El Capitan 10.11.5 Spotline problems and problems of network

Similar Questions

• After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem

  After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem again.  The computer turns off and sometimes it takes me an hour or two to get started again.  Help, please!

  refer to this article and move forward with the NVRAM reset at the end.

  Reset the management system (SCM) controller on your Mac - Apple Support

  If the problem persists, how long have you made it Go?

  I would bring out there, but first call Apple.

• I would like to know if the new operating system Mac El Capitan will work ok with LR and PS CC 2015.  Download no problem?

  I would like to know if the new operating system Mac El Capitan will work ok with LR and PS CC 2015.  Download no problem?

  Yes, it is compatible. For more information, please see the system requirements | Cloud Creative

  Concerning

  Hervé Khare

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• WMware el capitan apple id server connection problem

  Hello

  I just bought mac os x mountain lion and I install machine wmware virtual. When I level to el capitan, apple id server connection problem came. I have try so much to solve this problem, but I couldn't fix it in any case. When I'm not using the network it works perfectly fine, but if I use the network working I can't connect store mac or itunes or icloud. I spoke with the administrator of this issue, he could not find a solution too. Is there anyone know of this problem or what we should do to overcome this problem.

  When I try to open an app store, itunes, icloud or imessage session, he said: "there was a connection to the server id Apple error."

  Have you seen this page? A few bugs have been reported there for this error message. One of them is related to a proxy server and can be done with a computer serial number

• El capitan update taking 30 mins excess and starting to install. is this just an i5 processor?

  I tried to install the last update at el capitan and after the reboot, the screen goes white with just the cursor indicating for 30mins + and waited so he can continue starting.  I waited 17mins first, then tried to turn off and then turn it back on.  He did the same thing again. My machine is a model (October 2015) 27 "recent iMac running a processor i5 and 8 GB Ram

  Don't know if it will make a difference, but you can download the update Combo here, Download OS X El Capitan 10.11.6 Combo Update and then install. Once the installation program will restart you will get a black screen for a short time, then the Mac should start to a gray screen with the Apple logo and a progress bar, which should show an approximate count.

  Make sure that your Mac has enough free space, 10GBs or more must be fine and also use disk utility

  to perform a check on the disk before and after everything settles. If she needs repaired, you start in your recovery Partition and disk utility.

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Try starting with the ALT key down.  It waits for you to choose a library to open it.  If it does not open your library then there is something wrong with the library.

  Try running after have connected you to your computer under another account if it works, there is something wrong with the configuration of your account

  Try to remove and then reinstall iMovie

  Geoff.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422).

  OT: Problems with Microsoft Store for a computer in windows 8.

  It keeps saying we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422). Please help me thanks

  Hello

  Try the steps mentioned here and see if that helps:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  If the problem persists, try to create a new user account.

  Hope this helps, good luck :)

• CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

  CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

  Many people find such problems with CS6 in El Capitan. There will be no update for CS6, it has reached its end of life.

  You must go back to the previous version of the operating system, or upgrade to creative Clud.

• Alternatives for Nikon strap if you use OS El Capitan? It is completely inexcusable and has gone unresolved too long!

  Alternatives for Nikon strap if you use OS El Capitan? It is completely inexcusable and has gone unresolved too long!

  It has been corrected in Lightroom CC 2015.4 / LR 6.4.

• Since the installation of EL CAPITAN, I can't open pictures and iPhotos with photoshop, CS6, nor my mails with Office Word

  Since the installation of EL CAPITAN, I can't open pictures and iPhotos with PHOTOSHOP CS6, nor my mails with office Word

  Hi denisb,

  If you are not able to open the Photos App images directly in Photoshop then, this is the expected behavior as App Photos does not allow for any third-party application interact with it directly.

  You must export images from the Photos App and then open in Photoshop.

  Refer to this link: How to use an external editor with Photos for OSX | IVous

• Lightroom question: my mac crashed, had backups, installed new OS 10.11 EL Capitan, use creative cloud for PS and LR, where go my Presets to develop, can not find them anywhere, any suggestions, thanks.

  Lightroom question: my mac crashed, had backups, installed new OS 10.11 EL Capitan, use creative cloud for PS and LR, where go my Presets to develop, can not find them anywhere, any suggestions, thanks.

  
  

  
  

  Thanks for the info, will try that.

  Sent from my iPad

• Problems of network with the Portege R500

  I reinstalled a R500 (actually downgraded from VB to XPP) and after loading all that I get a dynamic IP from the DHCP server and I can ping computers on the same local network... but I get no response when ping any device on WAN and, of course, I can't access the internet.

  Any ideas of what it is that the cause of the problem? I get an IP address on the wired NETWORK adapter and the wireless network adapter...

  Suggestions that is very appreciated...

  I'll try to update the BIOS (I've updated everything)

  Oh and Yes... I am a technician experienced in IT (15 + years of professional experience) ;)

  See you soon!

  EDIT / /.
  The update of the BIOS nothing... was already v1.60...

  Thanks for the clarification!
  Good bye