Just in time debugger error
Whenever I start my computer, I get the following error message, new instance of Microsoft Script Editor tries to run. I check the box and click Yes to use it, but it keeps popping back up. I have to click No two or more times to bring them up to this one. How can I stop this from happening?
Hello
1. do you have a version of Visual Studio installed on the machine, for example an express edition may at some point?
If you have Visual Studio installed, but do not use it, you can uninstall programs and features.
To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx
If it is little help, you can also change values in the registry.
1. open the Start Menu.
2. in the area of the white line (search), type regedit and press ENTER.
3. click on continue in the UAC prompt.
4. in regedit, go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows Script\Settings\JITDebug
5. the value of REG_DWORD type must be set to '0' to disable debugging.
6. close regedit.
7 logoff and logon or restart the computer to apply the changes
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756
Tags: Windows
Similar Questions
-
"This exception failed with the following error in the debugger, just-in0time im get an error reading": no installed debugger has just-in-time debugger enabled, then close the windows and restarts when I try to open documents on drive c or when I try to open the files on my external hard drive. MY QUESTION, WHICH I GUESS IS WHERE TO GET A DEBUGGER OR HOW TO FIX THIS ERROR? THANK YOU GUYS
Hi MICHAEL68VR,Follow the suggestion given in the post below to resolve this issue: -
I get just in time debugging error helpp! Please
I get just errors at the time when I try to open a program, I tried to turn off just in time debugger I a file missing in my missing registry file is dbgmanagedebugger.
and I tried to find an answer to microsoft, they said go to the Tools menu and other things but I don't know what they mean by the tools they do explain where he is. answer please if you know how to fix this thanks
Hello
· Are what program you referring?
If the program uses Visual studio, you can post your request in the Sub forum: http://social.msdn.microsoft.com/Forums/en-US/vsdebug/threads
You can also check: http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx
-
Problem of Studio - just-in-time debugger Visual
After starting my windows xp machine, I now get a window that appears, says top tab "Visual Studio Just-in-Time Debugger" indicates the error... The 32 exception unhandled victory occurred (program) [1756] just-in-time debugging this exception failed with the following error: no installed debugger has Just-in-Time debugging active. In Visual Studio, Just-in-Time debugging can be enabled from Tools/Options/Debugging/just-in-time. Search the index of the documentation for more information, just-in-time debugging errors. ...... I deleted the Visual Studio 2008 out of my computer because I was not using it. I can not as up-to-date Microsoft essentials. Anyone else having a problem with that? It is whenever I start my computer.
Thanks in advance,
Diane
Hi deards,.
Try the step below and check if it helps.
(a) open Internet Explorer. Go to tools, Internet Options. Click the Advanced tab and make sure below mentioned options enabled.
· Disable Script debugging (Internet Explorer)
· Disable Script debugging (other)
(b) click on apply and Ok.
-
With the help of Firefox 4 on XP Pro SP3 2000 computer.
See How to: "turn on/off the just-in-time debugging.
- http://msdn.microsoft.com/en-us/library/aa187916.aspx - development tools and languages
- http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx - just-in-time debugging
-
Just in time debugging error opens the box of
original title: just in time debugging error__
I get this error message all the time
An exception 'Runtime error' has occurred in the Script
The 'Just in time debugging' opens...
"Possible Debuggers list."
Only option I have for debuggers is the new instance of Microsoft Script Editor
'you want to debug using the selected debugger' yes or no
If I choose yes I get that 'impossible to crΘer the Application Data folder error message
I don't know what else to try. Most tell me to change the settings of internet explorer but I use Firefox so that it is not very useful to me... Thanks for your help...
Hi xrayjones,You have a version of Visual Studio installed on the machine, for example an express edition may at some point?If you have Visual Studio installed, but do not use it, you can uninstall programs and features.To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspxIf it is little help, you can also change values in the registry.
1. open the Start Menu.
2. in the area of the white line (search), type regedit and press ENTER.3. click on continue in the UAC prompt.4. in regedit, go to:HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows Script\Settings\JITDebug5. the value of REG_DWORD type must be set to '0' to disable debugging.
6. close regedit.7 logoff and logon or restart the computer to apply the changes
EDITING REGISTRY WARNING:Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756
Aziz Nadeem - Microsoft technical support.[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I get the message "just-in-time (JIT) debugging" whenever I have access to the program to my server
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.Data.SyntaxErrorException: Syntax error: operand missing after "ayu" operator.
at System.Data.ExpressionParser.Parse)
to System.Data.DataExpression... ctor (DataTable table, String expression, Type type)
at System.Data.DataTable.Select (String filterExpression)
at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateUser (Object tvParentNode, String Refcompte, String GroupName)
at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
at CGSoftUGMaintenances1.frmUserGroupSecurity.frmUserGroupPermission_Load (Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl)
at System.Windows.Forms.Control.WmShowWindow (Message & m)
at System.Windows.Forms.Control.WndProc (Message & m)
at System.Windows.Forms.Form.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
Code: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
CGSoft_Management_Console
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoft_Management_Console.exe
----------------------------------------
Microsoft.VisualBasic
Assembly version: 10.0.0.0
Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
CGSoftSVComponentServices
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVComponentServices/v4.0_1.0.0.0__bcc94e894d7d6067/CGSoftSVComponentServices.dll
----------------------------------------
CGSoftSVDataServices
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVDataServices/v4.0_1.0.0.0__8b330c8f9a19eee2/CGSoftSVDataServices.dll
----------------------------------------
CGSoftSVCrystalReportServices
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVCrystalReportServices/v4.0_1.0.0.0__2eec9c26545771f4/CGSoftSVCrystalReportServices.dll
----------------------------------------
CGSoftSVUIServices
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVUIServices/v4.0_1.0.0.0__df7cc3d2c28dda8c/CGSoftSVUIServices.dll
----------------------------------------
System.Data
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
CGSoftSVTransactionServices
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVTransactionServices/v4.0_1.0.0.0__9d63caca3e70a9af/CGSoftSVTransactionServices.dll
----------------------------------------
CGSoftSVIntuitiveHelp
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVIntuitiveHelp/v4.0_1.0.0.0__33d3177752e863ae/CGSoftSVIntuitiveHelp.dll
----------------------------------------
System.Xml
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.DirectoryServices
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.DirectoryServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
----------------------------------------
CGSoftAFAccessControl
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///D:/CGSoft/Access/CGSoftAFAccessControl.dll
----------------------------------------
System.Configuration
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Transactions
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
System.Numerics
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Web
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18446 built by: FX451RTMGDR
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
CGSoftUGMaintenances1
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoftUGMaintenances1.DLL
----------------------------------------
CustomMarshalers
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/CustomMarshalers/v4.0_4.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
----------------------------------------JIT debugging *.
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
permit.For example:
When JIT debugging is enabled, an unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
I get the message "just-in-time (JIT) debugging" whenever I start my computer
Original title: salvation when windows starts, there is amessege came I, but it in body provide clarification
Salvation during the windows startup this messege is coming
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.FormatException: The String was not recognized as a valid DateTime.
at System.DateTimeParse.Parse (String s, DateTimeFormatInfo dtfi, DateTimeStyles style)
to libTMachInfo.CMachInfo.GetFirstBootDate (DateTime & dtFirstBoot)
to the SST. TSSForm.ReadSettings)
to the SST. TSSForm.TSSForm_Load (Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl)
at System.Windows.Forms.Control.WmShowWindow (Message & m)
at System.Windows.Forms.Control.WndProc (Message & m)
to the SST. TSSForm.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4206 (VistaSP2GDR.050727 - 4200)
Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
ToshibaServiceStation
Assembly version: 2.0.3378.30769
Win32 version: 2.0.0.5
CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/ToshibaServiceStation.exe
----------------------------------------
System.Windows.Forms
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
PluginLib
Assembly version: 2.0.3378.30753
Win32 version: 2.0.0.1
CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/PluginLib.DLL
----------------------------------------
System.Xml
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
libTMachInfo
Assembly version: 2.0.3378.30753
Win32 version: 2.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/libTMachInfo.DLL
----------------------------------------
System.Configuration
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
y3fsuaxk
Assembly version: 2.0.3378.30753
Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
7zlwwoit
Assembly version: 2.0.3378.30753
Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------JIT debugging *.
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
permit.For example:
When JIT debugging is enabled, an unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.The error is in the Toshiba Service Station program. Try unininstalling and download the latest version
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/download.jsp?CT=DL&soID=2460122&ref=EV
Or just uninstall it if you do not need.
Or uninstall and get email update notifications by registering via this Web page.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=communicate&SN=false
-
get a debug just-int-time message
get a just-in-time debugging message that says 'new instance of Microsoft Script Editor. You want to debug using the selected debugger? "This box just keeps popping up.
Control Panel > Internet Options > advanced. Check "Disable Script debugging (Internet Explorer)" and "disable (other) Script debugging." Apply/OK outside.
If that doesn't take care of the issue, in the debugger itself:
1. use the Tools menu, and then click Options.
2. in the Options dialog box, select the Debugging folder.
3. in the file debug, select just-in-time page.
4. in the "enable just-in-time debug these code types" box, clear the check boxes next to Managed, native, and Script *. Click OK.* On a client computer with this problem, I was not able to delete any of these items (can't remember which), but other areas of compensation took care of the issue. MS - MVP - Elephant Boy computers - don't panic!
-
I get an error message on my screen every five minutes. It says 'a runtime exception error has occurred in the Script' he also said possible debuggers - new instance of Editor Microsoft Scrpt. whichever option I choose the message reappears constantly. any help?
Hi andrew-wolfman-wyrsta,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. you have Visual Studio is installed on the computer?
See the link below and try the steps to change the registry entry at disableJust in time debugging on the computer.
The just-in-time debugging can always be activated even if Visual Studio is no longer installed on your computer. When Visual Studio is not installed, you cannot disable debugging from the Options of Visual Studio Just-In-Time dialog box. In this case, you can disable debugging by editing the Windows registry just-in-time.
To disable the debugging by editing the registry just-in-time
http://msdn.Microsoft.com/en-us/library/5hs4b7a6.aspx
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello
I get an error of delay in my exe file but its not working in laptop but its does not work in desktop basically I m do mannully x and axis are using servo motor control first meters in mannully and I'll store data and after I'll are automatically at the time where I get error of wait time at the office. In the same office before it was working now its time-out error is. Please tell me the solution. actully I change office in this office than m... timeout error please tell me the solution.
Thank you.
Hi, I had the answer... I solved the problem of my problem, I have already mentioned above (in his work at the office laptop its does not work) Finally I solved the problem is (I use delta servo motor control, I was using the communication cable connection is not based) in connection only. Finally I gave the connection now its fantastic work...
Thank you for your review of precious...
-
PCIe-1429 randome time-out errors
I use a card National Instruments PCIe - 1429 Camera Link which gives timeout errors about 20% of the time every time that the show clock is stopped and restarted.
The problem I see occurs for a 1-tap 16-bit and 8-bit 8 - tap camera configuration. Every time the camera changes modes show link camera clock is momentarily interrupted, and PCIe-1429 is unable to acquire an image of 20% of the time.
In Measurement & Automation Explorer, it returns the error: "a timeout error has occurred while you wait for the specified event. If you expect a picture, make sure all the video data is acquired during the period. If you wait for a signal, check that the assertion of signal occurs within the period.
Now, I know that my timing is correct because if I simply stop the clock to show again the PCIe-1429 will begin to acquire images. He was to acquire and then always correctly the images until the next time the clock of transmission is interrupted. It is on a probability of 20% of a timeout error if the clock of transmission is interrupted. It behaves like the phase PCIe-1429 liaison camera receiver locking loop has re-synchronization problems.
Our camera (an intern built Kodak) uses the National Semiconductor DS90CR287 channel link transmitter. When the PCIe-1429 gives a timeout error, I check the clock of transmission DS90CR287 on an oscilloscope and it looks always good.
Is this a known issue with the PCIe-1429 or a known sender of DS90CR287 problem?
Apparently, there is a bug in the DS90CR287 channel link serializer. The phase lock loop, sometimes fails to produce a clock output series of acquisition card and the operating cycle if the input clocks are interrupted. A phase lock loop should be able to recover from that. We noticed that National Semiconductor changed their sheets to require power cycling the DS90CR287 after all of the input clocks are interrupted. We have implemented the procedure of power cycle and time-out errors now appear to have stopped.
All fixed!
-
Expert area a upd just my time of 3 months audit can help anyone?
Expert area a upd just my time of 3 months audit just after ive got rid of my play slip, it is unacceptable that I can't access my rewards for another month now, can anyone help?
Hello
You should directly contact ExpertZone as answers has no method to provide direct assistance.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
What window updated each time showing error code 00000646 nearly a month what is the solution
What window updated each time showing error code 00000646 nearly a month what is the solution
Thank you
msiddique
Gives it a try and see if it solves the problem.... http://support.Microsoft.com/kb/2258121
Let us know if this helped
-
just in time debugging problem in visual stidio
a problem with visual studio just in time to listening to guard that happens and it ends everytimg I do
Hello
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:
Maybe you are looking for
-
My Windows Hotmail doesn't showan attachment when I write an e-mail.
When I go to Hotmail from Firefox, I can't attach anything my email because the site does not show the attachment line. However, when I go on Safari, the line of weed is on my Hotmail emails. Help!
-
Impossible to find good WLAN for Satellite P300 (PSPCCE) installation
I installed Win XP on my laptop and do everything except for the WLAN card. When I search all drivers I get 3 drivers WLAN, and I tried them all without a bit of luck. In my equipment Manager (xp), I can see an unidentified network card, and on vista
-
With the help of Windows 8.1. How can I delete a print job in the print queue has hung up?
I have a print job that has been delete forever and will not respond. He is suspended and cannot allow anything else to be printed. How can I remove this. I have windows 8.1.
-
REony Vaio model VPCEG1BFX Do I need Vaio Messenger? Sony says that "If you uninstall VAIO Messenger and the associated service, you won't able to receive critical messages from Sony on your computer." They also specify if extended service warranties
-
Windows xp sp3 does not start after the failure of windows update and restart.
Hello My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and