Edit a message

Similar Questions

• Editing the Messages in the project file changes the original date of the email to the current-how date can I change this back?

  I often need to change the subject line in the emails received or sent previously. I do this by editing the drafts folder and then moving them to the storage in another folder. When I edit the original message the original message is replaced by the current date in e-mail header. This means that the message is now 'Out of Place' when I search on the Date. Screenshot attached.

  You might find it easier and have fewer side effects, if you change the object with one of these modules:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/edit-email-subject/

  https://addons.Mozilla.org/en-us/Thunderbird/addon/header-Tools-Lite/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Hooray, you can now edit your messages!

  Thank you Todd S.

  You have a period of 10 minutes after you first post a message in order to change it.  It has been like this for as long as I can remember.

  If you wait too long, you will no longer have the ability to change the menu options.  If you have the Edit option and start editing, but don't actually submit your editt until 10 minutes have passed, then you end up with an error message saying as time expired.

• Windows XP Home (edition) a Message flashing flash start "OSD Locked" How do I clear it?

  I use a Genunine Windows XP Home (edition). When you start the system, a message flash on the screen "OSD Locked". In addition, my system is very slow and in the Middle, it is not me to open the resulting Task Manager.

  Kindly offer soloution

  With respect,

  Rigaut

  email ID: * address email is removed from the privacy *

  Your OSD locked problem isn't a XP problem - it's a question of monitor Dell which you can read here:

  http://support.Dell.com/support/eDOCS/monitors/r83546/en/Setup.htm#using%20The%20OSD

  The short version is here:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&product=374665&DLC=en&docName=c00306984

• BlackBerry smartphones can not edit sent messaged

  I am forwarding a message. before emailing, I'm editing it but can't do anything. How to delete, for example, certain words or the sender of the message?

  Maybe there are any application able to help me on this?

  Yes, you need thirdparty app named 'ForwardWithEdit '.

• The community edition error message sign

  I get error message there is no document template for the e-mail (Adobe ID) you provided. Please contact [email protected]. when running Adobe Community Publishing (Beta), I can't sign in.

  Hi, Bojan,

  I apologize for the confusion this has caused.  We have removed the Community Publishing application.  You can no longer use the AIR app on your computer to create and edit documents.

  All of the content that you have created will still be available on Adobe.com.

  Kirsti

  Community team help & Learning

• Digital edition error message

  Several times, I've installed and uninstalled Adobe Digital Editions.  I get the screen, but when I try to use it, I get the message: "Error getting license.  ' Server communication problem: E_ADEPT_REQUEST_EXPIRED.   The time / date on my computer shows the current date and time.  I tried several times to install using your site as well as my public library site and always get the same message.  Please tell me what I have to do to get it installed.

  Anngulley I would recommend that you post your request in the Adobe Digital Editions forum.

• Editable error message

  I have a model DW (CS3) that gives an error message when you try to create a new page using the template: "you have made changes to the code that is not marked as editable. If you keep these changes, they will be lost the next time you apply a template to this file. You want to keep the changes from here?
  
  This message is displayed as soon as you create the template page and save. I see the cursor in the code view and it clearly starts inside editable tag. I have same crreated an alternative model from scratch and still get the message.

  The page is valid. DW error on min-height of a div element in the css file, but it isn't an impact of the browser that uses my business (it is an internal site).

  I did some more tests with the creation of pages and update the model to see if changes are pushed out and it seems to work fine.

  Thanks for the help.

• No software will be installed or removed. -Can I edit this message?

  
  

  After asking around, I was informed that this chain is actually a part of the resources included in setup.exe (not a DLL). When you generate a distribution, setup.exe is created by copying and renaming \National Instruments\MDF\BinRTE\msisetup.bin [data]. I tried to load this file into a resource editor, but chains appeared as parasites. I think it is maybe due to compression.

  Unfortunately, I can't not support or you lead in this approach. You may be able to find a tool third 3rd which allows to decompress/edit resource strings.

  I looked into the status of the request that I filed (#112285) when you first posted this thread, and it had been rejected. I have reopened and linked this thread so that it can be reconsidered.

  A. Mert

  National Instruments

• Cannot install Office Ultimate 2007 due to the editing error message

  Description of the problem: I have a desktop computer that I built from a kit of WGA (Windows XP Pro with Service Pack 2). This machine is an AMD based system and I had installed SP3 that caused a problem without end. I did a fresh install of XP and you have not installed SP3. This machine has everything installed at the origin of the office suites. I bought an Office 2007 Ultimate on m6mobile.fr store and tried to install it but always comes an error message: "Setup error: the language of this installation package is not supported by your system." I tried to install the software on a second DVD player, but I get the same error. I tried to install the software on my Sony Vaio laptop and it seems to install without any problem but I did not install, I just want to check if the software disk is defective. The laptop has XP Pro SP2 also. Any information or assistance be will greatly appreciate.

  I could solve this problem by copying the contents of the disc on my c drive, open the folder and clicking on Setup.

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Is it possible to edit the messages that are automatically created when recording a demo of software?

  I want to change standard text messages which are automatically created when recording a demo of the software.

  

  Is this possible? Where can I find them?

  This text is generally controlled by the RDL files located inside your Captivate installation folder.

  

• "Insufficient content for edit" Error Message

  First, when to perform a three point edit, I'd get a box of dialogue "Fit Clip" who asked me if I wanted to 'ignore the Point Source', 'Point Source output ignore', etc. Usually, I take the same option so I checked the box that says "use this choice." If a change does not exactly match the settings I set universally, an error pops up saying: "insufficient content for edit.

  I can't find a way that cancel without wiping my own settings. Is there a way to bring this initial dialog Save? Thank you, all.

  

  I've never seen this error before. I guess that screendump is not yours?

  There is a checkbox under general in the preferences.

• Captivate 5 edition error message: not enough memory

  Hello

  I am during the test program for use in our society, and I fight about this error message in Captivate.

  I ask the question here in hopes that someone has an idea if this error message is a problem of my workstation, or an Adobe Captiva 5 problem:

  

  This message occurs when to publish the swf file, after compression and insertion of labels of swf file, and save the swf file (according to the messages in the progress bar from publish window).

  The project conditions

  • 20 slides
  • Each slide contains about 5 s of captured full motion video and audio
  • 10 text captions, some zoom and 3 text animations

  I use

  • Adobe Captivate 5 (test)
  • Windows XP SP3 (Dell Latitude E6410, Core i5, 4 GB RAM)

  Tried to change some settings, close the programs, restart. Still the same message.

  This isn't a real system, old or weak. I use other programs successful here with huge images and videos, and of course I get an upgrade of the company's computer for that, this post is the last chance for the program...; (o)

  Thanks for all the ideas...

  Ulrich

  Try to uncheck the options in preferences > SWF and the quality of compression SWF size and see if that allows you to publish correctly.  Sometimes one of these preferences can trigger this type of error on a given hardware configuration.  First of all try to uncheck both, so if it works, try to tick, one at a time to see if any compression option is open to you.

  

• Editing error message

  I'm just starting using InContext Editing in CS4. I created a page briefly last month and everything worked very well. I turned my attention to it again tonight and when I try to edit a page (ctrl-E), he tells me through pop up that the service is currently unavailable. Anyone know why?
  
  ~ Clay

  Hello

  Please try force - refresh your browser and clear the cache of the browser and let us know if you still have this problem.

  Thank you
  Florin