Effective way to break up long video file?

Similar Questions

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• Any way to load/buffer a video file without playing?

  I want to read a Flash f4v file, but when I play I want to it must already be loaded and stamped before I send commands to read.

  is there an example someone a hand do that to me?

  My goal is to have some ongoing events in the SWF movie then it goes immediately to play a video, but it must be very synchronized. I don't want to play the video and that the person waiting on the video to load... I want to load the video in the background first... then when it's time for the video clip I send orders to play and everything is good to go.

  Someone of you have helpful suggestions or examples on how to do it?

  If you use FLVPlayback, assigning false to Autorun should load the video without starting to play.

• How to open a video file, Photoshop CC 2015?

  I watched the tutorial and tried all three ways, he suggests opening a video file, with the following error message:

  
  

  Adobe Photoshop CC 2015

  Could not complete your request because the video file could not be opened.

  I tried searching for similar issues and found that my video is perhaps not the right format.

  So, I converted the video file. MP4 to.: AVI

  and:. MPEG-4, without success.

  
  

  Help with this error message would be greatly appreciated, why Adobe doesn't provide answers for error messages that they have code in the program is a complete mystery to me.

  Can you put the video file? What can play you with? What codec was used to encode the video. It could be that Photoshop doesn't have a video codec decode you.

• I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop

  I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.

  I could at some point... but now all I get is audio, no video.  The files open and work on

  my laptop that also uses Windows Media Player... but for some reason now... nadda.  Seemed

  This all started when I upgraded Windows more late service CAP and also installed Real Player.

  Help!

  Hello

  • What version of Windows are you using?

  1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.

  2. the link provided below lists supported by Windows Media Player file format.
  It does not list the AVCHD or. MTS files supported file format directly:
  http://support.Microsoft.com/kb/316992

  3. yet we cannot be sure at this point that the issue is due to interference with some files.

  Method 1:
  Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Method 2:
  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  
  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• 7 OCX WMP on Windows ce 6.0 R3 takes a long time to start playback of video files.

  I try to use the WMP OCX 7 under windows ce 6.0 R3. My application written in c# and works fine, the only problem is the time it takes to start plaing a video file. I noticed that the more the file is large the longer it takes to start. With the debugger, I tried to step of the procedure of game, and the statement that takes all the time is the parameter of the URL property of the OCX.
  Have you ever seen something similar? Can you help me solve the problem? I have not found information about this behavior in on line documentation.

  Hi Danisan,

  Since you are facing problems with Windows CE, you can ask your question in the following MSDN forum to improve assistance:

  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

• What is the best way to record movies on PC and change the names of video files?

  Names of files dvr - ms MCE?

  I use Win XP, SP3, MCE 2005 and I want to change the file name of some of the videos saved on my computer.  Currently I use MCE to record movies at home on my computer and then burn them to DVD.  I plugged the VCR/camcorder for video on computer TV card and MCE set to record 1 channel at say 20:00 and turn my VCR/camcorder to play at this time.  MCE records the film as if it were a recorded TV show.  A few questions:

  Is there a better way to do it?  The home movies are on different formats - Betamax, VHS, camcorder Sony 8 and mini DVD.

  The file is saved with descriptive as - news channel 1, channel information (Direct TV channel label), 20:00, 2 h,-where is this kind of things saved info and I can change it?  If I can change it, what format should I use?

  The video file is saved in C:\Documents and Settings\All Users\Shared Documents\Shared Video\... and the name of the file to this location seems to match the name of the actual file displayed in MCE - but if I want to change to say "Christmas" birthday 2005, can I do without corrupting the file?  What format constraints are there for the name of the file?

  Is there a better way to change the description and the name than just using windows and right-click on the file and selecting rename?

  And just to repeat the first question - is there a better way to record movies on the computer?

  Thank you

  Scott

  Hi Scott,.

  According to the research, the method you follow is the best way to record movies on computer.

  You will need to look for a program that helps you edit metadata.

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Is there a way for the secret video files to the sansa fuze using QUICK MEDIA CONVERTER?

  Is there a way for the secret video files to the sansa fuze using QUICK MEDIA CONVERTER?

  Not really. The way final only ot add videos on the "rocket" is SMC. Rhapsody will do this also, but I don't know that its faster.

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• After effects is stopped and cannot reopen the video files?

  AE as forced leave itself and now will not open my video files because it says it's corrupt, even if she plays well in quicktime. I get this message: "after effects error: file 'MVI_9616.mov' cannot be imported - this 'MooV' file is damaged or not supported."

  What?

  First question. Nothing has changed since this used to work? New anti virus software or update, update the driver, system, codec pack update? Speaking of system, what is your version of OS and AE. Speaking of AE version is up-to-date? If there has been no change, and ae is on the latest version, restart and try again. Try again with a different movie file.

  If AE will not open any file .mov try trashing preferences. If this does not work, you will need to re - install.

• Video files no longer works in LR6

  Video files are now essentially frozen in LR6.  If I go to a video edited file command buttons (such as play, pause) do nothing.  When I try to import or to export video files, LR6 is suspended.

  No such problems with the photo files.

  This has happened recently, after returning to the W10 W7pro.  The PC was having some (not related to LR6) problems with the upgrade of the W10 which he was going back to W7.  But now video files do not work.

  FYI, last night, I installed the Windows 10 'November Upgrade', used to be called (Service Pack). It's the 1st Win 10 service pack after the upgrade I checked and now my Lightroom CC 2015 plays the video as before!

• First breaks down after clicking the imported video file

  After clicking on one just imported the video file (in this case. MOV to a Nikon 7100) application hangs and displays "Adobe Premiere Pro CC 20141 has stopped working" and the problem, the details are below. I tried to reset preferences but do not know what else to try. First starts up fine and I can import pictures very well but any video file (I tried. MOV. MP4. AVI. WMV) that gets imported hangs the software as soon as I try to do something with it.

  Any help would be greatly appreciated!

  -Aisha

  System details:

  Windows 7 Professional, Service Pack 1

  Processor: Intel Core i5 - 4570 T CPU @ 2.90 GHz

  RAM: 12 GB

  Details of the problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.1.0.81

  Application timestamp: 5426694c

  Fault Module name: devenum.dll

  Fault Module Version: 6.6.7600.16385

  Timestamp of Module error: 4a5bded7

  Exception code: c0000005

  Exception offset: 00000000000016a 0

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: ec5a

  More information 2: ec5adb2545b190cc19da7bdfa78d5bf1

  3 more information: 52eb

  Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Create a new project and without importing anything, go to file > project settings > General and change the playback engine Mercury to the GPU acceleration only software and click on remove previews after clicking OK. Then import the media.

  Hope this helps,

  Regalo

• video file from Flash cs3 as2 break

  Flash cs3, as2, win xp

  I want to import a file .wmv in flash. When you press "play" button, the video file must be played. but I want the video to be paused when you (preferably) the same game again.

  so:

  -How to pause an imported video file?

  -How to control play / pause the video with the same button?

  Click on your component and assign an instance name (in the properties panel, for example, flv_pb).  If you have a movieclip button (for example, btn), you can use:

  {btn.onRelease = function ()}

  {if(!this.) Toggle)}

  flv_pb.pause ();

  } else {}

  flv_pb. Play()

  }

  This.Toggle =! This.Toggle

  }

• Vista I can't send messages windows w / attached a video file of windows

  Vista I can't send windows mail w / attached a video file of windows. After 4-5 minutes, I get an error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic 'we go, into the wild blue... ', account: 'windows mail', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: 421 Service not available; Closure of transmission', Port: 465, secure (SSL): Yes, Server error: 421, error number: 0x800CCC0F

  You can go to tools | Accounts | Mail | Properties | Advanced and then set it to to break messages greater than 5 megabytes.  They will be sent in parts and can be reassembled on the other end, depending on what email client uses the receiver.

  Which could overcome the limit of size in this way.

  Steve

• Treatment of small video files in a project

  Hello

  I use after effects to a video creation consisting of many other small videos. And here's my problem with him:

  Whenever I have added a small video file for my project I just need only a small fraction of it. But these small fractions are not normally at the beginning of this file. Which means that I have to drag and drop the file several times to the left. Is there a way to speed up this process? Maybe as each video file droppped into my project starts at the level of the mark 2 min or something? I then would save a lot of time to drag things around.

  My other problem is that I have over 200 videos, I need to put into my project. But their import and later research in these videos takes a long time. Is there perhaps a way to fix that too? Normally, I do not know before the end of the project which, of these 200 videos, I need (normally only need 20 to 30 of them, so I put them all in there).

  Thank you very much for all the advice

  Chris

  PS: on a technical level: I have 4 GB of Ram, but it seems after effect uses only 50% (with the help of win 7 64 bit). Can I increase this? And also, what part of my computer would increase the working speed in after effect most (I don't want to make since I do that on another computer, I only mean put 200 videos in, drag and drop things, previews etc.). An SSD fix might that be?

  You can also set points in the window film in the latest versions of After Effects and output. I do it all the time.