? ECRA R10 - 10W - model screen

Similar Questions

• Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

  I have some old Tecra R10 - 10W

  Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

  How to reset the password of the bios and is also required for cmos battery and I can do it myself?

  I thank...

  You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
  Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

• Tecra R10 - 10W - crashes with the nVidia display driver

  Dear Sirs,

  Two days ago, I bought my new Tecra R10 - 10W. I used the recovery disk to put Windows XP.

  However, I get a blue screen randomly. I turned on the 'Check' tool and I got: error of e/s in wmiaci.sys system. Error 20th in B9B8752F. I figured that the nVidia driver and uninstalled it. The problem disappear. But when I try to install on your site the appropriate driver: display - 20081110130507.zip the system blocks blue with the same error.

  Please help me.

  Hello

  Which is really strange, buddy

  Hmm, I think that before installing the display driver you must clean your system using CCleaner. This freeware tool removes the old driver files and cleans up the registry. Then, restart the installation of the laptop the latest driver on the official website of Toshiba.

  Furthermore, you also update the BIOS? You can find it on the Toshiba site too. :)

• Problem with module 3G Tecra R10 - 10W

  Hello

  I got a new Tecra R10 - 10W a month ago.
  Until yesterday, the 3G module worked fine. This morning I got a blue screen on the end of Windows. After the computer restarts I heard the tone of conecting/disconecting some USB device several times. After the short survey, I found my 3G module enabling / dissabling every few seconds.
  In the control panel/phone options and modem, I found two modems broadband TOSHIBA is on COM3/COM4, 'away', or 'Non-functional '.
  I installed all the new software up to date, as it was shown on Toshiba TEMPRO, bur after that restart the computer got the same result.
  Later, I had Windows termination screen again.

  Please let me know what is the problem and how to solve?

  Best regards

  Hello

  Something seems to be confused at the top on the system
  Maybe it was a new update reported by Tempro. Who knows.
  Always is it that there is an error in device (3G) in Device Manager

  I think you should simply remove the 3G (high-speed modems) module from the Device Manager and reboot the laptop.
  After the new reboot the operating system should recognize the deleted devices and should install it again
  In most cases, it helps to solve these problems

  But if you're not going to succeed, I recommend uninstalling the software from the 3G module, then you must clean the BONES and the registry with a free cleaning tool (i.e. CCLeaner).
  Reboot several times to ensure that everything has been properly cleaned and finally try to reinstall this software again

  Mate good luck

• Tecra R10 - 10W PCI configuration simple controller-Wireless manager

  I have a Toshiba Tecra R10 - 10W. I installed win7 and in Device Manager, it cannot find the driver for "PCI configuration simple controller.

  Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  Perhaps these two errors are connected.

  Thank you

  Hello

  I think you need the driver Intel AMT controller (Intel Active Management Technology).

  As far as I know, you can download this driver Toshiba driver European page or the page of the Intel driver.
  In this case, you will need to search for Intel Management Engine Interface driver

  > Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  WLan is not 3G use Fn + F8 to toggle the WiFi, Bluetooth and 3G.
  I think you have to press this combination of button several times to get the right setting

  Welcome them

• Tecra R10 - 10W - cannot create partition during installation

  Tecra R10 - 10W I and I went from Vista to XP. I used the Windows XP Toshiba Recovery for this disk.
  I was not able to create the partition on the hard disk during installation.
  I wonder I missed something?

  How to cut my hard drive into 2 parts? Should I re - install XP for it?
  Please help me?

  Thank you

  Alper

  Hello!

  As Akuma writes it of not possible to create or modify partitions of HARD drive during the installation of recovery Toshiba.
  The Toshiba Recovery disk contains an image of the factory settings, and after that you can change the size of the partition yourself.

  I also use Partition Magic and it works really well. If you n t have this tool, you can Google for a freeware tool. ;)

  Good bye

• How to change the HDD in Tecra R10 - 10W - any instructions?

  I would like to install windows 7 on my laptop R10 - 10W, but for now only for test.
  I would like to save my current installation of Windows XP on my HARD drive.

  The simplest solution is to change HARD drive but this laptop has no available HARD disk. :-(

  I tried to boot from the HARD drive connected via esata, but it is not functional. :-(

  Anyone have an idea?

  Thanks Karel

  > More simple solution is to change the HARD drive, but this laptop has no available HARD disk
  What do you mean by inaccessible HARD drive?

  If you want to install the Windows 7 only for the test then you don t have need to change the HARD disk or delete the Win XP from the HARD drive.

  One solution might be to an installation of Win 7 on the second partition.
  Create a partition on the HARD drive using a 3rd party like Partition Magic 8 tool. This great tool and allows you to create and manage the partition.

  Another option would be the use of virtualization.
  You know the Virtual PC?
  http://www.Microsoft.com/Windows/Virtual-PC/

  It helps you to install each operating system that you want on the HARD disk without having all partitions.

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

• Satellite C850D-10W - upgrade screen, black Win10, bios not start

  Hi all

  I have a Toshiba two years C850D-10W, which came with Win7 Premium. After several months of flashing notice suggesting to upgrade to Win10, I decided to give it a go. I was stupid enough to not not to check if my phone would support these updates, and I have not discovered too late that it would not be on the official website.

  This subject happened is that during the installation process, to halfway through (maybe 43%) I got a message saying that the system should reboot several times. The problem is, it never exceeded the stadium to restart, and the system is now in a loop by which underscore fixed unblinking appears in the upper left corner and stays there for about five seconds. Then the system restarts and underscore appears again, and so on for ever, no logo Toshiba, no chance to select Safe Mode, nothing. I can enter the BIOS menu and I tried to boot the system from the backup DVD I did when I bought the computer so I could go back to Windows 7 but it does not work, the system just does not recognize. The HARD drive is fine, I got out and opened it on another computer as if it were an external hard drive and all the files are still there, but I can't do anything else.

  Any help would be much apprectiated, thanks a lot

  Hello I had the same problem
  so my solution c is a restoration of the Pc with the reinstallation Cd
  Pour the info I pence that the pc Ref satellite are not compatible with Windows 10
  You Cdt

• Tecra R10 - 10W - charge when the battery fully

  Hello

  I have this laptop for a few weeks and his strange behavior. Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.
  Does anyone have a similar experience?

  Other portable wait until the battery level reaches about 95% before loading. Is there a way I can influence this behavior? I guess that this short of frequent charges is not good for the duration of battery life.

  Thanks for your opinions.

  Hello

  > Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.

  As Akuma has suggested, it's a normal question.
  Nothing unusual, because the battery loses power even the laptop is turned off.

  Here is one of the Toshiba articles:
  + Why my laptop loses 2 to 4% of its energy from the battery whenever I turned the unit off and turn it back on? +
  http://APS2.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• Tecra R10 - 10W / R10 - 111 3 G module problem

  Hello

  Module 3G does not work after the update. NA? find answers online. Maybe you know what to do:

  When I start the system from scratch, I just open the software Connect from Toshiba and the laptop connects after the network authentication. Usually after a certain time the yellow triangle with exclamation point appears and from that moment the system is connected limited/locally only. When I use vista tools to set up the problem I get the message that there could be a problem and I should connect via another network (lan, WiFi, BT, a? ¦) a? not really a solution to my problem!

  To restart the internet I need to disable the Toshiba g 3507 module and stop the wireless software Connect, wait about 10 seconds and then re-enable the module and restart wireless connect software. In fact, there is no option in the turn off the TPM in the wireless not connect software. When you work with my laptop, I need to reconnect it several times per day and this very annoying. Toshiba could not help me? They told me to call the hotline!

  I did all the updates that are provided by Toshiba, but it does not change.

  Any idea?

  See you soon
  Patrick

  Maybe the SIM card is loose, have you tried reinstalling the SIM card?

  Have you also updated the BIOS?

  Did you install any other software that may be contradictory? (For example, a USB 3 G external or similar device)

  Have you tried running the recovery to reinstall Windows.

  If it still does not work, then it might be a hardware problem, in which case you will have to send the laptop to an ASP for repair. The list of ASP can be found on the Toshiba site (the site of www.toshiba-europe.com assuming you're in EU)

• Tecra R10 - 10W / R10 - 111 3 G module problem see also messages from May 25

  Thanks for your fast replay.

  Yes, I have tried to reinstall the SIM card and updated everything what is possible from the homepage, Microsoft and Toshiba. No external devices (e.g. 3 G USB) installed and windows is retrieved by a full licensed Windows Vista Business (No. Toshiba OEM more) just a couple of days.

  The only thing I discovered is that the 3G module Firmware is not updated. I didn't recognize the pop-up window when before updating, but yesterday, I got the day when/after massage:

  "Generation data has not changed, probably failed update"

  I tried to update with an activated, a connected and a module 3G disabled (in that order) but no change. I always get the same message once the module is restarted during the FW update. The module was not disconneced by stopping the system or any other stop option during update FW (as read in the instructions). The old FW was working fine until I did some updates to the Toshiba homepage (always ask Tempro). Any idea?

  Control on while you try to update the firmware with the original image of Windows from Toshiba?

  Where did you got the firmware?

• Z5C model unlock Non-responsive screen

  I recently bought the Z5C and chose the model unlock instead of a PIN.  Although top - slide the unlock screen to get to the model screen works perfectly, it takes 3-4 attempts to get the configuration screen to respond, and sometimes he starts to draw a model to halfway to the model.  After feeling locked out of my phone several times, I went to open it PIN.  I'm under Anroid 6.0.1.

  UPDATE.

  Sony support recommended download Xperia companion and reinstallation of the operating system.  Wiping the phone clean and start over seemed like a drastic measure to take, but after enduring this agony, this problem is solved.

  I also had problems with the "answer call" causing calls to be rejected and backup not recognizing not entered in the calendar of events in motion.  These issues have also been resolved.

• HP Pavilion 2205sa g6: replacement screen for HP g6-2205sa

  Hi guys,.

  Please can someone let me know what model screen I need to replace on a g6-2205sa? (Not Prodcut. D1Q47EA)

  I had a glance on the HP site part Surfer and workshop of HP parts, but shows no results for the laptop. If I could just find something that is compatible, I would be very grateful.

  Kind regards

  Hi @angerz,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you want to replace your laptop screen, but were unable to locate the part number. You have tried the part store HP and HP part Surfer without success. When I checked HP Pavilion Notebook PC Maintenance and Service Guide of g6 , the display is replaced on the subcomponent level.  Please look at Chapter 3, page 18. Display Assembly components. If you are unable to locate the part in two HP parts store or HP PartSurfer then try a search on the web with the part number. Please keep me updated on your progress.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts, click on the " ""Twww.Mountainview.rsb.qc.ca Up " "" give me a Kudos.

• Satellite R10-101: 300 GB USB HDD does "jump up" automatically

  Hello

  I have a Satellite R10 - 101 Tablet PC.

  I wanted to back up my hard drive by copying an image of my entire hard drive on an external USB hard drive.

  I got a 300 GB hard drive on a Windows XP SP2 desktop machine, mounted the drive in a USB2 enclosure and the player properly connected to my laptop.

  However, whenever I connect drive USB2 HARD it does not 'jump' automatically and whenever I want to access it I have to go to disk management and to reactivate (it always seems offline).

  I have no problem with my Ipod 60 GB (with video), or with usb flash drives.

  I unchecked the box in System/Device Manager / USB Root Hub that says allow windows to turning the unit off. I also tried to reassign the drive letter of the USB2 HARD drive but still no luck.

  In addition, when you boot the pc with Acronic True Image to backup my HARD drive embedded it does not recognize the USB HDD...

  I have the latest BIOS and all windows updates, my laptop supports these external hard drives type of?

  I can try to make it work automatically (e.g. be visible like a F:\ for example when it is plugged into the usb port)?

  To make it more interesting, I have the problem on both Satellite R10-101 models which I admit, but my other laptop computer dell Latitude 4 years ago recognize the USB2 HARD drive automatically, please help!

  Raphael Malikian

  OK, thanks for the Nice info.
  It s useful for other users.