Eject the USB, drm.bak, merits of case files

Similar Questions

• Cannot eject the USB device.

  Cannot eject the USB device. I don't see the icon to safely remove in the task bar.
  I tried to run the following path, but not luck.

  (C:\Windows\System32\rundll32.exe shell32.dll, Control_RunDLL hotplug.dll)

  The icon is hidden behind the small arrow in the lower right of your screen.  Click on that, and you will see a number of icons, which one will remove safe material one.  Be aware that unless you have a removable USB device connected, the icon will not be there.

  Good luck.

• Therefore each SATA in my Win7 x 86 device listed as an ejector device when I'm ready to eject the USB device?

  Just at the moment where I thought that my Windows 7 Pro 32 bit environment worked perfectly, one day, I was ready to eject a USB device, I plugged, I saw ALL my devices SATA appearing alongside my USB items which have been plugged, including my C drive!

  Why is this?  How, all of a sudden all my readers (internal and external) appear as removable safely disks in my Win7 32 bit and not in my Win7 64-bit (yet)?  And how can I fix this problem so that my SATA devices are not among my USB devices?  One SATA device should be listed; and this is my backup of Master, plugged in a socket of SATA_A1, for which the SATA_A2 is shared by the eSATA plug.

  Here is a little information about my hard drives and the ATA channels to which they correspond:

  B: System reserved / F: 64 - bit Windows 7 - ATA Channel 0

  [Simple walk; reserved my win7 system 64-bit is not hidden to prevent my win7 32-bit access it.]

  X: Master Backup - ATA Channel 0

  [No misspelling; my Device Manager is showing TWO ATA Channel 0 s in the list of ATA/ATAPI IDE controllers.]

  C: 32-bit Windows 7 - ATA Channel 1

  [The main reader.]

  ATA Channel 1

  [Unknown as of yet what this ATA Channel 1 corresponds to.]

  Primary data G: - ATA Channel 2

  [For additional storage.]

  Secondary data H: - ATA Channel 3

  [For additional storage.]

  D: Blu - ray - ATA Channel 4

  E: DVD Burner - ATA Channel 5

  Now for my Win7 64-bit, Disc C installation (which is my first hard drive) represents my 64-bit Windows 7 and partitions B and F (for my second hard drive) my 32-bit Windows 7 with its partition system reserved for B.  Everything else is the same, but...

  ... In my Win7 64 bit environment, my IDE ATA/ATAPI controllers list has only 2 ATA channels; 0 and 1, no duplicates.  I haven't checked for correspondence of these channels, but I'll bet that channel 0 belongs to Drive X and 1 channel belongs to the C drive.

  How is it that, in my environment 32-bit, an ATA channel has been assigned to each disk in my machine, and how to disengage and remove the assignments without losing access to all these readers?  I don't have this problem before, and I can't determine when the problem first occurred.  I can't uninstall ATA channels 2, 3, 4 and 5 of my device manager, afraid that the corresponding drives disappear from my Explorer and becomes completely inaccessible.

  UPDATE:  He finds that, for some unknown reason, my SATA AHCI controller has been replaced, which displays all my readers as removable.

  First thing I did was make an update, I think it was almost a downgrade, to the standard AHCI driver provided by Windows.  All readers always displayed as removable.

  Then I did an update; This time, instructing the Device Manager to search for the driver accompanying DVDs of the card from my mother...

  ... And here!  After a restart, only displayed as removable drives are X Drive and everything I plug into the USB ports.  In my device manager, only ATA 0 and 1 (no duplicates) channels are displayed.

• Can not get the correct message eject the USB mass storage device

  I get a message saying "Windows cannot stop the 'Generic Volume' device because it is in use."  Close any programs or windows that might be using the device, and then try again later.  As far as I know, everything is closed.

  Try using Unlocker:
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

  Read CNET Editors note': Unlocker includes the software provided option. The provided software are installed by default, you can choose not not to install them by unchecking the boxes during the installation.

  After installation, you can right click on the drive, choose Unlocker from the context menu, you will see which locks your drive then you can click on the "Kill process", "Unlock" or "Unlock all" buttons. You can then use the Safely Remove Hardware.

• HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

  Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

  Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

• USB key contains VMX and VMDK files, I import them to an ESX Server 3.5

  I use VMware Workstation to use these virtual machines, but now I would add these virtual machines from one ESX Server. Each virtual machine is in its own directory on the USB drive and each folder contains files etc, vmxf, vmx, vmdk. What is the best way to get these on a server ESX from external USB drive?

  Or install the stand alone vConverter. It's free and it's the part of the VC you would use anyway. So I just install the vConverter and import your virtual machines to do. After they are imported, you'll need to register virtual machines.

• Satellite L510 - WLAN disconnects after having ejected the disk USB

  Hey.

  I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

  What's happening:
  After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

  I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

  HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

  I would really appreciate if someone could provide any kind of fix for this.

  My laptop:
  -Satellite L510
  -Windows 7 64-bit OS
  -pentium (R) dual-core CPU T4500 2.30 GHz
  -2 GB of ram

  Hi captainmarvel,

  Just a simple question: have you tried to update the driver WLAN?
  New driver WLAN, you can find on the official website of Toshiba in order to check this!

  Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
  You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?

• How to eject the disc from the drive superdrive usb?

  How to eject the disc from the drive superdrive usb?

  -Drag / drop the icon for the CD in your trash

  -Restart the computer and after the buzzer, press in and hold the left mouse button until the disc ejects.

  -Press on the button of your keyboard.

  -Click the eject button in the menu bar.

  -Press on COMMAND-E.

  -Open the Terminal app in your Applications/Utilities folder. copy and paste the following text:

  / usr/bin/drutil eject of

• eject the disc from the drive USB Super

  Last night I unboxed my new USB Super drive and attached to my MacBookPro. I put in a DVD of registered film and was able to start playing. Then I ejected it by clicking on the disc icon on the desktop, because I was just testing how it connected etc...  Then, I wanted to see if he could save.

  I inserted a blank DVD and he asked me to tell him what to save, but I didn't save. Instead, he presented another option, which was to IGNORE.

  So I clicked on IGNORE. As a result, there was NO ICON ON THE DESKTOP for this drive. And the text to EJECT in menu bar is grey.

  Now I am sitting here with a new USB Super with a blank CD disk stuck in it and am totally IGNORED, I asked, but what I didn't know when I asked to ignore me.

  That's the problem. I disconnected, signed back in, and he has not yet cleared my instructions to ignore. So I can't eject the blank DVD disc.

  Where should I go from here?

  My MacBookPro is the retina, i7, 15 '' running ElCapitan, a model community 2015, I think.  I'm not on it now, but will open it to follow the suggestions for help. I'm a new converted to Apple, computing, coming from Windows, so I need the regular basic directions. Any help is appreciated.

  Five ways to eject a CD or a stuck DVD from the optical drive

  Ejecting the disc stuck can be done in one of the following ways:

  1 restart the computer and after the buzzer, press on and press and hold the

  left button of the mouse until the disc ejects.

  2. press on the button of your keyboard.

  3. click on the button in the menu bar.

  4. press COMMAND-e.

  5. If none of the above works try this: open the Terminal application in

  your Utilities folder. At the prompt enter or paste the following text:

  / usr/bin/drutil eject of

  If this fails, then try this:

  Start the computer in single-user Mode. At the prompt, enter the same command as used above. To restart the computer enter 'reboot' at the prompt without the quotes.

• What is the MTBF for the USB-6009 case

  What is the average time between failures (MTBF) for the USB-6009 case?

  Hello

  Unfortunately, there is no available for the USB-6009 case MTBF.  In order to retrieve this information, there is a cost for our R & D department.  If you need this number, please contact your local representative OR or open a service request to ni.com/ask.

  I apologize for the inconvenience.

• How to configure the PFI0 terminal on the USB-6009 case as came event counter

  I'm watching the 8 inputs on the USB-6009 case and when fires Terminal PFI0 start saving the data.

  Y at - it and why to read the 8 inputs while monitoring the PFI0 terminal? I appreciate any help!

  Hi yacs1,

  You can certainly do.  I assume that you already have your 8 entries read correctly.  Everything you have to do is now to put a statement button in your loop that is controlled by your pfi0 line.  If this line is high, then save the data, if it's low, then only display data of your control.  If you need help reading the pfi line, open finder example under help > find examples.  Then go to the material input and output, reading Dig channel DAQmx, numerical measures.  If you need help logging data, go in Fundamentals, file input and output, and then depending on what type of file you want to write to, find the appropriate example (IE write into text file).

  Let us know if you need more assistance,

  Ryan

  Technical sales engineer

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Can I eject my usb devices connected internal SATA hardrive...

  OK we know that when you plug in a usb flash drive, you can click on the usb icon in your taskbar and then eject the device... Well well my internal sata HDD my OS running on shows in this list as well! I think it's a bug. Just a thought.

  Hi, the fireballs
  I don't know if this is a bug or not, but it is interesting.
  I think that I him would NOT eject just in case. He'll probably just a mistake.
  But as I said, I wouldn't do it. It could make your system unbootable.

  If you want to report to Microsoft and see what they say, I included a link to a site for reporting something 'interesting '.

  http://connect.Microsoft.com/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MacBook retina cannot find the USB hard drive when it is plugged again

  Hello world

  I have a MacBook retina 2015 computers and a hard drive WD elements USB3 that I use as a Time Machine backup when they travel. The drive is plugged into the USB - C through one of the Apple dongles and when I first start the computer, the USB is mounted and that it appears on the desktop. He does everything very well.

  When I want to take the machine away, I eject it, wait for the secure message and then physically disconnect the drive. However, when I go back and reconnect the drive, the Mac did not see it. The reader will be able as the light comes on and I can hear it turn. Just, it is not mount and is completely invisible for MacOS.

  I checked all connections, even used another dongle - no luck. A disconnect does not set, and I tried to reset the NVRAM. So far, the only solution is to reboot the Mac, afterwards the player reappears - at least until I need to unplug it again.

  Anyone got any ideas what is underway and if there is a fix?

  Thank you very much

  Mike.

  Hello, Mike Richards2,.

  Thank you for using communities Support from Apple!

  This is I think understand that you are not able to see an external hard drive when it is ejected, and then reconnect the computer.  I have some suggestions that I hope will help you.

  It is important to try to isolate what is responsible for this.  The first thing to do to help isolate what is causing the problem is to start the computer in what is called Safe Mode and see if the problem persists.

  Start in safe mode:

  1. Choose the Apple menu > shut down.
  2. After your Mac stops, wait 10 seconds, then press the power button.
  3. As soon as you hear the startup tone, hold down the SHIFT key.
     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  OS X El Capitan: start in safe mode

  Once the computer is running in safe mode, see if you can duplicate the issue.  If the problem does not appear, go ahead and try to reboot normally again.  If the problem has disappeared, it may have been caused by a problem of file or directory of cache fixed by booting in safe mode.

  If the question comes up, you'll want to check the login items.  Follow these instructions to remove the connection:

  OS X El Capitan: If you think you have incompatible connection points

  Remove the connection, restart the computer and see if the problem persists.

  Have a great day!

• Help ejecting a USB media player

  Hey Apple community support.

  I hope someone can help me with this. I'm a decent person tech, but far from the level of knowledge that most people seem to have, so if you are trying to help them, don't forget not that I'm a novice you may literally he dumb down for me.

  Problem:

  I recently went on a trip and took lots of photos on SanDisk 32 GB cards. I have a docking station USB with the card inserted and recognized on the desktop of my MacBook Air. I started to transfer the files from the folder DCIM by selecting all the disk and try to move them to a folder I created on the desktop. The file transfer was fine, but time consuming. After an hour or two, I told him to stop copying. This function has never been resolved.

  Solution try so far:

  I try to eject the drive by dragging it to the trash (showing the eject icon when I go on it) and I get the message, "volume cannot be ejected because it is currently in use...". »

  I open the activity monitor and tried to find the name of the reader, who is not listed. I left the USB drive options in the activity without result monitor. I can still see the red light on the media player.
  I don't want to damage the photos of this once in a life journey, so I have not removed the USB media player without eject properly and did not attempt to stop the machine as one, that can be bad... and two, I doubt he'd let me without forcing an abandonment, although it may help me identify what process to kill so that I can restart.

  Any ideas? Thoughts? Suggestions?

  I have what looks like most of the pictures in a folder on the desktop, is simply not sure if it's to each of them... and the problem so far (I don't know if it's because the media is always 'in service' or not) I can see the icons .jpeg, but he cannot click on it to see the pictures... (again once I guess because it is in use) but I'm afraid of losing data if they are not transfer completely...

  Any help would be greatly appreciated!

  Thank you!

  Finder sometimes has problems when it receives a large number of files to copy - but this isn't a problem. On the other hand your initial problem (the copy of the slow copy files) may be due to a problem with the card. Once you have copied the files to reformat.

  Failure of the Finder to leave a copy command is a fairly common problem that can be solved by stopping Finder. Hold down command and Option and then type Escape. This will bring up the menu to force out. Choose Finder and click Restart. It should restart on its own. If it doesn't, try clicking on the Finder on the dock icon. Sometimes you don't have the choice, but force him to leave the computer when the Finder dies suddenly. (Hold down power for 10 seconds).

  Because Finder has not left the copy files are in fact still in use. Leave the Finder should solve this problem. Even if files in use error that appears you should get the option to force eject restarted Finder. Who will be safe to do so. Ejection of strength so that files are read is not dangerous - when they are written that it is.

  Finally, try to copy a small set at once and not any map in one fell swoop.