Eject the CD/DVD of VAPP model

Similar Questions

• to eject the CD/dvd drive

  I watched a dvd on my computer. Now, the disk won't work. I tried to hit the eject button on my computer, I tried going to computer, hit the button for the disc and then hitting eject. I also tried the thing of a paper clip. I've never had this problem before. What should I do?

  leopardclaw,
  The disc is always running or is he arrested?  If it runs at all times, he won't allow the disc to be ejected.  What software you used to watch the movie?  Have you tried to load the software to see if the film will play?  Then you can tell him to stop and eject the disc.  If the disc does not turn, go into Device Manager and see if it sees the drive and if it has no exclamation mark above him.  Try reinstalling the driver to see if that gets the drive works again.  If it does not, and does not appear in Device Manager, it is possible that the player has gone wrong and you may need to get a computer tech to look at it.

  Let us know if this has been useful and how we can help you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Eject the CD/DVD/HDD?

  Hello:

  My new Inspiron 3847 arrived this week, and I use it for the first time.

  It was quite difficult to find the hard drive, once I found it behind the super secret backdoor, I put in the disk of driver provided with the computer monitor.

  Now, I want to install my printer, but I can't find any way to open the hard drive.

  I searched the forums and found that I need to press 'Function + F4' to eject a disc.  What happened to the button "Eject" on the hard drive itself?

  Anyway, I can't find a 'Function' button on my new Dell keyboard.  I know that I bought a model of economy, but the "Function" button was not yet available when I ordered the system.

  In the same sense, I know that the 'Crescent Moon' button above the button 'Clear' keypad not a nor order. But there it is. Fortunately, this one is not connected to anything, because nothing happens when I push it.

  Does anyone have any suggestions?  I really don't want to go with the way "of a paper clip in pinhole".

  Thank you

  jes218

  Try F12 - opens the drawer.  Or, look for the icon of the drive in the applet on the computer and right click on the DVD drive - there is an eject option.

• Satellite A300 - is not eject the CD/DVD drive

  I have exactly the same problem with my 4 month Satellite A300. Every now and then and apparently without cause, the CD-ROM drive (Mat * a DVD - RAM) refuses to open. The little light near the eject button flickers when the button is pressed, but nothing. It will do if the drive is empty or not. Device Manager can see the disk and claims that it works correctly and that the driver is up-to-date. But if, for example, I display open with a trombone player and load a DVD, ImageBurn (which could also see the drive) calls for a communication error (e/s).

  Nothing seems to make the drive to work once he got into this State with the exception of a reboot, and even in this case we know remain 'dead' until a second reboot.

  I followed the instructions on [this site | http://www.randomfix.com/2007/04/12/windows-vista-%E2%80%93-missing-cddvd-rom-drive/] and the disc looked good for three days, then made his old trick. I checked the registry and the filters that I removed is still deleted. I uninstalled the drive via the Device Manager and let Vista find again to restart. Everything worked fine for 24 hours then the problem comes back.

  When the drive opens the button it works perfectly in all ways music - reading, writing, start, DVD...

  Very frustrating.

  The above post was originally a response on an existing thread, so I don't know where the rest disappeared. And I can't change it. This forum works as well as laptops.

  Post edited by: Mick_P

• Connect the external DVD player to Satelite Z930

  Hello world

  I recently bought a Toshiba external dvd drive, which officially supports win7 and Vista (no mention of 8) of the brand.

  The external dvd drive is model PA3834A-1DV2 aka Portable SuperMulti Drive

  When I connect this drive with one or two USB connections (SuperMulti drive has 2 USB connections), there's enough power to the drive eject and spin, but the computer does not display the drive in my computer. It is displayed in Device Manager with a yellow exclamation however.

  Y at - it no formal or informal word there is a way for this device works with Windows 8 on the Z930?

  My apologies if I should have posted this in a different thread.

  Which is really strange. I have the external BD drive and it is automatically recognized by Win7 or Win8.
  You use original Win8 preinstalled that you got with your laptop or you install on your own?

• eject the disc from the drive USB Super

  Last night I unboxed my new USB Super drive and attached to my MacBookPro. I put in a DVD of registered film and was able to start playing. Then I ejected it by clicking on the disc icon on the desktop, because I was just testing how it connected etc...  Then, I wanted to see if he could save.

  I inserted a blank DVD and he asked me to tell him what to save, but I didn't save. Instead, he presented another option, which was to IGNORE.

  So I clicked on IGNORE. As a result, there was NO ICON ON THE DESKTOP for this drive. And the text to EJECT in menu bar is grey.

  Now I am sitting here with a new USB Super with a blank CD disk stuck in it and am totally IGNORED, I asked, but what I didn't know when I asked to ignore me.

  That's the problem. I disconnected, signed back in, and he has not yet cleared my instructions to ignore. So I can't eject the blank DVD disc.

  Where should I go from here?

  My MacBookPro is the retina, i7, 15 '' running ElCapitan, a model community 2015, I think.  I'm not on it now, but will open it to follow the suggestions for help. I'm a new converted to Apple, computing, coming from Windows, so I need the regular basic directions. Any help is appreciated.

  Five ways to eject a CD or a stuck DVD from the optical drive

  Ejecting the disc stuck can be done in one of the following ways:

  1 restart the computer and after the buzzer, press on and press and hold the

  left button of the mouse until the disc ejects.

  2. press on the button of your keyboard.

  3. click on the button in the menu bar.

  4. press COMMAND-e.

  5. If none of the above works try this: open the Terminal application in

  your Utilities folder. At the prompt enter or paste the following text:

  / usr/bin/drutil eject of

  If this fails, then try this:

  Start the computer in single-user Mode. At the prompt, enter the same command as used above. To restart the computer enter 'reboot' at the prompt without the quotes.

• Workflow to deploy several vApps model

  Hi all.  We have a new vCO + vCD 5.1 setting up the environment in my organization and I want to implement a simple workflow to Instatiate X number of vApps from a chosen model.

  I'm a total noob/newbie here.  The workflow library 'Instantiate VAPP model', that's exactly what I want it to do, but for only a paralytic.

  Guidelines of thoughts as to what high level steps, I would need to take to customize this workflow for a number of times on the basis of "loop"?

  It is quite easy to add a new entry and the introduction screen to enter the number of the user, but I really have no idea where to start on the loop.

  One thing I want to avoid it is for a full to be created and launched upward VAPP and complete all tasks, and then it starts the next iteration of the loop (which would take forever).  I would prefer instantiate the full number of vapps together and wait that fill them all, and then move to their departure at the same time and wait for all the startups end.

  Any ideas or advice on how to come to this?  (once again, total noob).

  Thank you, in advance!

  Here are step by step instructions on the top of my head. There are certainly other ways easier to do.

  Create a workflow.

  Do drag & drop the instantiate a workflow of VAPP model

  Right click / Copy presentation wf.

  -> You have wrapped the instantiate workflow in a parent workflow.

  You can now remove the instantiate a workflow of VAPP model from a schema because we ask it with a different way.

  Add the workflow 'Start the workflow at the same time' to your schema. Bind its entries 'wf' and 'settings' with the creation of new attributes of workflow. Settings, we don't have to be defined. To the ICF one set with the I ' nstantiate a VAPP model "workflow."

  Add a script task. In this task scriptable entries add all entries in your workflow.

  Create a 'number' entry in your workflow. Add it as well as your task scriptable entry.

  Add an output to your box of scriptable and assign the attribute "settings".

  We now need an array of input parameters to feed our workflows.

  parameters = new Array();

  for (var i = 0; i)

  var wfInputParameters = new Properties ();

  wfInputParameters.put ("vAppTemplate", vAppTemplate);

  wfInputParameters.put ("vdc", vdc);

  wfInputParameters.put ("name", name + number);

  wfInputParameters.put ("description", description);

  wfInputParameters.put ("deploy", deploy);

  wfInputParameters.put ("powerOn", powerOn);

  wfInputParameters.put ("eulaAccepted", eulaAccepted);

  wfInputParameters.put ("runtimeLeaseHours", runtimeLeaseHours);

  wfInputParameters.put ("storageLeaseHours", storageLeaseHours);

  wfInputParameters.put ("linkedCLone", linkedCLone);

  Parameters.push (wfInputParameters)

  }

  On the diagram, you should link.start-> special sriptable-> beginning of the workflows in parallel

• A60 normal DVD - RW eject does not not (using hole to eject the disc to eject)

  Satellite A60. I have a niggle for a problem. The drive from dvd - RW drive intermittently fails to respond to eject the command when a right click (or button) when a disc is inside, use eject hole on the face of the draw, when empty, it still works.
  Chris D

  Hello

  You have this problem with the media or simply with a specific?

• Reader SuperDrive plays movies, CDs, but ejects the DVD-R

  I am trying to burn a DVD - a first in a long time.  My circa 2010 Mac Pro with Superdrive is eject the DVD-R discs, but fortunately plays DVD movies and CDs.  When you insert a DVD-R, the drive through 2 cycles of what seems to be the reading of the disc, then automatically opens the Superdrive drive door.  No idea what this problem is?

  Thank you.

  Try a cleaning disc. different lasers are used for reading and writing CD and DVD, and so perhaps only a dirty laser lens.

  Cold otherwise be hardware problem with the drive.

  Have you tried a different brand of DVD?

• cannot eject the dvd from studio 1737

  cannot eject the dvd from studio 1737 laptop

  Hello

  If they don't help then check with the manufacturer of system and/or car manufacturer
  Support, their documentation online and drivers and ask questions in the forums (if any) on
  known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can
  wand, a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  -----------------------------------------------------------------------

  You can probably find more info here with a CD/DVD-related hardware problems.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't eject my cd from the cd/dvd internal drive

  I can't find the cd/dvd internal drive in Windows Explorer.  Without seeing the car, I can't eject the cd inside.

  Hello

  Follow these steps and use a paper clip to open the drawer

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

  so try these fixes

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Unable to add data to the Virgin DVD + RW double layer after having ejected backup problem.

  Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.

  Hi sal69,

  This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.

  You can follow the steps mentioned in the link below

  You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista

  http://support.Microsoft.com/kb/928355

  You can download and install the latest service pack on the computer

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• eject the DVD from the laptop

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  What eject button used?
  There is a law on the CD/DVD tray. Press this one manually and the status bar is supposed to open.
  It is a when you click Open the DVD/CD drive (mine is drive E), and there is an eject button to the toolbar.

  t-4-2

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.