Reader SuperDrive plays movies, CDs, but ejects the DVD-R

Similar Questions

• PS CS6 ejects the dvd (mac) before reading.

  PS CS6 ejects the dvd (mac) before reading.

  Download it here, but please follow the instructions carefully or the download link does not work.

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  Gene

• cannot eject the dvd from studio 1737

  cannot eject the dvd from studio 1737 laptop

  Hello

  If they don't help then check with the manufacturer of system and/or car manufacturer
  Support, their documentation online and drivers and ask questions in the forums (if any) on
  known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can
  wand, a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  -----------------------------------------------------------------------

  You can probably find more info here with a CD/DVD-related hardware problems.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.

• Pavilion Touchsmart 17-e123cl: reading a VOB file on the disc is pixelated and its so strange, but from the dvd is ok.

  Hello

  I have a laptop of 17-e123cl Pavilion Touchsmart with installed PowerDVD12.  If I play the videos from the drive VDV plays it very well, but if I copy the DVD to the hard drive and try to play there the image has a lot of large blocks and horizontal bars in the picture and the sound is messed up.  Since the HARD drive is a 1 5400 to disc it should be even faster than the DVD player, but it looks like that is the question.  Is there any other driver that I need to get things working correctly from the hard drive?  When I travel, I can't bring DVD in some countries, but the movies on the hard drive are not a problem (normally).  Same thing happens if copied to a flash drive.  Any suggestions?

  Thank you

  Rick

  Hello

  Yes, this is the problem because they are two different file systems/structures. Normally you rip the DVD to a correct video file format and view on your computer. Please try:

  http://www.winxdvd.com/DVD-Ripper/

  http://bestfreedvdripper.aolor.com/

  http://www.Instructables.com/ID/how-to-rip-DVDs-for-free-with-VLC/

  The first is very popular.

  Kind regards.

• Windows Media Center plays soundtrac film but not the video.

  My Windows XP Media Center plays the soundtrac of movies but not the video.

  The display shows the similar factals when music is played.

  Latest WMC has been installed

  Any ideas?

  Hello

  1. do you know the file type you are trying to play?

  2. this happens with all DVDs you play?

  3. do you get an error message?

  Step 1: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.

  Codecs: Frequently asked questions

  Step 2: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.

  Install Windows updates

  Step 3: Adjust graphics hardware acceleration. To do this, follow these steps:

  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  b. click on advanced settings.

  c. click the Troubleshooting tab, and then click on change settings.

  d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).

  e. click OK, and then click Restart now.

  I hope this helps!

• Satellite L455 - Burned DVD plays in slow motion in the dvd player

  Hello

  I have a Satellite L455.

  I got burned a DVD with Nero 7 premium, but when I play in the dvd player, it works idle all the time. Other movies are played normally (so the problem is not the dvd player phillips), this only happens with the ones I burned in my new Toshiba laptop.

  I have tried to burn all kinds of speed (x 8, 6 and 3), but the problem has not been resolved.

  Can someone tell what should I do?

  Thank you.

  Hello

  You tested this external DVD drive?
  I recommend to check the options of Nero again and maybe, you should also use an other DVDs from different manufacturers.

  My DVD player didn t play DVD's serious too, I changed the manufacturer of DVDs and then the DVD that can be read by a DVD player

• eject the dvd

  I inserted the original disc to reinstal lmy printer software. I feel stupid, but I can't find anywhere to eject the disc

  Thanks for trying it. but your advice is not for my 600 touchsmart computer.  I managed to finally solve the problem on mine

• My reading and writing system does not recognize the DVD. For this CD. I don't know why.

  For a long time my system CD/DVD in my laptop Del Estudio 1537 worked perfect. But all of a sudden my computer does not recognize or read or burn DVDs. Can you help me fix this problem?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Remove the key only to eject the dvd, they will not delete

  I have a Samsung 700 PC series laptop with a Matshita UJ8A7AS drive. I have informed keyboard option, it has Win7 home premium 64 bit.  The DELETE key was 2 options, DELETE the key worked to remove items highlighted or selected. In the text, he would remove characters to the right of the Courvite. By pressing keys Fn and delete entire would eject the disc of the power optical drive slot. NOW it will only eject function, as if using the Fn + delete key combination.  The Fn key does not stick. This works for all the other key combos.  I have all the updates. I lived integrated help and support, convenience stores, several research and MS Knowledge Base online. I have not knowingly changed anything. Any suggestions?

  This isn't something that Windows can help you to, the implementation of functions Fn on the abstract material level.  Windows operating system doesn't 'see' this key (indeed this Fn button is not to dismiss the screensaver).

  Most likely, there is some type of "Fn Lock" that has been activated.  But you really want to contact Samsung directly to find out how to disable or to work with her.  The controls/options so that it will apply only to Samsung and is not part of Windows.

• Force ejecting the DVD of the external drive

  I need to force eject a DVD into my external drive attached to a MACBook Pro.  I'd appreciate any help - I know there is a way to do this!

  Launch the Terminal.

  Applications > utilities > Terminal

  Type in drutil eject external  internal

  Press ENTER.

• I can't eject the dvd from the drive

  Windows media DVD player

  When I try to eject my dvd it want to release. What can I do to get out the dvd

  There should be a small hole near the drawer in which you can insert an unbent paperclip.  This should force the drawer open.

• eject the DVD from the laptop

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  What eject button used?
  There is a law on the CD/DVD tray. Press this one manually and the status bar is supposed to open.
  It is a when you click Open the DVD/CD drive (mine is drive E), and there is an eject button to the toolbar.

  t-4-2

• play movie clip symbol at the end of the animation, but does not appear in the timeline

  Work in Adobe Flash CS5

  When I play my movie in the Flash file, the animation stops at the end of the timeline, as it should. But when I test the movie, or export it to any film format, it will play an instance of a movie clip symbol that I used in the animation. There is no extra frame in the timeline panel beyond which must be considered to be the last image. Y at - it a setting or something I forgot that could cause this instance of the symbol to play at the end of the animation, without air in the main timeline? This can be corrected?

  your movieclip (or a parent) who plays on the main timeline or is loaded by your swf.  If you load this movieclip (published as a swf file), you can be sure that your movieclip (or a parent) is the culprit.

  Use the movie Explorer to find all instances of your movieclip using the library for this movieclip name.  If that does not reveal the culprit, you have either made a mistake in your search or if you have a movieclip in doubles.

• Matshita UJD360 burner will read CDs but get the error message indicating that Windows Media Player has to close when I try to burn

  HELLO, I HAVE A CD/DVD EXTERNAL BURNER, IT READS THE CD AND IT RECOGNIZES THE VIRGIN CD, BUT WHEN I PRESS ON THE "START BURN" BUTTON, I GET A MESSAGE SAYING THAT WINDOWS MEDIA PLAYER SHOULD BE CLOSED, HE DOES IT ALL THE TIME

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you are facing some problem with Windows media player.

  He would be grateful if you can answer this question in order to help you further.

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3 is the issue limited only when burning to disc?

  I suggest you to consult the following Microsoft article if you are using the Windows XP operating system.

  Windows Media Player has encountered a problem and needs to close: http://support.microsoft.com/kb/555494

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.