El Capitan on the disc?

Similar Questions

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Playlist of the burns on the disc in the order reverses

  I'm oldskool... I always like the discs that I feel. So even if I download an album from Apple iTunes Music Store, I burn to disk, add it to my collection of physical disk, as well as my collection of digital discs that I keep to CDPedia.

  Now, something strange has happened, and I don't know if it's from El Capitan, or one of the latest versions of iTunes (I'm running the latest OSX 10.11.3 and the iTunes version is 12.3.2.35).

  So:

  1. I download a full album from iTunes Music Store.

  2. I get a 'album' in iTunes;

  3. I select all the tracks from the album, and then choose file > New > Playlist from selection.

  4. sometimes (and I don't know if it is compatible), the tracks end last firstly (so reverse order);

  5 if (4) is true, so I chose the Playlist edit and sort by track #; I definitely make sure the playlist is in the order I want.

  6 then I choose file > burn Playlist to disc, insert a blank CD, when required, etc.

  The last two times (today was with Philip Glass Koyaanisqatsi), immediately (during the initialization stage) I noticed the top of my iTunes that the CD would be burned in the opposite direction, although the reading list I wanted to burn was in good order. The first time, I continued and indeed: the CD that was in reverse order.

  So I chose to Edit Playlist again, made sure all of the tracks were in good order and tried to burn again. New order (initialization phase) and this time I stopped burning. The CD was unusable, but it was in reverse order.

  So finally I chose for a new playlist (empty!), dragged the individual tracks one by one to the new playlist, filled manually in the title, etc. and then repeat the burning process. This time everything was beautiful, as it should.

  Like I said: it's already happened, but this only happens to me? How (with the exception of manually build a play list). When can I I really rely on the playlist displayed onscreen, knowing that when I press "burn", it will be OK? I don't want to overturn three blank CD for every album, I want to burn.

  Thanks for your comments.

  It may be preferable if the burn list has the songs contained real order of the list, not a sorted order.  First of all, show playlist using the view of songs to show a simple with columns list (if it isn't already).  NOTE: The view control is at the right end of the horizontal bar; If it says currently Playlist, change it to songs.

  In the view of songs , you can sort the list by clicking on the header of the column you want to use for sorting.  To sort by part number, click on the header of the column follow-up of # .  To reverse the order, click it again.  The order of the list appears for the playlist, when you click on the header in the left column.  This column doesn't have any title in the title, and there the sequential numbers below.  The "pointer" in the heading (after clicking on it) must point upwards (click a second time to reverse).

  With the shown playlist in the order of the list, you can manually move the songs (top to bottom) on the list to get them in the desired order.  This is useful, for example, to create a "mix CD" with songs from different albums in the order you want.  Try to burn the CD with songs in the order desired, as shown by using the list command.

• Impossible to reinstall OS x El Capitan via the recovery

  10.11.2 OSX

  iMac 27 inch end of 2013

  3.5 GHz Intel Core i7

  NVIDIA GeForce GTX 775M 2048 MB

  DDR3 4 GB 1600 MHz

  My iMac is buggy since upgrade to 10.11. Some programs crash frequently, and just recently, the system began to be insensitive, that needs to be forced to withdraw from the machine. Usually, when the system crashes like this, the mouse moves, but he will be.

  Twice on startup until I received the No. or prohibitive symbol showing no disk or operating system is not found.

  So, I tried a system restore to reinstall El Capitan. Everything went fine until I select the disc to install to. Then the system stops responding again once, completely frozen and I can without restoring.

  So I tried a restore from Time Machine early in the day. I think that would help, but do it anyway. It did not help, the system is still buggy.

  I ran the disk first aid.

  Does anyone have any suggestions or ideas? What's wrong? Of fact need the operating system reinstalled? Why restoration is stalling?

  Thank you!

  I think that you have a failed disk drive.

  Screen of Mac OS X - grey or prohibitory sign appears during startup

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• I'm a download LR 3 since the disc on my mac mini for 2011

  If someone could help me get the LR3 installed on my mac mini, it would be fantastic. I have the disc and the serial number. I get an error code saying that this app is not a developer application recognized

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• has had to change the password; Unable to add music to the playlist; can't burn music on the disc.

  problems with iTunes.  Failed to add songs to the playlist. can't burn music on the disc; Message (wait 90 days for download purchases). another received message (unauthorized;  "I have not authorized and renewed). Did not help.

  I have 2 iPads, 1 iPhone and iPod touch, so I need iTunes to synchronize. I'd like a different music player.

  Hello

  The problems you describe can be caused by outdated software.

  Make sure that iTunes and OS X are up-to-date.

  On your open the App Store, and select updates from the menu.

  On your iOS devices, tap settings > general > software update

• Cannot eject the disc

  I use a Mac Pro mid-2010. I was burning a DVD and burning failed. Now, I can't eject the disc. It does not show in finder. How can I eject the disc?

  How to eject a defective DVD?

  How the disk by force ejecting

  < published by host >

• Can burn is no longer my music on a CD - RW with Windows I Tunes, error message says is no longer can read or write on the discs. Allows burning the same disc on a Mac, why?

  Why does my version of Windows of I Mac is more will allow me to burn music to a CD - RW, it keeps saying it can't read or write on the discs. Why? I had previously burned discs with I Tunes without any problem.

  This article may help:

  12 iTunes for Windows: If you have trouble burning a disc

  especially the last paragraph.

• Erase the disc, re - install OS

  I have an iMac with three partitions on the system disk. I want to erase the disc (including partitions) and re - install OSX. What is the best way to do it?

  Boot from the recovery partition - hold command-r immediately after pressing the power button.

  Here, you can wipe the drive and install the operating system for the network.

  Edit: This can install the version of the operating system provided with your mac; Then use the normal procedure to update.

• How to eject the disc from the drive superdrive usb?

  How to eject the disc from the drive superdrive usb?

  -Drag / drop the icon for the CD in your trash

  -Restart the computer and after the buzzer, press in and hold the left mouse button until the disc ejects.

  -Press on the button of your keyboard.

  -Click the eject button in the menu bar.

  -Press on COMMAND-E.

  -Open the Terminal app in your Applications/Utilities folder. copy and paste the following text:

  / usr/bin/drutil eject of

• Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the screen. How can I stop this?

  Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the Web page. How can I stop this?

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.