effect of change of intellectual property on the database or weblogic or merger.

Similar Questions

• changing the database in weblogic server port

  Hello
  Please help to achieve the following objectives...
  I want to change the database in weblogic port so that weblogic listen port number has changed.
  Please help me to achieve this goal.
  
  Thanks in advance

  Hello

  Go to the WLS console in Data Sources and change the URL of your data source connection pool...

  I hope this helps...

  See you soon,.
  Vlad

• How to change the database of weblogic IP/Hostname?

  Our current development middleware stack contains:

  WebLogic, WebCenter, WebTier, and OAM all pointing to the same repository of db oracle via an IP address (because of host name resolution problems.)  Unfortunately the database server's IP has changed and I cannot start the weblogic administration console to change the IP address of the database.

  «"" "Guide to Oracle: http://docs.oracle.com/cd/E12839_01/core.1111/e10105/host.htm#CHDBBIAH »»»"

  Excerpt:

  Task 5 changing the system Data Source

  If you use the IP address in the data source definition, modify the system data source to use the new IP address for the metadata repository. To do this, you use the Oracle WebLogic Server Administration Console:

  Extract to start the WebLogic administration Console:

  < 27 August 2013 21:52:03 CEST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool "SDM-CustomPortalDS": IO error: the network adapter could not establish the connection. >

  For this particular case, we can simply reinstall the entire stack but would prefer a clean resolution.

  There seems to be two issues here. The console is just a request, so I'll assume

  what you mean is that the Server WebLogic himself primer not, probably because some

  essential service depends on your data source, your data source cannot deploy, and this is the config insists

  on an initial capability greater than zero...

  Then, go to your config/jdbc directory, subdirectory of the main domain and for each data source

  you have, there will be an .xml file. Edit each file that represents a data source for the affected

  DBMS and change the URL of a given driver, to have the good, DBMS new machine name/IP address.

  Then try to restart WebLogic and see if you're OK...

• Find and change a single record in the database

  I create a few forms that access an Access database that will be used to enter data into the database.  I am able to open the database files and scroll through records one at a time and have added features to be able to search and display a single record.  The problem I'm having is when I load a single record and then modify that file, I can't save the changes to the record, in other words, the record is not updated on the database.

  I can add new records and modify records as long as I scroll to them using the. next(),. last(),. first() and. previous() orders; However, when I insert a single record I can't figure out how to save the changes made to that record in the database.

  Here it is:

  xfa.sourceSet.DataConnection.open ();

  xfa.sourceSet.DataConnection.first ();

  var oDataConnList = xfa.sourceSet.DataConnection.nodes

  var oDataConnList.length = nCount;

  for (var i = 0; i)< ncount;="">

  If (CurrentRecord.rawValue! = SearchField.rawValue) {}

  xfa.sourceSet.DataConnection.next ();

  }

  }

  This establishes the data connection, made sure that it starts on the first record, counts the number of files and of volutes each record until he finds the one the user sought!

• L2L ASA change of intellectual property

  A two site ASA, matching a Site VPN deployment to set up and works, we have to change supplier at one end.  This change will require a change to the IP address of peers from one end.  We can simply change the ip address of the tunnel or do we have to regenerate the entire configuration?

  Hello

  You can follow the steps below.

  Add the new group of tunnel for the new address

  asa1(config)# tunnel-group 4.4.4.4 type ipsec-l2lasa1(config)# tunnel-group 4.4.4.4 general-attributesasa1(config-tunnel-general)# tunnel-group 4.4.4.4 ipsec-attributesasa1(config-tunnel-ipsec)#  ikev1 pre-shared-key C1sc0123
  
  !
  
  
  asa1(config)# no crypto map Outside_map 1 set peer 2.2.2.2 WARNING: The crypto map entry will be incomplete!asa1(config)# crypto map Outside_map 1 set peer 4.4.4.4 asa1(config)# show run crypto | include peercrypto map Outside_map 1 set peer 4.4.4.4 
  
  !
  clear configure tunnel-group 2.2.2.2
  !What about Kiss		   

• Protect against changes in intellectual property on guest VM

  We have several ESXi hosts, running some VM guests, for the most part, 2003 Server and Linux.

  Our customers get full root/administrator access to their VM.

  How can I protect my clients network, change the IP addresses of their servers?

  (Use the Protocol DHCP is not a solution because it prevents them from making a change)

  What do you suggest me?

  Maybe you need a different design?

  Maybe if you isolated within their own virtual local area network clients and is 1-to-1 mappings to public IP address on a firewall. The only impact of change them their IP address, is that they would violate their service, not another.

• What effect resize file temp on primary does the database pending?

  We have a weekly work on primary that resizes the temp tablespace.
  STANDBY_FILE_MANAGEMENT = 'AUTO' so am I correct in the assumption that the changes will be transmitted and replicated standby, even if they are temporary files?
  I'll live with DG in 2 weeks and continues to think about questions like this!
  Thank you

  Written to tempfiles are not connected, so are not shipped to the standby database. Entries in the temporary file on the primary causing the tempfile wish do not cause the tempfile on the eve of extend. TempFiles on standby can be added/removed/resized independently in primary, even with STANDBY_FILE_MANAGEMENT = 'AUTO '.

  If the watch is purely for the recovery and remains permanently in managed recovery mode, then the day before will not even need a temporary file until after it has been activated in a situation of switching/switching.

• Add hosts to the new regime of intellectual property

  We have recently moved offices and changed our intellectual property system, and now I can not add the host to Vcenter.  I can get to all the consoles of service, but when I go to the VI client and watch all host all VMs appear as disconnected.  The same goes for the host is Tjhe.  I tried to remove one at a time and to add them but get an error message...

  Add a host

  LUTZCPA

  A host with powered or suspended virtual

  machines cannot enter an enhanced VMotion

  Compatibility cluster that is configured for a

  Lower function CPU reference host.

  LUTZCPA\super6

  vCenter. LUTZCPA.COM

  05/06/2010 09:07:49

  05/06/2010 09:07:49

  05/06/2010 09:07:50

  What should I remove every army until I have re - add the? any help is appreciated.  Thank you

  Looks like you have set too low level CVS

  ---

  VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4

  http://blog.vadmin.ru

• Image rejected because refusal of intellectual property

  Hello

  So, I submitted this image and dismissed due to the refusal of intellectual property

  Painted Ladies by astroprojector - Photo 93593623 / 500px

  However, in similar image search, I found there are a lot of images more like my who were accepted. Click on this link.

  Pictures free rights, photos, and graphics. Adobe Stock

  There is no explanation about what intellectual property is the problem and why the other images have been accepted? These images are correct release property, or images just arbitrarily approved or rejected?

  Thanks for your patience so I checked on that. The picture you posted of painted ladies it turned was acceptable to use and has been put online by the moderation team.

  The two examples you have posted most recently are impressive pictures. We cannot sell them for commercial use, with the prominent Union Bank logo on the building however. I recommend out clone as well as all the other logos you can see in the image and submit it again for a second review.

  Kind regards

  Mat Hayward

• Validation of intellectual property question

  Hello
  
  Referring to the Sub statement of the OAS best practices guide
  
  Oracle® Application Server Best Practices Guide
  10g (10.1.4.0.1)
  B31762-02 part number
  
  http://download-West.Oracle.com/docs/CD/B28196_01/core.1014/b31762/accessmgr.htm#CJGDJCIG
  
  
  Chapter: 2.2.1 using the Validation of IP, HTTPS and secure Cookies in order to mitigate the risk of an attack of Cookie response
  
  "Oracle recommends that you always enable validation by IP limit the risk of a response cookie.
  attack. If exceptions are necessary, for example, when you deploy by using a reverse proxy topology,
  to ensure that only allowed IP addresses are included in the list of exceptions. Avoid
  always turn off IP validation. »
  
  We turned off IP validation on all of our Web servers for 2 reason below:
  
  1. we do authentication on a different server (URL redirection in the authentication scheme)
  2. We also do authentication on the IIS server and weblogic server.
  
  Question:
  (1) to activate this IP Validation on 'ON', add the IP address of all the location where the cookie is created or updated?
  
  (2) if that's the case, then that includes all the Web server host, the IIS server that create the obssocookie?
  
  Appreciate the comments.

  It is difficult to answer without knowing your topology.

  If you think about it this way, it should help you answer your own question:

  The IP validation is the process of comparing the IP address of the client with the value of the intellectual property in the ObSSOCookie. The value of the cookie is the IP address of the HTTP client when authenticating.

  Validation of off means IP - regardless of the IP address from where a connection to an HTTP server protected WebGate originates, no comparison of the value of intellectual property to the IP in the ObSSOCookie will happen.

  The IP validation on means - the client IP will always be compared to the value of the cookie. If they are not the same, it is assumed that the cookie is reproduced by an invalid client and session (cookie) is not valid.

  IP Validation on way to exceptions: Do IP Validation EXCEPT when the IP address of the client matches a value in the list of exceptions.

  Mark

• Percentage change customer Bill Split after the invoices are generated

  Hi all

  We have a situation where a project was created with the customer A view 100% contribution and ter customer - 0% contribution. The professional user intended to change the distribution of the invoice and customer B has 100% Contribution and client have 0% Contribution. However, this is not respected, and bills have been raised and revenue recognized for this project. It was discovered while the percentage of distribution of Bill was not correct. Now, the split of the Bill cannot be changed from the application (front-end server) - the field is not update-able and also client B can be seen on the screen.

  Professional users have mentioned that they are capable of-

  1. disable extensions of billing

  2. Enter the negative events to put receipts and invoice at zero

  3 run the recipes and process as requires it invoice

  The amount of customer Bill Split on the project must now be changed. How can this be changed?

  Percentage of customer Bill Split (contribution) can be changed by a script of the database update or is there an API for it?

  Concerning

  Vivek

  Hi all

  I discovered later that this is not possible when the project entered and transactional (revenue generated or invoice is created).

  See document for more details

  How to change the customer or the percentage Contribution of customer sharing on a project with spending or invoices (Doc ID 149127.1)

• When I choose from the LOV, is not stored in the database

  Have a field (Manager) where the user selects their manager in the list (generated by the following query)
  
  Select FIRST_NAME. Last_name d, MANAGER_ID r
  staff
  where TITLE = 'MGR '.
  order by 1
  
  After the Manager is selected and you click on apply changes, nothing is stored in the database.
  
  Have defined as field Manager specifications:
  
  Source: only when the current value is session state is null
  Source type: column database
  Maintain Session State: per Session
  Source of value or an Expression: MANAGER_ID

  Well, how you created this form... manually or by using the wizard. If you have used the wizard, then it would be asked to select the table, and it would have created process for updating the same.

  If you have created this form manually, then you must add a processs to update this database...

  Kind regards
  Shijesh

• SID and the name of the Service on Weblogic Server

  Dear,
  My question is related to the Data Source, when I create a new source of data weblogic server version 10.3.6.0, I have the name of the database as SID not Service name.
  When I put the name of the database in the SID of the error below will appear:
  
  Test failed: listener refused the connection with the following error:
  ORA-12505, TNS:listener is not currently of SID given in connect descriptor
  
  My question is weblogic server version 10.3.6.0 take the name of the database as SID? or there is a way to use the database SID weblogic server version 10.3.6.0 user?
  
  Now I test the name of database on Jdeveloper Version 11.1.1.4.0 and create the new connection to database as below:
  1 - when I choose the SID, the error above is
  2. when I choose the name of Service everything works correctly.
  
  Now I need put the user weblogic server version 10.3.6.0 as SID to be pass and continue working on my project.
  
  Thank you

  $ oerr ora 12505
  12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor"
  // *Cause:  The listener received a request to establish a connection to a
  // database or other service. The connect descriptor received by the listener
  // specified a SID for an instance (usually a database instance) that either
  // has not yet dynamically registered with the listener or has not been
  // statically configured for the listener. This may be a temporary condition
  // such as after the listener has started, but before the database instance
  // has registered with the listener.
  // *Action:
  //  - Wait a moment and try to connect a second time.
  //  - Check which instances are currently known by the listener by executing:
  //    lsnrctl services 
  //  - Check that the SID parameter in the connect descriptor specifies
  //    an instance known by the listener.
  //  - Check for an event in the listener.log file.
  $
  

  Thank you for posting the connection string you use and, since the database server, the result of "lsnrctl services."

• Property in the subsequence charger does not change MainSequence

  We have several tests digital limits in our MainSequence and we want to change the test with the shipper of the property limits.

  If the property Loader consists in the MainSequence (in the Setup program) or in the hand, then the limits change.

  If is a subsequence of the MainSequence property Loader, the limits to change.

  The test limits of numerical limits in other subsequences always change.

  Attached are two examples (Teststand 4.2):

  "PropertyLoader t - work.zip"-consists of the MainSequence property Loader.

  "PropertyLoader don't work.zip"-is a subsequence of the MainSequence property Loader.

  Is this a bug or is this expected behavior?

  Or is there a setting that would make "PropertyLoader don't work.zip" works correctly?

  
  

• How to change the RTDestination property in the section model

  I used the .net api to create a definition of the target of pxi file, but 15550 error appeared when I deploy the DEF. After comparison with the product correct DEF VerStand, I found the property RTDestination in the model section is different, but I don't know how to change it. Any know?

  Hi Nico,

  This solution uses the same API .NET you; Therefore, you can recreate these calls in any environment that you use to programmatically create the definition of your system.

  To explain the image from left to right:

  -First block is known as the Builder of the model and by initializing it with the specified values.

  -Next block, is downcast the newly created model object in a BaseNodeType. This is done by calling in a property of the object model called BaseNodeType (IE. Model.BaseNodeType). it's simply the base type of the model. We have to do to access low level methods.

  -The two blocks are getting and setting of the element XML DLL Path in your system definition file.