Element missing in Plugin schema question

Similar Questions

• Why the table in the output of MT complex waveform modulation FSK 255 elements missing?

  Hello! I posted my question in the LabVIEW forum but an application engineer suggested I post here. I'm new so any help would be appreciated

  I use this example FSK in LabVIEW (VI is attached). As it can be seen in the block diagram, the number of samples by specified symbol is 512. If I run 2 - FSK, I have 1 bit per symbol. So I if I have 128 bits, 128 symbols. and if I have 512 samples per symbol, I expect 65536 samples/elements in the complex waveform of the MT output modulation FSK. However, I get only 65281 elements in the table. There are 255 missing items.

  If I run 4 - FSK and have 128 bit or 64 symbols, I expect to 32768 in the table. But then again, I'm running out of 255 items and get 32513.

  Am I missing out on something? Have I misunderstood something? Thank you very much for your help.

  I get the same results as you!

  I Dove a little inside, and it seems that the code that generates the symbols, two layers down, which reports an explanation to this.

  If you open MT modulate FSK.vi, then mod_FSK modular Phases.vi discontinuous to generate in the discontinuous case of the structure of the case, you will see the following code.

  

  You can see that when Reset is set to True (the default) and the external-loop for is in his first race, the inner-loop for work (samples per symbol) / 2 + 1 times (in your case, this number is 512 / 2 + 1 = 257.) Subsequently, the inner-loop for runs with 512 for each outer loop for iteration. This means that the first round fail to 512-257 = 255 samples, which causes the total to 255 less samples.

  I don't know what is the motivation behind this design. As a test, you could connect in a constant False to Reset of the MT Terminal modulated FSK VI, which causes all the samples to generate.

  Hope that clarifies it.

• YouTube plays very good but not Facebook or other videos on the site, it says I'm missing a plugin?

  When I use Youtube videos play very well but on Facebook and some other sites, that the videos will not play. I just get a message indicating that a plugin is missing. Everything works fine on IE. I just download Mozilla last night.

  Hi Brandonacker, you probably need to install adobe flash player plugin for sites to display video content, which you can download from https://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin installer according to browsers)

• Can we deep link from another application to a single app with url schema question?

  Hello

  Is it possible to deep link to another application or browser to an exemplary application installed on the iPad via the URL schema?

  We have a customer who want to link their own app (nonDPS) an application to the only question that we have built for him.

  We have an Adobe Enterprise license.

  Cheers, Tony

  I thought about it - it's: custom-url: / / (for example com.publisher.magazine://) and it works

  Cheers, Tony

• Format.AIP PDF: missing the plugin through creative cloud

  Hello

  I just bought Adobe Creative Cloud and after recording a project on Adobe Illustrator CS6, I tried to open the program again an error message is coming, "Missing plugins required. PDF format.aip. »

  I checked the plugin folder and it's there, but I can't open Illustrator.  Other Adobe programs work, it's just Illustrator.

  Does anyone know how to solve this problem, so I can open Illustrator and get to work.  Thank you very much!

  Also, I have an iMac.  Thank you.

  -Phil

  This happens because of preferences corrupt the application created the first launch. Please use the uninstaller Illustrator to uninstall the software and do not forget to check the option to remove all preferences towards the end. Also delete everything left behind Adobe Illustrator files in/Applications/Adobe Illustrator CS6, and then reinstall.

  Kind regards

  Rémy

• XML schema questions

  Question 1:

  If I have a number to more than one relationship I want to display in more than one table.  Is there a simple way to link that?

  An example would be a car that use similar elements (seats, etc.).  I do not think that livecycle supports keys

  So the XML looks like

  < orderCatalog >

  < car >

  Auto1 < modelNumber > < / modelNumber >

  ... year, etc.

  < / automotive >

  < part >

  part1 < partNo > < / partNo >

  < / part >

  < joinAutoPart >

  Auto1 < modelNumber > < / modelNumber >

  part1 < partNo > < / partNo >

  < / joinAutoPart >

  < / orderCatalog >

  I want to report it to

  Subform pointing to joinAutoPart

  Header field pointing to the automobile (with name and model number)

  Table with information pointing to partNo (with partName and partNo and price)

  This way, I would have one table per car with all of the items listed

  Question 2:

  Drive to load a XML on the internet by pressing a button of loadXML does

  Question 3: no xml related

  Is there a way to save a link to a row in the table to a different line of table

  Using the example above, if I had several tables auto with several parties.  The user selects a part I add to a table of orders.

  I would like to highlight this field showing that they have ordered the part and gray on the button.

  However, if they remove the item from the order, I would like to add back without having to search all the fields in each table to find the part number.

  Q1 - Yes when XML is loaded into the form it goes in a node called xfa.datasets.data. You can also load your own in your own region, so it is not inconsistent with what the (highly recommended) form. There is a set of full of functions to deal with the dom or you can create an E4X object in javascript and use the E4X standard tools to manipulate.

  Q2 - depends on how build you. Case of failure, the SOAP call expire and you can not stop it and report accordingly. Then you can continue in the form without that data (if you allow).

  Paul

• Separator element in NOSE Plugin for Word problem

  Hello!
  
  I am facing a problem with separators of element of an XML tag name.
  
  The XML data is created using VO.writeXML (). That's why the XML tags come - < PoHeaderId > and not < PO_HEADER_ID >
  The schema file is the xml document. When this scheme is downloaded in Word, the list displays the element such as: Poheaderid. (Without ceiling spaces)
  
  It's not really readable, especially from a point of view of the customer.
  I was wondering if there is anyway I can get the item to show exactly what it is in the schema. The only solution I could think otherwise is rename the tag xml for all attributes in the VO by using custom properties. But that would require me to change the attributes of 300 or more. Is this really the best way?
  
  Thank you
  
  Mansi
  
  Published by: user649037 on October 24, 2008 11:05

  BEEP toolbar: tools | Options | USER INTERFACE | Original XML element name

• Said his timing, but he of not and said firefox depreciated and missing the plugin to play a youtube video on a Web site

  I use Firefox as my default browser on my android phone. I noticed that there are some favorite folders that are missing and never sync to my laptop. If I try to manually synchronize he says he does, but never, it updates and displays an error. Also when I go to sync settings it says that Firefox Sync amortized?

  Hi and thanks, I uninstalled firefox from my android phone and reinstalled and it seems to work fine now thanks

• Missing a plugin but when try to pick him up, he won't find it.

  I'm trying to run a discussion forum. Whenever I load the page, it says "a plugin is needed to display the content" when I click on that, he said to "Java Runtime Environment" when I click Next it is executed, it is said is not available and try the manual installation. When I try this, nothing works. I tried searching this plugin will not work. I was able to get on this chat site for months until I had java update about 3 weeks ago. What can I do to fix this?

  Your java plugin (TM) Platform SE 7 is not displayed in your system more details. You can check if it has become disabled (set to 'never activate')?

  Open the page modules using either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click on Plugins. Then scroll down to see if Java is there and if you find, try to replace "Always enable" or "prompt to activate."

• Bug in profile? "unresponsive plugin" Shockwave (/ questions/970014)

  I have the problem of shockwave plugin is not responding

  Just FYI I didn't not use firefox for a few days and spoke of trying these solutions, but it seems to work now - I suppose that someone somewhere has made an update which fixed things, so fingers crossed.
  Thank you all for your comments,

  J

• Provisioning of the TMS - the model schema question

  Hello

  I have read the deployment of TMSPE and tried to find the TMS Provisioning model for new Movi 4.4 schema, however, I could not find anything of cisco.com.

  Please help me where I can download the movi and schema of the model from the other end?

  Thank you

  Hello

  This model should be included in the bundle of jabber, when you download jabber 4.4.

  Sent by Cisco Support technique iPhone App

• LR plugin - the Question yes/no

  Hallo!

  I need a plugin with a message box which appears in some cases and warn the user that something could cause a problem. I want to ask if it is safe to continue or not and new measures on its decision to base...

  But how can I create a such YES/No.-messagebox and how I can save the answer in a variable? I have not found a sample in the SDK, or maybe I was only looking for the wrong keywords...

  See LrDialogs.confirm ().

• Adobe Elements 14 download and install question

  I am trying to download adobe trial version 14 items.  Download the file I have says it's corrupt.  also it will not install either.  Not true of course, I want to spend the money for the paid version.  What should I do?  my computer is running windows 10 and is 64-bit

  Try to download from here:

  It will run during the thirty day trial.

  Download Photoshop Elements | 10, 12, 14, 11, 13

  You want the 64-bit version.

• How to install the 3d element in legacy plugin?

  How to install plugins in sequels?

  See the VideoCopilot site: VIDEO COPILOT | After effects, Plug-ins, tutorials and stock footage for Post Production professional

• ScrollBar on the presentation of the workflow element missing

  I exported a flow of work of one of our servers of 4.1.1_733 build VCO to a new server build 5.1.1_2942. This particular workflow changes the values stored in a configuration item. When you run the workflow running on the 4.1.1 server, it displays a scroll bar on the right side of the presentation-it missing on the 5.1.1 window server, so you cannot access certain values. Anyone know what might be missing? I don't see a property within the WF to set anything for this. Thank you.

  I'll let Burke reproduce this test. As a work around you can add steps / groups in your presentation.

  To export a package, that you go in the package tab, click the icon to create a new package, change the package, add your workflow. Save the package, click the icon to export the package and attach it here.