EDITABLE GALLERY - for the customer

Similar Questions

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.

• trying to cancel my plan, how do hard, would facilitate respect for the customer, it is a parody

  trying to cancel my plan, how do hard, would facilitate respect for the customer, it is a parody

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• How gemfire locator can be configured to return the full DNS name for the customer?

  We have an index running before 2 cache servers,

  Locator.DomainA == > Server1.DomainA, Server2.DomainA.

  the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

  How gemfire locator can be configured to return the full DNS name for the customer?

  in gemfire.properties, Locator attribute is full domain name already.

  Thank you

  Yao

  There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.

• How can I get the download instructions if you buy a new computer and edit programs for the new device

  How can I get the download instructions if you buy a new computer and edit programs for the new device

  Download the CS6 products

  Mylenium

• I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  Refer

  Using creative cloud | Install, update, or uninstall applications

  If previously produced was not uninstalled properly then you can required to run CC cleaner once the tool and remove them

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• Base table for the customer in R12

  Hello
  
  What is the name of the base table for the customer in R12?
  
  Thank you
  GSM

  Please see (absorption of the projects of the TCA Architecture in version 12 [417511.1 ID]).

  Thank you
  Hussein

• Editable for the customer model?

  Is there such a thing as building a model in Illustrator so that the client can change the text to this topic?  A bit like an on a Web site content management system?

  If so, what the customer would be able to use to edit in?  Of course, the customer want little or no fees.

  Thanks in advance!

  Is there such a thing as building a model in Illustrator...

  He did all the time using Illustrator (or most other graphics programs can export to PDF) in combination with Acrobat.

  1. draw the work in Illustrator (or other). All except the text that should be editable by the end user.

  2 export to PDF.

  3. open in Acrobat Pro.

  4. Add text fields.

  5 activate the PDF for Reader Extensions.

  The recipient can now simply open the PDF in Reader, change the text in the fields and save a copy of the PDF file with the changes intact.

  JET

• I can't find the Fox for the custom personas option menu.

  I want to wear my own character customized to my firefox browser, nut, I just can't find the Fox that they speak. Quote:

  "Option 1: Test on your own computer.

  In the Personas menu in the bottom left of the status bar of the browser, you can activate a Persona "offline" on your personal computer by enabling a setting in preferences. In doing so, you can test your Personas before submitting them to the online catalogue.

  Follow these four steps to get the Custom Personas option up and running in your browser:

    1. If you have Personas installed, click on the little fox on the bottom left of your computer screen and click on "Preferences"
    2. Ensure the box "Show Custom Persona in Menu" is checked and close the box.
    3. Click on the little fox again. Mouse over "Custom" in the menu and to the right find and click "Edit"
    4. Build your Persona using the upload fields and additional settings." I can't find the fox. I have tried options and prefrences, but neither work. HELP!
  

  You have the add-on Personas Plus installed? The icon is added by this add-on.

  This add-on adds an icon to the fox for the left side of the status bar, or you can access it using the entrance of Personas on the Tools menu.

• Adding videos to a site. the best way to get the best result (for the customer)

  Hi all

  
  

  Here's a new question, I asked myself.

  
  

  I have to add some videos to the website of the client. Short. About 15-30 MB each.

  So we will not have to wait forever for them to start playing, it is best to:

  
  

  1. Load them all with the rest of the web site in two different formats, so they will play on most of the browsers, then use a video widget in Muse.

  Of course, creating a massive gigantic site.

  
  

  2. Create a channel private on Utube, download all here paste them the youtube ID in a youtube Widget in Muse?

  
  

  3. Another way?

  
  

  Also is there a scrolling effect method so let's say the video is at the bottom of the page and it will only start when through us it.

  Kind regards

  M

  YouTube or Vimeo.

  These 3rd party services are free, they have a fast hosting, they work on all devices and browsers, and the customer can manage/edit video easily.

• Generate the report for the custom period

  I did experiment with Foglight NMS for the past few weeks. I have search in the forums and hunts around the tool, but I've not found a way to generate a report on a custom period. For example, I would like to run a report, see use of bandwidth during opening hours. The only options I see is "last hour", "Last day", "Last week", etc. "." Is this possible? Any help or ideas would be appreciated.

  Hi Michael,

  While we do not have a report which shows the range you're looking for, you can see the use of bandwidth via NetFlow. I know it is not a report, but could be able to show the amount of data sent over the network for a period of time. Lies and must have the feature seen on the road map.

  Mario

• OS 6.0 - Bug in the user interface for the custom control

  Hello

  I discovered a bug of UI on OS 6.0 with one of my UI controls. It seems to be linked to the control itself and how it is the calculation of the width. If my screen is full screen, painted correctly control, but as soon as I change the subLayout of the screen, the control still has a full screen width

  I spent a few hours trying to understand this one... but I can't seem to get their hands on the issue. I am sure that he as to do with the way in which it is the calculation of the width of the control of 99%... If someone could point me in the right direction would be appreciated...

  Thank you

  See the code snippet below

  UITest class

  public class UITest extends MainScreen
  {
    public UITest(long style)
    {
      super(style);
  
      add(new ButtonField("This is my test button", ButtonField.USE_ALL_WIDTH));
      TextBoxField ActionLog = new TextBoxField(0, 75, TextBoxField.USE_ALL_WIDTH);
      HorizontalFieldManager hfm = new HorizontalFieldManager(Manager.USE_ALL_WIDTH);
      hfm.setBorder(BorderFactory.createSimpleBorder(new XYEdges(), Border.STYLE_SOLID));
      hfm.add(ActionLog);
      hfm.add(new ButtonField("This is my test button", ButtonField.USE_ALL_WIDTH));
      add(hfm);
    }
  
    protected void sublayout(int width, int height)
    {
      layoutDelegate(width - 40, height - 40);
      setPositionDelegate(10, 10);
      setExtent(width - 20, Math.min(height - 20, getDelegate().getHeight() + 20));
      setPosition(10, (height - getHeight())/2);
    }
  }
  

  Class TextBoxField

  // http://na.blackberry.com/eng/devjournals/resources/journals/jul_2005/creating_textbox_field.jsp
  public class TextBoxField extends VerticalFieldManager
  {
  
    private static int PADDING = 2;
    private static int DEFAULT_WIDTH = 100;
    private int _managerWidth;
    private int _managerHeight;
    private String _pattern;
    private EditField _editField;
  
    public TextBoxField()
    {
      this(0, 0, Manager.USE_ALL_WIDTH);
    }
  
    public TextBoxField(long style)
    {
      this(0, 0, style);
    }
  
    public TextBoxField(int width, long style)
    {
      this(width, 0, style);
    }
  
    public TextBoxField(int width, int height, long style)
    {
  
      super(Manager.NO_VERTICAL_SCROLL | style);
      _managerWidth = width;
      _managerHeight = height;
  
      VerticalFieldManager vfm = new VerticalFieldManager(Manager.VERTICAL_SCROLL | style);
      _editField = new EditField(style)
      {
        public void paint(Graphics g)
        {
          super.paint(g);
        }
      };
  
      vfm.setPadding(PADDING, PADDING, PADDING, PADDING);
      vfm.add(_editField);
      add(vfm);
    }
  
    public int getPreferredHeight()
    {
      int fontHeight = getFont().getHeight() + (2 * PADDING);
      return (fontHeight > _managerHeight) ? fontHeight : _managerHeight;
    }
  
    public int getPreferredWidth()
    {
      if (_pattern != null)
      {
        return getFont().getAdvance(_pattern);
      }
      else
      {
        if (_managerWidth == 0)
          return DEFAULT_WIDTH;
        else
          return _managerWidth;
      }
    }
  
    public void paint(Graphics g)
    {
      super.paint(g);
  
      // BUG FIX: 17-08-2010
      // Before drawing the border, save the current color, after
      // change the color for the border, paint the border and re-set
      // back to the original color.
      int prevColor = g.getColor();
      g.setColor(Color.BLACK);
      g.drawRect(0, 0, getWidth(), getHeight());
      g.setColor(prevColor);
    }
  
    public void sublayout(int width, int height)
    {
      if (_managerWidth == 0)
        _managerWidth = width;
      else
        _managerWidth = getPreferredWidth();
  
      _managerHeight = getPreferredHeight();
  
      super.sublayout(_managerWidth, _managerHeight);
      setExtent(_managerWidth,_managerHeight);
    }
  
    public String getText()
    {
      return _editField.getText();
    }
  
    public void setText(String text)
    {
      _editField.setText(text);
    }   
  
    public int getTextLength()
    {
      return _editField.getTextLength();
    }
  
    public void setTextWidthPattern(String pattern)
    {
      _pattern = pattern;
    }
  };
  

   

  No, PopupScreen was still available. We have certainly used it in 4.2.1 but it was available before that as well.

  With PopupScreen, create it with your manager custom as a delegate.  In this handler, override sublayout to do most of the work. Sublayout of PopupScreen can contain a single functional element, if you wish: setPosition (x, y) (after the call to super.sublayout). SetExtent of the delegated manager will have an impact on the parent company PopupScreen fine (the screen apply the theme to the Manager and take more room, but it's OK).

• Question regarding setExtent and getPreferredWidth for the custom field

  I am trying to understand the difference between getPreferredWidth and setExtent, which relate to the width of a custom field.

  I create a field that may be greater than the width of the screen. The field is made up of cells (for example columns and lines or cells, such as a table). The cells contain text, shapes, lines, color, etc. When I display the field I only paint the visible columns on the screen and allow the user to use the trackball to accomplish the columns out of the screen.

  At present, getPreferredWidth returns the total width of the field without all the empty columns, is longer than the width of the screen. I use the same value in setExtent for width. GetPreferredWidth must return the size of the field that is painted on the screen - the total width less the width of the columns out of the screen? I have the same question about setExtent - width either in total, longer than the screen width or the width of the part of the field that is painted on the screen?

  If I use the width of what is painted on the screen or the other of these methods, then the width changes when the user scrolls through the field. As the user scrolls, I calculate the number of columns will agree to a width of the screen and paint these columns. Is it a problem to have the PreferredWidth and the setExtent change width? I read that setExtent is called only when the Manager sets this field, so that the changes will not be recognized.

  It seems to work in two ways in a few simple tests, but I was just curious as the value of width that is right.

  Thank you!

  Mark

  When a field has changed in a way that requires the update of the screen (for example, after scrolling offset changes), simply call invalidate() from this area. That will eventually lead to paint (Graphics) for the field. At this point, you return the update field. (If only part of a field - as a single cell - needs to be updated, there invalidate() versions that accept arguments where, for efficiency, you can limit the update for just this part.)

  If I understand your needs, you can achieve the effect desired in the paint method. You can use the current dimensions of the field, the cutting of the graphics area, and your internal roll compensates to decide what to paint and what to delete. Let your custom field leave white space where you decide of doesn't make is not part of a cell. There is no need to change the scope of the field.

  If you go about it by changing the dimensions of the field, and then you ask the system to play much more work he has to do. If the custom field is the only field on the screen, it won't make much difference in the behavior (although there may be performance). With more than one field, it can be weird effects. For example, suppose that your custom field is one of several fields in a HorizontalFieldManager and you change the field width. When the HorizontalFieldManager recalculates its own layout, it will change the horizontal position of the fields to the right. The effect on the user, I think, would be really confusing: as the custom field parade, parties to the right of the screen could bounce left and right as the changed width field. I can't imagine that's what you want.

  Here's another way to think about this: absent some bit of style, your custom field would prefer be exactly wide and high enough to show all without scrolling. So the width and height would be based on adding the appropriate cell widths and heights, regardless of what actually is on the display. (It's also a long time that you do not have something fanciful.) If the optimum height is a function of the width available - as with sheathed on the line of text - you would implement this logic in the layout method. You then have no use for autonomous preferred width and height).