Editing the text in the scanned document (ROC)

Similar Questions

• How can I change the text of the scanned Documents?

  Original title: painting with text edition +.

  I want to scan a document and edit the scanned text of the document y at - it a free software + download for this if yes what is the download and site

  Hello

  I suggest you to see link below and check if it helps.

  http://Office.Microsoft.com/en-us/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  In addition, you can download any third-party software that helps to edit scanned documents.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope that helps!

  In addition, for more help on Microsoft Office Document Imaging, you can contact Microsoft Office Forums.

  http://www.msofficeforums.com/

• Cannot open the scanned document

  I use an officejet 8600 +.  I can't open the documents that have been scanned in PDF format.

  Hello

  Each of them or just one or two? Please scan 1 page (for test) computer and select document , and then open the scanned document.  You may need to update Adobe reader as mentioned on the following assistance:

  http://helpx.Adobe.com/Acrobat/KB/cant-open-PDF.html

  Kind regards.

• LaserJet M5035 MFP: I have a purple line which appears in the scanned document

  Hello

  When sending e-mail through the printer scanner, I have a purple line which appears in the scanned document. Scanning is done from the "feeder ' ' the printer and not the glass.

  The windows were all cleaned.

  I did the test and digital printing of the "feeder ' ' and I have no lines for printing!   I did update the firmware of the printer and I still have the same result.

  You have a solution to this problem?

  Thank you

  

  The small windows of the charger scanner had a small red above mark.  When the analysis has been done and sent on an e-mail, the line shows as it is scanned were made with the color scan option.  If I print the line doesn't show because the printer is not color!

• cannot send the scanned document

  I get a message telling me to check my e-mail program after the scanner refuses to send the scanned document

  It takes really copy and paste the full error here to all possible assistance.

  You can always scan the document on your HARD drive, in My Documents for example and then attach it to an e-mail.

• OfficeJet 4650: Biased Image of the scanned document

  During the analysis of the image produced by the scan my documents is biased on the new page... a little as the document I wanted to analyze somehow go slightly twisted during the scanning process.   Y at - it a setting or fix I can do to help my scanned images is more aligned on the page?

  Hi @TalusHiker,

  Welcome to the HP Support forum.

  I understand that you use a printer all-in-one HP OfficeJet 4650 with a Windows Vista computer and analysis the scanned document is slightly asymmetrical. I would like to help with that.

  In order for me to propose a proper resolution, it can help to collect a little more information from you.

  You scan the automatic feeder (ADF) of Document, or the glass dish?

  The scan seem asymmetrical when you look at it on your computer, or when it is printed?

  Is the pages in a separate document or part of a book?

  I'll watch for your reply, so I can go into it for you. Just reply to your convenience.

  Thank you.

• I want to be able to edit the scans. What products suit my needs?

  @@@

  Hi rayv11981568,

  You will need Acrobat free trial download Adobe Acrobat application | Acrobat Pro DC to edit the scanned PDF files Edit scanned PDF, Adobe Acrobat DC format.

  Kind regards
  Nicos

• Help Acrobat edit text in the scanned document

  I have a scanned document I created a PDF file with.  Now, I want to delete some of the text in the row without moving or distu
  rbing text that surrounds it.  Is this possible?
  Help, please

  Bill@VT wrote:

  You must use one of the graphical tools to conceal what you don't want. You must then use the redax tool to remove hidden - or at least that's my understanding of what you would do.

  In fact, you would use the tool 'mark for the redaction' to highlight text or draw rectangles around the areas you want to write. You then click on 'apply the redaction. You can then greeted by a dialog box asking if you want to get rid of some back end information related to what you been expunged (as metadata, attachments, bookmarks, etc).

  It is very complete if you want to probably run ion one copy of a file until you get the hang of it.

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• Change the path of the file of the scanned Document

  Hi, can someone do that to me. I have a HP Deskjet 2515 all-in-one printer, I was wondering how to change the location of the file of the scanned photos or documents. Whenever I scanned a document, it was recorded on the forlder of my documents in the library. Please help me how this issue can be resolved.

  Hello

  To change the path of digital file, please see below.

  Open the wizard from HP printer > under Print, scan & Fax > scan a Photo or a Doc > advanced settings > Destination > under save location you select path

• find the file of the scanned document

  I scanned a document using a Dell V305 printer/scanner to computer Dell 540 s, so I tried to save in a Word document. My version of Office is Windows 2007. I can't locate the file.

  It will be where you said the digitization program to save it in time you did the scan.

• Save the scan document to Microsoft Word

  I can't change the settings of Microsoft Scan to allow saving a document as a Word. doc. Any help would be greatly appreciated.

  Hello rcohan6168,

  As your question relates to Microsoft Word, you will get a much better response if you posted the question Word Forum: http://answers.microsoft.com/en-us/office/forum/word?tab=Threads

  As far as I know a scanned document is automatically saved as a .bmp or jpeg. This is because the ' scan ' is in fact a photograph of this document after scanned by your scanner. I could be wrong, but I don't think that you can actually save the document as a .doc file - well not unless you actually cut and copy the .bmp/jpeg file into a word document, and then save.

  However, the above is only my thoughts. Try posting the question in the forum of Word and see if someone else can give you more information.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to highlight the text in the scanned document

  How can I highlight text in PDF files, I've scanned... My HP scanner uses Adobe Acrobat Reader DC... Thank you

  Doriana. This is a scan. The highlight of the text tool will not work.

• Cannot save the file of the scanned document

  DeskJet F380, Windows 7 64-bit

  Although "I had been able to digitize, manipulate & save my document on file, this feature currently does not work. I tried to download & reinstall the software & drivers & even updates related to this issue. When I try to install the update I get the following message: "this update does not support HP devices you have on your PC. "You don't need this software update.

  Hello

  Please specify.

  Please check the ppp settings configured by the operating system, such as the HP software does support 100% DPI:

  1. Right-click on an empty area of your desktop and click on personalize. 
  2. To the lower left corner, click on the link of the display. 
  3. In the left pane, click Custom text size (DPI). 
  4. Make sure that the DPI value is set to 100%
  5. Restart your computer and try to scan the image.

  Please let me know of any changes, or the value is already positioned 100%

  Shlomi

• Windows 8 scan poblem, cannot work on the scanned document

  When I scan a document into my computer I can't make any changes to it.

  If you have the full Adobe Acrobat version not only the drive, you can use it to edit PDF files. However, there are other PDF editors out there.