Editor in the file blackberry - tablet.xml AND size of the icons

Similar Questions

• No style sheet instructions incorporated for file blackberry - tablet.xml

  Good day everyone. I get this error when I try to run my application from Flash Builder.

  No style sheet instructions incorporated for the file: bllackberry - tablet.xml

  I created the project in Flash Builder 4.5. I have updated to 4.5.1 and seen this error so I recreated the project but still get this error. My blackberry - tablet.xml is below.

  None

  fake

  Me

  Splash.PNG

  Icon.PNG

  access_shared

  I had to add:

  http://ns.Adobe.com/air/application/2.7">

  ...

• The new blackberry - tablet.xml

  Hi all

  I heard with OS 2 and BB 10 soon, blackberry - tablet.xml is now changed to something else.

  So I wanted to know, I can keep blackberry - tablet.xml and add the new also the same extent of file or which may cause a problem with the operating system when it detects 2 files?

  Same format, just rename to blackberry - tablet.xml bar - descriptor.xml

• BlackBerry - tablet.xml structure

  Is the structure for blackberry - tablet.xml documented somewhere? I thought that's where I should look in if I want to change the default value to the loading screen. Hope someone can shed some light on this.

  Hey ryan,

  You cannot change the appearance of page in any case load yet. his will appear for each load. How ever what you are referring to is the blackberry - tablet.xml and there you can change which category your application icon appears in. here is the link to the page of information about the XML document:

  http://docs.BlackBerry.com/en/developers/deliverables/21877/Add_icon_to_configuration_file_1374808_1...

  This is the structure of the document blackberry - tablet.xml:

  
    
      none
      true
    
    Sample Inc.
    core.internet
    
      your_image.png
    
  
  

  Good luck!

• < category > does not work in blackberry - tablet.xml

  In the playbook Simulator, my application is displayed in the category 'all' applications, even if I am in blackberry - tablet.xml, it's category has utility value.  Adding an icon and all other parameters in xml file work again.  Here's what's in my file to blackberry - tablet.xml:

  
    
      none
      false
    
    Sample Inc.
    core.utilities
    
      quadraticIcon.png
    
  
  

  What I am doing wrong?

  Maybe it doesn't work because there is no "core.utilities".  Try "core.utils", as stated in a message by taylortbb

• Make background Transparent on AIR Flash CS5 for BlackBerry Tablet Simulator Application

  Hello

  I tried to find a way make the background Transparent on the Flash CS5 for BlackBerry Tablet Simulator AIR Application and I think it has to do with my *-app.xml file.  I saw another forum mention adding the tag and the parameter 'true '.  I put it inside my tags and my .bar file would not always compile using the command line package.  As soon as I remove the label of , I can compile the .bar file and view it in the simulator of the tablet.  Does anyone have advice?

  You must assign the value true in the file of your blackberry - tablet.xml, no not your - app.xml file.

• Still problems with the icon

  Hey guys,.

  My application got rejected for the second time because of the icon does not appear. I don't know what I'm doing wrong. Can anyone help?

  My icon was not 86 x 86 for v1.0.0. So, I presented a v1.0.1 with a size 86 x 86 icon (I've also attached this icon with this post).

  Looks like my blackberry - tablet.xml:

  Do not rename, there just need to be placed in the file of blackberry - tablet.xml.

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• synchronization between the editor in the browser and file failing muse

  In the past I had problems with changes in the browser to a client site hosted on Business Catalyst not successfully implemented Muse who have never explained Re: Muse is not merge changes

  Last week, I got a trouble with this same site (opbarks.com) and have a frustrated customer, angry as a result. Restore things, here's what happened:

  Last week, when I open my file of Muse, I sometimes got a notice stating that the site had changed through the editor in the browser, and I agree to incorporate changes. However instead of the request for review and merge the changes, the window has very quickly to full synchronization screen.

  

  I thought that maybe site changes had been made and then cancelled or returned back to match what I already had so so no change despite the alert - or that Muse was just confused. So I continued to work on the site and published some tests I did with Wufoo forms. Unbeknownst to me, I had crushed my client did to two of its significant changes classes pages. Annex OpBarks Sweet Spot cottages Quakertown   and OpBarks calendar Little White Dog East Falls

  Before you crush me, my client had used in the browser edition to publish information for may and June classes. Because my Muse file has not been updated (because no changes were to merge), I published the outdated class dates and descriptions on my customer changes. First noticed my client (because one of his customers asked when she could run classes), she thought that maybe amended no had not stuck because she forgot to hit publish them in the browser - then blamed editor itself. While she paid his assistant to redo the changes and they both checked the site online to ensure that may and June were posted. They have been. They don't have to tell me about it and it wasn't until they looked back a day later and seen their changes went even once they contacted me to help solve. Turns out that the dates of their endangered changes coincided with the time Muse told me the site changed, but had then no changes to show me and I had published it. Beyond technical frustration and overtime costs, my company customers was hit - registration was non-existent because customers could see only old and outdated classes.

  
  

  Temporary workaround: now that we have understood what the problem was (bad timing), my client is pay me to make any changes directly in the Muse and publsih until we can trust the synchronization again. Of course, we could continue to use the editor in the browser and if I get a alert Muse change, but no change to merge I will not post and he will ask my client if she has made changes. But it does not solve much - I have no way to get my Muse folder to update without doing manually what is already done in the browser.

  
  

  I'm looking for an explanation or if it is a bug, I would like assurance that she is treated and want to know when I can sync trust to accomplish his task again.

  
  

  In case it helps to solve the problems, I am totally up-to-date on Muse software and faithfully were rename files .muse publishes in the browser do the merge (a solution that I read on a forum somewhere). I don't know what else to try. This is a link to the muse file that do not correctly accept the changes in the browser. Dropbox - opbarks_Apr22 - 2015.muse and it's a current a Dropbox - opbarks_Apr29-2015-for - AdobeHelp.muse I can not always going to work. (more on that below)

  
  

  ------
  

  
  

  Re: Dropbox - opbarks_Apr29-2015-for - AdobeHelp.muse to make it worse, I did a test see if I could reproduce the error. Successfully, I got a change in the browser, I did to the homepage of bend in my file of Muse. BUT I can't get a small change, I did to OpBarks annex Sweet Spot Farm Quakertown able to trigger an alert in Muse that an amendment was filed and manually using file > synchronize with the web version displays a window that says no changes detected.

  
  

  
  

  It's small change I made to the editor in the browser. Add a hyphen and has published.

  

  
  

  My Muse file may not see the change.

  

  
  

  He has given some time and closed my file of Muse, reopened and I always get a message "no changes detected.
  

  

  Yet once again, I would like your help to understand this.

  
  

  Thank you

  Janine
  

  Hi Janine.

  There are a handful of circumstances that may prevent the Muse of the merger successfully completed through editing in the browser changes. One of them is the invalid HTML markup on your page.

  This seems to be the case with OpBarks annex Sweet Spot Farm Quakertown

  Specifically, the HTML for the form at the bottom of the page is not valid. Do you remember how you got/integrated HTML?

  Thank you

  Abhishek

• If I put a restriction of password which only allow customers who purchase print it (no copy or modification of the document) have an impact on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  If I put a restriction of password that only allow users who buy to print it (no copies or the modification of the document allowed)-it will have no effect on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  Some mobile devices won't be able to open it at all, but if it is open, the quality is not affected.  Please note and understand the warning you get when you set security: indeed, it is largely ignored by many apps.

• Homepage files blackBerry Smartphones (and icons inside) missing and the content of the inaccessible files

  Hi all!

  8820 version 4.5 (AT & T Service)

  My home page consisted of 5 files where I organized all of my programs, as well as the question of requests at the bottom.

  Unexpectedly a few days ago records disappeared (as well as all the icons for the programs that were in folders) and all that's left is a light overview of origins shaped rectangular on the left side of the screen that are stacked on each other.  And the question of the application at bottom also has all the icons in to access programs.

  So now, for example, I can not find and open my program of contacts.  But, I know that the information is still there because I can use the voice dialing function to call the numbers that I don't know.

  The only icons, I can access to get to the programs is through the 'toggle' (alt and esc) functionality.  Here I have the PTT, messages, bbmesenger, home, phone and icons of browser I can access.

  I bought the phone the end of last year and just put update to v 4.5 a few weeks ago.

  What suggestions anyone would the best method to solve this problem?

  Thanks in advance.

  Moutari

  I don't have it in fromt of me at the moment, but through the Application Loader, there should be an option button or advanced you can hit. In this screen, you can select the option to erase all applications or something like that. Do erase all the device and reinstall the OS. Let me know if you see this option.

• Location of the icon library XML file?

  My installed version of LabVIEW 2015, full, SP1, does not glyphs/icons available, so I am trying to download the required files.  I downloaded the zip file with success, but when I try to download the XML file, the link takes me to a page containing the raw code.  When I copy, paste and save this code in an XML file, I get an error when I try to sync manually.  Automatic synchronization will fail also.

  Here's the location of the xml file that does not work after being cut and pasted: http://www.ni.com/swf/iconlib/icons_filtered.xml

  Anyone know where I can find an XML file that will work?

  Of course, if there is a better way to get my glyphs work, let me know.

  Thank you.

  So a number of things might happen.  This computer has multiple users?  Glyphs are installed for the user who installed LabVIEW, but nobody else.  If you don't like this design, you should go vote for this idea.

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/shared-icon-editor-glyphs-directory/Idi-p/3253351

  With respect to the glyph broken, updated tool, I have no idea.  The stupid thing just never worked for me.  OR even a standalone program once for the update of glyphs and it doesn't seem to work or else the other.  To help with this, I have attached my glyphs and you can simply copy and past in your \LabVIEW Data\Glphys folder.  In addition to those that come with LabVIEW 2015 I also added a Hooovahh folder with many a library open icons and a few I did.  After copying restart them LabVIEW and open the icon editor, then wait a few seconds while it lists the directory of icons.

  Given the time, I bet that someone could make a tool that synchronizes correctly, download and install the icons correctly, especially since I think that most of the icon editor is open source.

• XML and the data recovery

  Hey,.

  Not sure if this is the right section on the forum:

  I was wondering if there was a way to retrieve data from an XML page.

  For example, I want to create a BBApp that can request a XML page and once it has loaded to extract all of the appropriate fields and load them into a graphical user interface - without actually loading the page, basically I just want to create demand and get the XML Source Code and mine through this XML Source data.

  Thanks in advance,

  Jovinus Sveinbjornsson

  Hi Eva,

  This can easily be done in a BlackBerry Widget.  You will use the built in support of AJAX and the XMLHttpRequest object.

  You can retrieve the contents of the XML file via an AJAX call.  When it returns can then access the property of '.responseXML' which has already crawled your XML DOM document.  Just to make sure to whitelist the domain in the config.xml file to allow access to that external resource.  There are a bunch of samples and videos that explain this concept.

  You would then just browse XML and create your HTML code to reflect your data and insert it into the page.  A good tutorial on AJAX can be found here:

  http://www.w3schools.com/AJAX/default.asp

  Now for some advice

  If you are recovering data and then display as Web content within a widget, I would really recommend format of that content on the server in its HTML markup before sending it to your Widget in the AJAX request.  The reason why I recommend this is that there is a lot of manipulation of the DOM creating HTML nodes if you look at the raw XML data that is returned.

  If you flip it over already in HTML server-side, you can simply replace an item on your web page using innerHTML.  On a device mobile, if you can offload the work to a server it certainly helps performance.

• Tried to reinstall XP on my laptop after installation of windows 7 and xp disks had missing files: cmnicfg.xml, ipcfgxml, osinfo.xml, potscfg.xml and pppcfg.xml. What should I do now?

  I installed Windows 7 on my laptop and it terribly slow. I used the XP disc and tried to reinstall it. Came in halfway through the messages that he was missing the following files: cmnicfg.xm, ipcfg.xml, osinfo.xml, potscfg.xml and pppcfg.xml. Now, it does nothing. Help!

  Hi SharonPittman,

  (a) you suggest to clean the Windows XP installation CD with a piece of cloth & then try to install windows XP.

  For more information, see these links.

  How to install or upgrade to Windows XP

  Reference: Install, reinstall, or uninstall Windows

  (b) if the problem persists, there is possibility that the Windows XP CD is damaged.

  I recommend buying a Microsoft Store installation disc.

  You can contact Microsoft Store at the link given below.

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.37286600

  Hope the helps of information.
  Please post back and we do know.

• No matter what file/program I open and work will appear later in the trash & Windows create a lot of restore points.

  Original title: Windows XP: recycle bin and estore points.

  After the last formatting the computer and installation of Windows XP:
  (1) any file/program I opened and work with / appears later in the trash even if I did not remove it. The file or the program remains in its original folder and nothing happens to her, I can work with him when I want.
  (2) Windows creates so many "restore points" that once a month I have to delete "all except the last" in order to have my program anti-virus (PC-Tools) are working properly.  Is there a cure for this?
  Thanks in advance,
  Yael

  You did the right thing by turning SR off on your external drive.  See http://bertk.mvps.org/html/tips.html#11

  There is no need to have the system restore check a partition which contains only data files.  Http://bertk.mvps.org/html/description.html (this is emphasis added)

  About the system restore

  • System Restore monitors changes to the system and saves the State of the system as a restore point. If a system problem occurs following a change of system, the user can return the system to a previous state by using a restore point data.
    Applications and the system can create restore points when changes made to the system occur. System Restore also creates checkpoints every 24 hours of absolute time. In addition, users can create manual restore at all time points.
  • System Restore does not restore user data or documents, so it will not cause users to lose their files, email, browsing history or Favorites. System Restore is also provided to users in safe mode, making it easier for them to reclaim their computers before that happens the problems. Note: a system of Safe Mode or restore the command prompt a cancellation restore point will NOT created!

  The monitoring system

  • System Restore monitors and restores a set of file system and application, the States of these files before the change of the archiving system. System Restore also records a snapshot of the registry (Note: some current registry values will persist) and some dynamic system files. When the System Restore detects that the user is not actively using the computer, (idle time) he compresses the registry and copies of any file made.
  • System Restore requires a minimum of 200 MB of free disk space on the system drive during the installation. When the amount of falls of free space on the disc below 50 MB on ANY monitored drive, System Restore goes into sleep mode and continues to create restore points. All restore points are deleted at that time. System Restore reactivates and resumes create restore points from 200 MB of free disk space on the system drive.
  • Files that are monitored or excluded from the monitoring are specified in the file % windir%\system32\restore\Filelist.xml. For more information, see Monitoring of file Extensions.