editing registry?

Similar Questions

• iTunes 8.2.1.6 with Vista 64-bit Home Premium edition - registry questions

  I've seen a few different positions on issues of iTunes, but none that match mine, so that's.  I am running Vista Home Premium 64-bit on an HP Pavilion dv4 laptop and trying to install iTunes 8.2.16 (latest version) because I sync it with my iPhone (1st generation, if that matters).

  After erasing completely my computer of all previous installations of iTunes by other threads including uninstalling Quicktime and any program having to do with the configuration/program Panel Apple, empty the recycling bin, restart, remove all the programs apple program (x 86) and all through my computer, restart, pure install iTunes latest version (tried this using Firefox and IE).  When I run iTunes, I have several questions:
  1. I get a message saying that "the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.  This can occur as a result of installing other CD burning software.  Please reinstall iTunes. "I have uninstalled and reinstalled iTunes, a few times.  If I close the window or click on 'ok', iTunes opens, but then there are more questions.
  2 a point iTunes worked my recorder/CD Player no longer works and I had to get a new one from the manufacturer.
  3. I can not download the latest version of the software for my iPhone.  When trying to download or download and install, I get the message, "there was a problem downloading the software for the iPhone"IPhone of Heather".  The network connection timed out. Make sure your network settings are correct and your connection is active network, or try again later. "I tried several times without success, and it is not a problem with my internet as use it for other things before and after/during the download.
  4. once I bought songs from my iPhone, I opened iTunes and click on to search for available downloads - my songs have yet to download on iTunes on my computer.
  5 iTunes crashes
  6. when I run the diagnostic of iTunes, it does not recognize my cd/dvd burner.  I looked for the lower and upper filters and either they were not in the regedit or I deleted them according to other threads Microsoft Vista and then my computer would not restart properly and had to be restarted from a previous restore point.

  I'm at my wits end, you give me all the information I can think possible and just need help :(

  HI - in case anyone else has this problem, I found the solution... it wasn't a problem with iTunes.  Instead, it was a Vista incompatibility problem and protection against viruses.  If you are on Vista 64-bit, a updated driver GEAR Software Inc. for Windows 64-bit (http://www.gearsoftware.com/support/drivers.php) when downloaded and installed fixed the following points:

  1. I get a message saying that "the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.  This can occur as a result of installing other CD burning software.  Please reinstall iTunes. "I have uninstalled and reinstalled iTunes, a few times.  If I close the window or click on 'ok', iTunes opens, but then there are more questions.
  2 a point iTunes worked my recorder/CD Player no longer works and I had to get a new one from the manufacturer.
  4. once I bought songs from my iPhone, I opened iTunes and click on to search for available downloads - my songs have yet to download on iTunes on my computer.
  5 iTunes crashes
  6. when I run the diagnostic of iTunes, it does not recognize my cd/dvd burner.  I looked for the lower and upper filters and either they were not in the regedit or I deleted them according to other threads Microsoft Vista and then my computer would not restart properly and had to be restarted from a previous restore point.

  The other question was treated when I disabled my antivirus (Kaspersky 2009).

  3. I can not download the latest version of the software for my iPhone.  When trying to download or download and install, I get the message, "there was a problem downloading the software for the iPhone"IPhone of Heather".  The network connection timed out. Make sure your network settings are correct and your connection is active network, or try again later. "I tried several times without success, and it is not a problem with my internet as use it for other things before and after/during the download.

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft

• Window vista Home Edition

  Which is the better buy t for Window vista Home Edition registry cleaner

  There are some good ones out there: Auslogics Registry Cleaner (free) http://download.cnet.com/Auslogics-Registry-Cleaner/3000-2094_4-10909814.html?tag=mncol is awesome, I use it all the time.
  Uniblue registry booster 2010 ($30) http://www.liutilities.com/products/registrybooster/ has a better interface than Auslogics.

  NOTE: Auslogics has a backup of registry function, so there is NO RISK to use.
  I hope this helps.

• No audio after installing new graphics card

  I recently installed a Geforce 8800 gt xfx graphics card. After you install the graphics card, I have more audio analogue. My computer does not detect the analog audio devices. Things I've tried: reinstalling the drivers chipset audio activation built into the bios bios reset CMOS reset reinstallation Editing registry. PC specs: http://support.hp.com/us-en/document/c02628226 (Note: all specifications listed are correct except the video card and power supply) voltage is the 450w graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280

  Yes, it is possible, that there is an overload.

  The solution is to get a sound card not cheap, I think.

  One that works with everything what add on slots (PCI/PCIe x 1) you have.

  Then get a Radeon HD6570 (didn't need additional power supply), or some other card Radeon HD if you wish.

• HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

  1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start.

  2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start.

  Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD.

  I tried and does not work:

  -different, another USB port USB cable

  -new installation of 64-bit Win10

  -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall

  -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it]

  Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work.

  Any idea or suggestion?

  OK, here's the solution that works for me:

  YouTube

  In brief

  -check out you the shape of the package files (winrar will be required)

  -HPZstub.exe (NOT run Setup.exe)

  problem solved...

  I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2.

• Background images

  Whenever I have pictures from a digital camera and I want them to be in the background or the part of the background image changing image that they don't resize properly. When I try to change the setting in the customization to stretch or tile, it will show this worked but will not change the image. When I return to check the adjustment it will change back. No idea how to fix this in Windows 7?

  Furhter investigation shows that this isn't just the radio button which will not allow the change. Editing registry thre is a no go, either. Does not save the changes that way or the other.

• Vista - installation of security update error code 646

  installation of updates

  installation of updates

  Hey Louie123456789

   
  Microsoft has provided an automatic fix - it and or edit registry to fix your error on the link below
  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• I can't save all download files or open any exe file, I did remove or what ASSISTANCE

  I have uninstall some programs I've barely used so I'm not if I uninstalled something I need. I can't open files in my local C

  Hello

  1. you receive an error message when trying to save and open the file?

  2. How do you try to download the file?

  3 What place you are trying to save the file?

  4. what web browser do you use?

  It could be a problem with the associated file.

  http://support.Microsoft.com/kb/950505

  EDITING REGISTRY WARNING:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 how to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756  
  

• Error: "cannot open Volume for Direct access" is displayed when Chkdsk runs at startup

  Original title: Edit/Fix key in my registry

  CHKDSK keeps trying to run during startup, but "cannot open volume...". "If I can solve this problem, I want to put it in the manual, not automatic.      My registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rchelp is missing.   Can I remedy this by creating a text file with an REG extension and if so, where can I find the exact measurements to do?  It is the DOS Cmd or in Notepad?

  Hi BarneyBear,

  1 did you allow that chkdsk runs successfully at the start of the system?

  Editing registry is not necessary here. We recommend you to check if the disk check is scheduled.

  This problem can be solved by installing the latest service pack Windows XP.
  See the error message "Impossible open Volume for Direct access" When Chkdsk runs at startup

  See also, Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Log1 file ext

  Windows Vista will not open a file log1 post, he said he must know what file created.

  Any help

  Thank you

  Hello

  The file is the journal of the hive of Windows registry file

  http://www.FileInfo.com/extension/Log1

  With REGEDT32, you can load and edit registry offline databases:

  http://4sysops.com/archives/Regedit-as-offline-registry-editor/

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• Cannot start Windows mail.

  When you click on a link in an incoming e-mail (IE send a reply) I get the message 'Windows Mail could not be started. The application could not open the Windows Mail message store. Your Windows Mail mailbox data are currently used by another program, such as a virus scanner". It is quickly followed by this message "Windows Mail could not be started because MSOE." DLL cannot be initialized. Help - How can I fix this please?

  Incoming messages are in a different email address, not Windows Mail.

  Hi Sandy64,

  ·         Did you the latest changes on the computer?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 2:

  (a) click Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• system shut down options

  When I select close... system doesn't stop... it restarts... Thank you

  always specify the exact Windows version (if it's xp, vista or 7)
  a virus attack can corrupt the registry.
  Try this, open the registry,
  go to run-> Type "regedit" (without the quotes)

  Navigate to the following key and create a name of the value as follows,

  User key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\
  Explorer]
  System key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\
  Explorer]
  Value name: NoClose
  Data type: REG_DWORD (DWORD value)
  Value data: (0 = active stop, 1 = off disabled)

  Here then give data to 0 to allow the judgment.

  If you are not confident to change the registry, then use any third party software.because edit registry repair incorrect in the registry will lead to a serious fault. Be careful when editing at your own risk.

  Thank you!!

• Just in time debugger error

  Whenever I start my computer, I get the following error message, new instance of Microsoft Script Editor tries to run. I check the box and click Yes to use it, but it keeps popping back up. I have to click No two or more times to bring them up to this one. How can I stop this from happening?

  Hello

  1. do you have a version of Visual Studio installed on the machine, for example an express edition may at some point?

  If you have Visual Studio installed, but do not use it, you can uninstall programs and features.

  To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx

  If it is little help, you can also change values in the registry.

  1. open the Start Menu.

  2. in the area of the white line (search), type regedit and press ENTER.

  3. click on continue in the UAC prompt.

  4. in regedit, go to:

  HKEY_CURRENT_USER\Software\Microsoft\Windows Script\Settings\JITDebug

  5. the value of REG_DWORD type must be set to '0' to disable debugging.

  6. close regedit.

  7 logoff and logon or restart the computer to apply the changes

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756