Laptop HP 15-go99er: problem with network and WiFi

Similar Questions

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• Computer N5030 laptop Windows 7 starts only mode, safe mode with networking and I have no audio and Hifi. Help!

  I have a laptop N5030 Windows 7. I can only start my system in safe mode with network and I have no audio and Hifi.  Help!

  Hello. Maybe it's a software or a hardware failure, then run the diagnosis of ePSA on hardware. It is normal to have no audio in safe mode.

  I had a similar problem a few months ago due to the failure of one of my modules of RAM.

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• My HP laptop has had a problem with the uncontrollable from scrolling upward and to the left.

  Hoping someone can help me with this - for a month or if my computer hp laptop has had a problem with uncontrollable scroll upward and to the left. It is now getting worse and happens in all programs, including Word, Adobe, browsers, etc.. Even to type this message is difficult because the cursor periodically jumps to the top left corner of the text box. I tried to attach a new external mouse, but this is not enough. The problem occurs even when not to use the touchpad. I scanned my computer with several anti-virusprograms but no luck. It becomes difficult to use the computer for something else. Even now the down arrows / right does not help. PLEASE ADVISE!

   

   

  Original title: scrolling problem

  Hi Suresh,

  This is a late response to your question, but I thought that I could add more information here.

  From your description, it seems that your PageUp and the keys to the House (or arrows) of the keyboard are either stuck, or failing. These keys usually help access us in applications you mentioned. And since you mentioned that this happens even when the touchpad is not in use, it is likely that this could be the cause here.

  I suggest get you the checked keyboard when using a hardware technician, preferably from your computer manufacturer. That should help you understand better.

  Let us know if you need help with Windows, we are happy to be of assistance.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• Problem with congregate and synchronization of clocks

  I have connection problems of my laptop and desktop at a home group.  When I look at the clocks, the office is always a few seconds faster than the laptop and somewhere I read that the clocks must be synchronized for the home group to work.

  What's odd about all this, I just did a fresh install of Windows 7 on the laptop a few days ago group home worked fine for about a day, then he stopped.

  I tried to use the time Internet sync to synchronize the clocks on the desktop and laptop.  I used 4 servers of different times, but whenever the real-time is a couple of seconds between the office and cell phones.  Nothing I've tried will get them to sync.

  Any help that you could give to fix this problem would be greatly appreciated.

  Hi Profrock,

  First of all, try to run homegroup troubleshooter built into windows 7 and check if it helps solve the problem of residential group on your computer. Access the link below and follow the steps to run the troubleshooter in homegroup. http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  If the problem persists, you can try to start the computer in safe mode with network and check if you can access the homegroup. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  You can also try to temporarily disable the security software of the computer and check if you can access the homegroup. If you are able to access, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Also note that there is no case of residential group doesn't work not based on the clock.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• problems with Vista and msn

  my laptop had vista business on it originally, it crashed a year ago and the store put windows 7 Home Edition premium on it, last week I had to have my hard drive changed due to problems with it and computer scientist put my vista business back on it, I thought I was brilliant as always I like vista , the problem is now I can not MSN up on it it keeps saying IE he blocked, IE 9 will not download, I play Facebook games and many of them won't load properly, tried to install service pack 2 for vista and it goes on to say that I have to install service pack 1 in the first place , its already there and updated pack 2 but still will not download. Someone at - it answers or useful tips or advice they can give me to have an entirely new work laptop

  Yes 100% positive sp 1 is installed and updated, already tried all the links you have kindly posted, was trying to do it for 12 hrs before I posted this question, I have 64 bit but that he already knew who didn't need the computor to tell me, I finally returned to the it guy and he discovered that the lap top returned to the original IE 7 when the hard drive has changed it dosent msn so therefore all the problems, he finally put IE 9 for me and the two vista service packs and support now msn works finally done my f/b, so Happy Days

• is there a problem with vista and microsoft wifi?

  last week, I was on the internet with my router (belkin) wireless and all the sudden it stopped working. Only works in the same room. A computer in the shop and the tech claims that it was a matter of microsoft with vista and wifi. Is this true? She said I could either adjust the settings of the router with manfactur of the router or the upgrade to windows 7!

  Hello

  1. did you of recent changes on the computer?

  You can try to reset TCP/IP and Winsock.

  a. Click Start and type cmd in the start search box.

  b. in the list programs, right-click on cmd and select run as administrator.

  c. type netsh winsock reset at the command prompt and press the Enter key.

  d. do the same process to refresh the TCP/IP just replace the command typed with

  netsh interface ipv4 reset press enter

  netsh interface ipv6 reset press enter

  ipconfig/flushdns, press enter

  e. restart your computer.

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  You can also check the following items and see if it helps:

  In the Windows wireless network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• I have a problem with the active WiFi Seagate GoFlex TV Media Player asking for a net user ID and a password.

  Original title: Net User ID & Net password

  After the upgrade from Vista to W7-64 CV, I have a problem with an active WiFi Seagate GoFlex TV Media Player asking for a "Net User ID & Net password" to log.  I used all imaginable combinations of IDs & passwords, but they all lead to logon fails. I'm almost certain that it is a W7 security problem because others with the same players who went to W7 face the same problem.  I found many supposed fixes online, but none works.

  I am aware that MS W7 works as it should and Seagate is not their problem, but if anyone can recommend a change of security to help this issue, I guarantee a pass towards the sky.

  PS: All the sharing, etc. continuously.  are installed as they should be.

  The only reference to Net User ID and password I can find is on page 46/47 of the User Guide. If this is not the user name and password of the Windows account that you want to share files with, I don't know what it is.

  I guess patches that you tried to include those that are mentioned here:

  http://forums.Seagate.com/T5/FreeAgent-theater-and-GoFlexTV/logon-fail-home-network-Windows-7/TD-p/70540

  I would have suggested the registry change.

  It might be worth checking that you have the latest firmware, just in case.

  http://knowledge.Seagate.com/articles/en_US/FAQ/216931en?language=en_US

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you