Elements do not stay within the grid

Similar Questions

• Problem with passing parameters to an HTTPService on buttonclick within the grid

  I have a DataGrid where I use ItemRenderers to render components such as buttons n Images within the grid. Now, I need to pass parameters to an HTTPService on click of a button. If the button is directly on the form (not in the grid), is easy to call HTTPService. But given that the button is in a grid, it is not able to resolve the HTTPService and so I can't call the HTTPService on ' click on ' event of the button.

  I would like to know if anyone can help.

  You should probably use click = "outerDocument.myClickHandler ()" "

  The outerDocument allows you to access the methods outside of the rendering engine.

  If this post has answered your question or helped, please mark it as such.

• Satellite L300 - does not connect to the grid

  my daughter ran in front of me yesterday and ripped the power cable from the plug, and now the laptop does not connect to the grid. Is there a how to on how to disassemble the laptop so I can try to reattech the plug to the motherboard?

  Thank you

  Hi the horse stable,

  In general there is no technical manual which can be downloaded. These user manuals are not for the public, and I saw manual user on the official website of Toshiba.

  Which means you have to disassemble the laptop yourself or ask a maintainer approved assistance. You can also get new spare parts from these guys there, and they can help you address all of the issues of material. :)

• Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Hello

  Please go to the library Module, then click on the picture in the Menu bar and then click the stacking.

  From there please select expand all stack them.

  It should show all the images if they are virtual copies.

  Kind regards

  Tanuj

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

  Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

  Double click on the sequence imported into the location of the project.

• Element is not defined in the SESSION

  Anyone has an idea why a user of the site would get a message error "some element is not defined in the SESSION" and no one else? Whenever the user presses a page that calls a session variable from a previous page that has defined the variable, they get an error message of session. They get the same results with different browsers, IE and Firefox. ???

  The problem is solved itself. I don't know how. I scoured the user through a few test pages (which does not require a login) who comes to set a variable in session to text, and then on the next page shows the session variable. It has worked well. I thought: "maybe it has to do with the session during a connection.
  Then I put the test pages in a folder that requires a login and test pages worked. Then I had the user to access pages throwing error "undefined in session", after logging, and the error disappeared. I don't know what happened.

• RADIOV element is not defined in the FORM

  Hello
  I have this.
  I want to insert values such as blue, yellow or red
  in the field of database col_Radio.
  
  what I have to change to make it work?
  
  Thank you
  
  ERROR:
  
  RADIOV element is not defined in the FORM
  
  Exceptions
  
  15:53:22.022 - term Exception - in C:\CFusionMX7\wwwroot\ACT_inputcolor.cfm: line 10
  RADIOV element is not defined in the FORM.
  
  Note: line 10 is "#Trim (Form.RADIOV), #
  
  --------------------------------------------------------
  
  What I need to change to the radiov element to define or is this the only mistake?

  In other words, the FORM variable name must be identical to yourname of the field.

  When you submit your form, this
  

  Becomes
  #FORM.group1 #.

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• Site footer do not stay in the Center.

  Hey guys,.

  With this site... I say 'what! I was able to create nav - bars and all! You have helped me more than I could have hoped for! So, thank you all!

  I'll just have a little problem... Which I'm sure is very common... my footer is not stay in place in the middle... I mean, I know there are all these ways to fancy for a footer, etc... Yet, is it OK the way I... I do this by placing it in its own div, not with the container or the content div... He sit at the bottom of the page for my taste, while I can't seem to stay focused.

  (Note: it does, however, look perfectly centered on my 'Design' overview on Dreamweaver, but when I go to preview it in a browser, it sticks a little too left.)

  Below the following code HTML and CSS coding:

  The HTML Code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < link href = "css/global.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "css/textstyles.css" rel = "stylesheet" type = "text/css" / > "

  < / head >

  < body >

  < div class = 'wrapper' >

  < div class = "header" >

  < / div >

  < / div >

  < div class = "nav" >

  < ul >

  < li > < a href = "#" > Contact < /a > < /li >

  < li > < a href = "#" > Foundation < /a > < /li >

  < li > < a href = "#" > Photos < /a > < /li >

  < li > < a href = "#" > bands < /a > < /li >

  < li > < a href = "#" > home < /a > < /li >

  < /ul >

  < / div >

  < / div >

  < div class = "content" >

  < / div >

  < div class = "footer" >

  "< img src="images/images/footer_03.jpg "width ="825"height ="81"alt ="Footer"/ >

  < / div >

  < / body >

  < / html >

  CSS coding:

  @charset "UTF-8";

  / * CSS document * /.

  {body

  margin: 0;

  padding: 0;

  background-image: url (file:///H|/EXTRA%20RMIT%20FILES/Clarkefield%20Website%20Site/images/Clarkefield%20Fes tival%20Background.jpg)

  }

  . Header {}

  Width: 827px;

  height: 579px;

  left margin: auto;

  margin-right: auto;

  background-image: url (.. / images/Clarkefield%20Header.jpg);

  background-repeat: repeat no.;

  background-position: center;

  }

  . Wrapper {}

  Width: 827px;

  left margin: auto;

  margin-right: auto;

  }

  . NAV {}

  Width: 679px;

  height: 78px;

  left margin: auto;

  margin-right: auto;

  }

  . Happy {}

  Width: 827px;

  margin: auto;

  height: 750px;

  background-color: #225b6f;

  padding-bottom: 20px;

  }

  .footer {}

  margin left: 86px;

  margin-right: auto;

  float: none;

  }

  . NAV ul {}

  list-style-type: none;

  margin: 0;

  padding: 0;

  Width:100%;/*this it will be the entire width of the container * /.

  }

  .nav li {}

  float: left;

  margin: 3.5px.

  padding: 0px;

  }

  .nav li a {}

  display: block;

  do-family: Arial, Helvetica, without serif.

  do-size: 14px;

  text-decoration: none;

  text-align: center;

  Background: url (.. / images/button.gif) no - repeat top left;

  Width: 128px; / * Enter width here * /.

  height: 77px; / * Enter the height here * /.

  color: #FFF; / * Enter the color of the text here * /.

  }

  Sorry for all the hassle, it is an assignment of the University and I'm very worried about getting everything that fact .

  A big thank you, guys!

  -Joshua.
  

  Your footer is not in the #wraper on the one hand:

  
   
     

   
     

  see how you close the #wrapper div right after the #header.

  If you lose the balance #wrapper provides:

  . Wrapper {}

  Width: 827px;

  left margin: auto;

  margin-right: auto;

  }

  There is also an additional right after your div "nav":

  Home

  
    
    

  The second is extra... without closing anything.

  It is advisable when coding to put in to any element closing tag as soon as you have finished the opening tag.

  Thus, for example, put in your tag #wrapper opening and then put in the closing #wrapper tag before putting anything in #wrapper.

  Now if you use #wrapper in the normal way... it's to 'Pack' all the content... then everything... everything must be placed between the #wrapper opening tag and the closing #wrapper tag.

  Now you add content in the main envelope, all encompassing

  dash of each nesting level. So when you nest a deep level, indent the code to see what content inside that visually. Next level of nesting gets back once more.

  That practice, as well as to always add the closing tag a few lines below the opening tag at the same time the opening tag is created, you will help keep content in the appropriate container element and eliminate extra opening or closing... tags their locker always in pairs.

  Best wishes

  Adninjastrator

  PS: after trying to decypher the

  structure of another post, I would like to add one thing to 'always create '.

  Pairs of opening and closing tags. Add a comment just before the tag closing for you remember who

  you close... like this:

  Of course, it helps when problems later.

  Post edited by: adninjastrator... added more instructions

• Enqueue would be the elements are not recognized by the consumer.

  Hi people,

  I have a strange problem with a seeminly loop simple enough producer/consumer. The producer waits data acq, then the queue of data for display/logging purposes. The sampling frequency is once every 5seconds 4. The strange thing is that it works on and outside. I can't get it to operate properly.

  If I break on the Sub - VI of the queue, it breaks at regular intervals. However, the program will break once (at the beginning) on the queue and never more.

  The size of the queue is fixed (for testing), but I don't see a problem of excess (I tested with-1 and it 'still works"the same).

  Again this * sometimes * works exactly as it should, other times it doesn't. I tried to change the tunnels in consumers spending records, but that did not help. The left Preview queue at the bottom loop has been added, but it does not provide any insite, only return the name of the queue (correct) and zero element / pending. The output of elements seems to be uninitialized.

  Any thoughts on what could cause this?

  Best regards

  Jamie

  No need to build up your brain over away. Some things to note:

  -my method to 'disable' the consumer was invalid - I need to frame the "Dequeue" in a case statement to allow the 'Preview' catch elements.

  -After that I * still * didn't see the elements in the queue of my preview at the bottom left.

  Point number two led me to realize that the consumer was running ONCE because of a race condition on the Boolean of 'STOP '. It is set on "switch releasing", and although I take great care in re-init just before the exit, then re-init in a vi of initialization, he still did not catch it.

  It takes place on 5-6times consecutively now with smoothly. I really appreciate your help thank you!

  "Learned."

  Jamie

• my logo will not stay in the corner

  In the Loo Loo model will not stay my logo in the upper left corner.  When it is in the design phase, it is there, but when I saw it, he puts it as close to the middle in the middle of my background image.  Any advice?

  Hello

  Please make sure that logo is pinned at the top of the page to the left as shown in the screenshot below.

  

  Concerning

  Vivek

• Small Bug: Detection of people - O key does not return to the grid view

  Windows 7

  When I tap the O key, I will in face detection module.

  But when I hit the e key O once again, I do not return to the display of the grid.

  To do this, I have to click on this icon to return to the display of the grid.

  

  The grid view is always key G

• Footer do not stay at the bottom of the content

  I'm doing a new site - tomperkowitz.com - and the footer sticks at the bottom of the browser page, leaving a large white space when the browser window is greater than the content. I would like that the foot of stay at the bottom of the content (like the first image below) and do not stick to the bottom of the window (as shown in the second image below.

  I have another site - horizonshades.com - made with Muse where the rest footer as I want, but I don't know what I do different/wrong with this new site.

  Any help would be appreciated.

  

  

  You have unchecked Sticky Footer in the Page Properties?