El servicio of only windows firewall is no to esta ejecutando, porque?

Similar Questions

• How to remove norton Firewall and only use Windows Firewall?

  When I start my computor it take 20-30 minutes to bring up the windows. and then it stops at each click of the mouse. We did almost everything.  His saysing two firewalls is on. try to use only windows firewall, but continuous norton wanting to use thiers.                 don't know how to get norton to stop.

  You really should post in this forum for assistance: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security

  That being said...

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. What is the full name of the installed Norton application (for example, Norton 360;) Norton Security Suite) and when your subscription expires?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. the computer is currently fully patched to Windows Update?

  ===================================================

  If the Norton application includes a firewall, you do not want to turn off (disable) the Windows Firewall. See http://support.microsoft.com/kb/283673

• Can not enter the Windows Firewall settings

  Hello

  Can someone tell me what my problem is? When I try to enter my WF in the Panel, he won t let me do that. A message just because of an unidentified problem, windows cannot display only my windows firewall settings.

  Because of the informative posting, I would say you should ask Microsoft why you aren't able to open the firewall settings.

  If you're ready for a serious debate please let us know which mode of laptop you have, which OS is preinstalled it and which antivir application you use.

  Good bye

• System refresh actualisations Microsoft Windows Firewall software with advanced opions not found

  Good evening

  When I ask the firewall with advanced fire windows I get the following response: failed to load the snap-snap-in windows firewall with advanced security code error 0xd9 options.

  Thanks for your insights.

  Best regards

  Guy PASCAL

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://support.Microsoft.com/common/international.aspx

• Ive found & removed a trojan virus, but now my Defender windows & firewall seem to have been deleted. How to make a comeback?

  When I try to start the center of windows security, said just can't be started. even with the Defender & firewall.

  Hello

  What operating system is installed on the computer?

  Method 1:

  See the link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  I suggest you to uninstall and reinstall Windows Defender and check if it helps:

  http://www.Microsoft.com/security/default.aspx

• Windows Firewall and Mcafee won't work?

  I have mcafee antivirus more and everything works on it except for the firewall, when I try to turn on it turns itself after 2 seconds. I tried to turn my windows firewall on and just says cannot change some parameters and then I went to advanced to the firewall settings windows and who says just snap-in failed to load error 0x6D9 code. My computer does not turn off, and it seems to work really slow and just do worse. I'm not sure what I'm supposed to do, but I read on a few other sites that it is a virus, but didn't know if I should trust the websites so I do not download anything. I hope someone can help me and I am ready to do whatever it takes because my computer is only a few years old. Help!

  This is the forum for anti-malware for Microsoft Security Essentials (MSE) program

  Because McAfee is your provider of anti-malware suggest seek you assistance from McAfee Support: http://service.mcafee.com/

  Kind regards...

• Ethernet and Windows Firewall

  Hello

  I need to know what Windows Firewall rules must be defined for TestStand/CVI see the ARP protocol. We see nothing, no ethernet traffic.

  I have a system (Army Gold Master 7, using TestStand and CVI) who has "standard" Government firewall rules We strive to communicate by Ethernet to specialized devices and we see no traffic unless disable us the firewall. We are not on the internet (not allowed by gov). The specialized devices send a broadcast request for IP but the software it never sees.

  I added (incoming and outgoing) rules to allow traffic to and from my application (CVI app that does a lot of TestStand active X calls). In the logs I saw something on cviproxy so I put rules to allow that. I've set allow rules for TestStand Runtime engine. I also disabled Windows defender.

  Any suggestions? BTW, we will not disable the firewall once it is deployed.

  Thank you

  Hey Joe,

  I did some checking, and generally, CVI does not implement itself - treatment rather ARP packet, it uses Windows built in functionality to receive ARP packets and assign IP addresses. ARP is contained in the Protocol Ethernet himself and is at a lower level than the concept of ports, so that Windows Firewall cannot directly block ARP packets.

  Your software CVI aims to process ARP packets in some way, or are you just wanting to communicate with devices via Ethernet? If it's the last, then the assignment of intellectual property should arrive outside the CVI and regarding the CVI you must only make sure that the correct port has been opened for communication with the specialized unit. This port number would be depends on the configuration of the device itself.

  When you disable the firewall and are able to communicate with the device, how is the appliance gets its IP address? For example, it is automatically assigned by Windows or your router (with DHCP) or it has a static IP address assigned to him? It is possible that the IP address is assigned, but given that the specific communication port is blocked by the firewall, the communication can occur.

  I hope this helps a little, and if you can give us the answers to these questions, we can provide I hope to better understand the situation.

• I can not start the Windows Firewall service in Windows XP SP3

  I discovered this problem when I installed a new Brother MFC-7860 DW in my network. Although the computer can 'see' the machine, I can't print to it. The error coming from the troubleshooter has informed me that the firewall might be the problem. Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  (1) you have a third-party security software installed?
  This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall

  (2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...

  If you have an antivirus up to date solution its definitions and do a full scan of the system...

  If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  And/or
  http://www.Malwarebytes.org/products/malwarebytes_pro/
  And/or
  http://www.simplysup.com/tremover/download.html (shareware)
  And/or
  http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
  And/or
  http://www.Kaspersky.com/free-virus-removal-tool

  If this also isn't that the problem may be that your firewall service is damaged...
  
  (3) open a command prompt run as administrator and type sfc/scannow

  (4) try to fix the firewall service
  Run the tool repair services by ESET
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe

  
  And/or
  Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
  (If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)

  And/or
  Open a command prompt using run as administrator
  and copy - paste these
  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  and press enter

  And/or
  Download this file and added to the registry by double clicking on it
  https://www.dropbox.com/s/ozezmcs3nktc2s0/windowsxp_firewall_fix.reg
  (5)guest orders (run as administrator), type Netsh firewall reset , and press "enter."

• wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall

  Hi all
  I hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.

  I lost my firewall, l, and network connections.  As advised I checked the status of the automatic Wireless Configuration.  The State was "arrested" and was not a solution for this.  I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing.   Now I can sign BT.openzone - it's the only way I can use the web.

  Also I can't start my Windows Firewall.  I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed.  I also brought my laptop (HP compaq nc4200-Xp) to my daughter.
  I don't have a recovery disc and the disc I have with drivers does not download.  I would be grateful for any resolution of this problem.    I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.
  Thank you very much
  Jacky

  Hi Jacky,

  Thank you for your response.

  I suggest you follow the steps in the link below.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: This also applies to Windows XP Service Pack 3.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• How can I get the windows firewall work

  My wife got a call from someone of 'Windows', she paid and downloaded two programs that did not, the damage has been catastophical, I ended up using my windows disk and reinstalled windows XP, but still a problem, that I could not access the windows firewall, it will not allow downloads, only very slowly. The message says: {WF settings cannot be displayed because the associated Service is not running. You want to start the windows Firewall/internet connection (ICS) Service} or not, if you say yes it says it cannot start

  E-mail address is removed from the privacy *.

  You are the victim of a very common scam. In addition to the money you paid, the prgrams that they installed were probably malware designed to collect and send personal information such as passwords, coordinated banking, credit card, etc. Review all information on your PC as a compromise.

  You should:

  1. tell your bank, etc (as applicable) of the credit card company what happened quickly.

  2. using another PC to your change all passwords quickly.

  3. you were common sense with the need to reinstall Windows because it's the ony way be sure & confident of getting a clean PC. However, make sure that do you a clean reinstall of Windows (involving a format your hard disks) rather than a repair reinstall.

  4. don't forget to consider all the drives (disks internal additional, external hard drives, USB thumb drives, etc.) as potentially infected if they were connected at the time or a moment any since. Unplug them until your PC is up and running with anti-malware real-time protection and a firewall work and then analyze them with a minimum of 2 reputable anti-malware programs (there is a degree of risk of reinfection in that).

  5 consider speaking to the police.

  See also:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft are not requested for calls.

• Windows Firewall - XP - sp2

  I can't turn on the (failed to start Service ICS) firewall in windows xp sp2 wrote his lack a file "svchost", but there are other services running

  using the same file. It was working until I installed Microsoft Security Essentals

  Requirements for the MSE claim to only have XP SP3 . In the absense of any built-in MSE third firewall really with the Windows Firewall to turn it on, if not already enabled. Time to upgrade to SP3.

  The system configuration required

  http://www.Microsoft.com/en-us/security_essentials/SystemRequirements.aspx

  Operating system: Genuine Windows XP Service Pack 3 (SP3). Windows Vista (gold, Service Pack 1 or Service Pack 2); Windows 7

  • For Windows XP, a PC with a CPU of 500 MHz or higher clock speed and 256 MB of RAM or higher.
  • For Windows Vista and Windows 7, a PC with a clock speed of 1.0 GHz or higher processor and 1 GB of RAM or higher.
  • Display VGA 800 × 600 or more.
  • 200 MB of available disk space.
  • An Internet connection is required for installation and to download the latest definitions of viruses and spyware for Microsoft Security Essentials.
  • Internet browser:
    • Windows Internet Explorer 6.0 or later.
    • Mozilla Firefox 2.0 or later.
  • Microsoft Security Essentials also supports Windows XP Mode in Windows 7. For more information, see system requirements for Windows XP Mode in Windows 7.
  • * Your PC must run genuine Windows to install Microsoft Security Essentials. Learn more about genuine Windows.

  Support for XP with Service Pack 2 ended on 10 July. 2010.

   

  I hope this helps.

• Cannot connect XBox Media Center PC. Telling me there are problems of connection or firewall issues. Check the windows firewall. I'm a noob to all the rest. Help!

  I checked the windows firewall. Only other thing I'm running is microsoft security essentials. I use At & t UVerse for cable and internet.

  I'm a noob to computer. Help!

  Hello

  · What is the exact error message that you receive with the error code as appropriate?

  You can try the steps listed in the links below and check if it helps: Configure the Windows Media Center Extender Firewall: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/firewall/winfirewall.mspx

  As he tried to connect your console Xbox 360 as a Media Center Extender, you receive the error message: 'Xbox 360 not found': http://support.microsoft.com/kb/911129