "http" / "https" and iCal and CalDAV, without success. None of my events/appointments will appear in the lightning at all, even if calendars are created "successfully."

  I use:
  -Mac OS X 10.9.2 "snipers".
  -Thunderbird 31.0
  -Lightning 3.3

  Any help with this would be greatly appreciated.

  There is always a compatible version of the provider for Google calendar available on AMO. You need version 0.32 for 3.3 lightning.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/provider-for-Google-Calendar/

  Alternatively you can access your Google Calendar via CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• Try to create per-click agreement that does not preview in Google Drive

  I created an agreement click following these instructions: creating a right click in a PDF document

  However, I don't want recipients in order to be able to get a preview of the document in Google Reader which is what happens when I send the PDF file as an attachment. How can I make that happen?

  You cannot control this Reader PDF uses the recipients.

• HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

  1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start.

  2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start.

  Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD.

  I tried and does not work:

  -different, another USB port USB cable

  -new installation of 64-bit Win10

  -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall

  -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it]

  Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work.

  Any idea or suggestion?

  OK, here's the solution that works for me:

  YouTube

  In brief

  -check out you the shape of the package files (winrar will be required)

  -HPZstub.exe (NOT run Setup.exe)

  problem solved...

  I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2.

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• HP Laser Jet Pro M127fw MFP: HP Laser Jet Pro does not connect to applications so I can't scan

  All of a sudden my printer connects to the apps, so I can't scan. He linked it to the good apps until all of a sudden it stopped. I turned the printer power off and power on. Tried turning off the power applications, then on but it does not connect. I'm connected wireless. What can I do?

  Hello

  Make sure you have the latest firmware to keep the connection of web services:

  http://FTP.HP.com/pub/softlib/software13/printers/IPG/M125/LJM125_M126_M127_M128_Series_FW_Update-20160622_signed.dmg

  The last firmware datecode is 20160622, you can find the current firmware for your printer datecode by clicking Setup > reports > report of Configuration.

  The current datecode is listed in the printer information section.

  Kind regards

  Shlomi

• HP Officejet 6700 Premium suddenly does not connect to my Macbook Pro more

  Hey everybody,

  I got my HP Officejet for over a year and it has always worked perfectly. It has a stable wifi connection. Yesterday, all of a sudden the printer did not respond, so I asked my brother, who is the type of an It'er and removed the printer from the "Print & Scan" system preferences. Now, however, it will not be added more. As I said, it doesn't have a stable wifi connection, and I can see the presence of the printer when I click on the plus to add a printer, but then, if I want to add it, it says "cannot communicate with the printer at this time." I rebooted the computer laptop and printer and even left stop for the night, but it does not work. Nobody knows anything else to try?

  Thank you very much in advance

  Hi Elizaanne,

  I understand that you are having problems with HP Officejet 6700 Premium does not connect to your Macbook Pro.

  The router must sometimes be recycled.  I unplug the router, turn off the printer, shut down the computer.

  Turn on router wait 5 min and turn on the printer and the computer.

  Check the printer if the Wifi is STRONG.

  Open Preferences system, Print and or print and scan pane. If you see the printer listed
  Click Printer button remove. It will ask for confirmation to delete printer.
  Click on add it or + button, select the MFP Hello not Fax. Adding that should update the drivers.

  If the Wifi of the printer is not fixed, you will need to reconfigure.

  1. Press the power button to turn on the printer.