elitbook HP 2740 Important Bios
I downloaded this player ' HP Notebook System BIOS update VERSION: F.04 "of your Web site and after this set.
The unit does not light
Then the machine was not able to open any interface
In this case, can someone help me
Send me a valid BIOS update file for two extension fd
If I want to sent to usb and start the update of the BIOS
THX
Please this is the big problem
I can't open the Bios or windows
I wann someone send me BIOS.fd
This disc sp67220.exe
cannot run & write on usb
Please read now if you can help me
Tags: HP Tablets
Similar Questions
-
Cannot enter BIOS on Win 7 HPE with American Megatrends BIOS
Although others have asked how to access the BIOS Setup interface, the answers have not solve my problem. so I write another similar question.
According to the subject line, I can't access the BIOS Setup interface during startup. My system runs Windows 7 HPE. The equipment includes an elite group of ECS motherboard that came with BIOS of American Megatrend chip version 4.6.5 and is dated 05/03/2012. I have never flashed or otherwise updating of the BIOS chip, but I could bring up the graphical user interface and change the options. I did quite recently in fact.
When I power fail system and/or entering the cycle of rebooting from the button start, the system stops and then begins to start and displays the start of American Megatrends screen. Press DEL repeatedly has no impact on the continuation of start-up. He proceeds as if the keyboard were not active and the system did not, therefore, the interruption of the keyboard... Because the splash screen also mentions F2 and F7, I tried these interruptions as well, nothing helps. The boot process has continued.
I searched the web until my fingers are simple bumps and can't find anything really useful. I read and reread mother ECS card manual without finding anything. I found a FAQ on the web page of American Megatrends, which addressed problems to access the BIOS with Win 8, which suggests that the change of power options would be effective. However, these referenced power options do not exist in my win 7 system HPE. Yes, Power Options are available from the Control Panel, but the individual options are not the same to win 8.
FWIW, I pulled all the hard disks internal power cables to see if I could access the BIOS interface. I was able to do so; However, without BONES, the keyboard is not active so no keyboard interrupts can be issued.
I would be grateful for any advice on how to influence of post-processing to slow down and make sure that any issue the keyboard interrupt is seen and followed.
Hello
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
By the description, I understand that the problem with you are not able to enter the BIOS American Megatrends BIOS setup.
I can understand the inconvenience that you have experienced and will try my best to help you.
In order to get more information about this, I suggest to visit the link below and check if that helps.
http://***.com/products/BIOS-UEFI-firmware/
Also, I suggest you to update the BIOS and check if that helps. Please visit the link below and check if that helps.
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-in/Windows/BIOS-FAQ#1TC=Windows-7
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Hello world
I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.I would be very grateful if you could help meHello
I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Let us know the results. We will be happy to help you further.
-
Question for Hiroto - css user
I redesigned the css for the Spanish and Portuguese CSA web site. I modified your css.
Here's what I came with:
Re: Style sheet for Japanese, Korean, Spanish and Portuguese CSA sites user
I have two questions:
(1) I want the 'P' in order to act as 'R' when the window is made narrower. See this web page. Make the windows smaller and larger to see 'P' and 'R' in action.
https://communities.Apple.com/pt/thread/4601
When I do the narrow window the letter P [issue] is scrolled off the right but the letter R [answer] does not work.
P's off to the left
P is visible
(2)
You remember what ASC Web page the effects of this code? I couldn't identify a use of this code.
What is "Community list table"? [jive now decides he wants to put a lot of spaces in this.] who know why]
/* ------------------ Treatment for narrow window Method 1 (minimum optimisation) Adjust community list table's shift and margin to maximize its width. */ /* v0.43 */ /* ------------------ (currently commented out) .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } ------------------ */ /* ------------------ Treatment for narrow window Method 2 (more beneficial to narrow window but has disadvantage for wide window) Let community list table have full width but not exceed 1019px to make room for sidebar ui (filters & actions). If window is wide enough (>=1265px), sidebar ui is displayed next to community list table, otherwise it is displayed below or above it (depending upon its document tree order). * sidebar width (constant) = 166px * community table max width = 1019px * canvas margin-left = 40px * canvas margin-right = 40px --------------------------------------- * total = 1265px */ /* v0.5 */ /* ------------------ (currently active) */ .j-layout-sl.j-browse-places .j-column-wrap-l { max-width: 1019px !important; } .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { padding-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } /* ------------------ */Hello
Well, it took me some time to investigate the new presentation of 2016-06 of the ASC (Japanese, etc). It's really annoying...
You can find my current project CSS below. For better maintainablility, I made new CSS file derived from the previous one for 2014-06 format. Section of the DISPLAY OF THE WIRE CONTENT has been significantly redesigned. It may contain useless residues of the previous, because I have not yet cleaned up seriously.
Moreover, the Q brand in question is placed in a strange way, using the negative zone offset (left:-60px banner), which would be the reason why it behaves well in your settings.
Relevant rules in original CSS:
.j-thread #body-apple .j-thread-post section.j-original-message h1 { max-width: 860px; margin: 0px auto 30px; /* <-- left margin is auto, which may be problematic in variable width environment */ } .j-thread .jive-content .j-thread-post section.j-original-message h1 .q-marker { position: absolute; top: 0px; left: -60px; /* <-- negative box offset for left side */ font-size: 55px; font-weight: 200; line-height: 1em; }which I adjusted it as follows:
.j-thread-post section.j-original-message h1 { max-width: inherit !important;; margin: 0px 60px 20px 60px !important;; } .j-original-message h1 .q-marker { left: -60px !important; font-size: 32px !important; }---
Here's my project. Please feel free to change, adapt, and reuse what you see fit.
/* custom styles for Apple Support Communities board system introduced in 2016-06 (v0.10d) written by Hiroto, 2016-06 */ @-moz-document domain(communities.apple.com), domain(discussionsjapan.apple.com), domain(discussionskorea.apple.com) { /* ------------------------------------------------------------------------------------------------ BODY */ body.j-body-welome, /* Welcome */ body.j-body-place, /* Community */ body.j-body-yourwork, /* Content */ body.j-body-home, /* Activity */ body.j-body-yourconnections, /* People */ body.j-body-preferences, /* Preferences */ body.jive-body-content, /* Thread */ body.jive-body-search, /* Search */ body.jive-view-profile /* Profile */ { background: white !important; } body { background: white; min-width: 0px !important; } #body-apple { width: 100% !important; min-width: 0px !important; } #globalheader { display: none !important; } #global-nav-wrapper {display: none !important; } #globalfooter, #globaldisclaimer { width: 80% !important; } /* ------------------------------------------------------------------------------------------------ TEXT */ body { /* NEW */ font-size: 16px !important; font-weight: 400 !important; line-height: 1.25 !important; } body * { /* NEW */ /* font-size: inherit !important; */ font-weight: inherit !important; line-height: inherit !important; } /* ------------------------------------------------------------------------------------------------ ASC HEADER, FOOTER AREA */ #j-header, #j-compact-header, #j-footer { width: 100% !important; } /* navigation header (Apple Support Communities ...) */ #j-header-wrap { padding: 0px 40px !important; margin: 0px 0px 15px !important; } #j-globalNav-bg { padding: 0pX !important; margin: 0px !important; width: auto !important; /* NEW */ } #j-satNav { overflow: visible !important; } #j-header-wrap { margin-bottom: 50px !important; } /* NEW */ #apple-full-header { margin: 10px 0px 0px !important; } /* NEW */ #second-row { /* NEW */ padding-top: 25px !important; height: 30px !important; } #jive-alert { /* NEW */ width: auto !important; max-width: inherit !important; margin: -20px 40px 10px !important; } .j-thread #jive-alert { /* NEW */ margin: -50px 40px 10px !important; } .jive-body-formpage.j-thread #jive-alert { /* NEW */ margin: -30px 40px 10px !important; } #jive-breadcrumb { /* NEW */ width: auto !important; margin-right: 40px !important; position: relative !important; } .j-js-footer-wrap { /* NEW */ width: auto !important; min-width: 0px !important; } footer#j-footer { /* NEW */ width: auto !important; min-width: 0px !important; } /* ------------------------------------------------------------------------------------------------ ASC TOP PAGE */ .j-body-welcome #jive-alert { margin: 0px 40px !important; } .j-body-welcome .hero-container img { width: auto !important; } .j-body-welcome.j-body-home [id|=jive-widgetframe] > .content-large { text-align: center !important; overflow-x: auto !important; overflow-y: hidden !important; } .apple-communities { display: inline-block !important; width: auto !important; text-align: left !important; } /* ------------------------------------------------------------------------------------------------ THREAD LIST BROWSER */ /* ------------------ community overview */ /* NEW */ .category-latest .category-latest-container .category-latest-row { margin: 0px !important; padding: 5px 0px !important; } .category-latest .category-latest-container .category-latest-row .discussion-metadata { margin: 5px 0px !important; } .category-latest .category-latest-container .category-latest-row .discussion-title a { font-size: 110% !important; font-weight: 500 !important; color: rgb(0, 136, 204) !important; } .category-latest .category-latest-container .category-latest-row:nth-child(odd) { background: rgb(247, 247, 247) !important; } .category-latest .category-latest-container .category-latest-row .read-full { display: none !important; } .apple-space-overview #body-apple .list-page .ask-a-question-sidebar { margin: 0px 70px 10px 0px !important; } .apple-space-overview #body-apple .list-page .ask-a-question-sidebar .ask-a-question-space-icon { width: 128px !important; height: 128px !important; } .apple-space-overview #body-apple .list-page .ask-a-question-wrapper .community-siblings { padding: 5px 0px !important; font-size: 20px !important; } /* ------------------ */ /* show author name in 'Latest activity' column in detailed list view of threads */ td.j-td-date > span { display : inherit !important; } /* main section */ #j-main { padding: 0px !important; } /* table cell title */ .jive-table td.jive-table-cell-title { padding: 5px !important; } /* thread list view column widths */ .j-browse-details .j-td-title { max-width: none !important; } .j-browse-details .j-td-date { width: auto !important; max-width: 20% !important; } /* ------------------ Hide Like and Bookmark columns in thread list view. */ /* ------------------ (currently commented out) .j-browse-details .j-td-likes, .j-browse-details .j-td-bookmarks { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th, .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th + th { display: table-cell !important; } ------------------ */ /* user name link */ .jive-username-link { text-transform: none !important; } /* threads list view table tr td */ .j-browse-details-tbody tr td { padding: 2px !important; } /* CHANGED */ /* threads list view left most icon */ .j-browse-details-tbody .j-td-icon { padding: 0px 6px 0px !important; } /* NEW */ /* communities list view table tr td */ .jive-communities-listing table tr td { padding: 5px !important; } /* thumbnails view width */ .j-browse-content .j-thumb-view, .j-browse-places .j-browse-thumbnails, .j-browse-people .j-browse-thumbnails { width: 100% !important; } /* thumbnail view list item margin */ .j-browse-content .j-thumb-view > li, .j-browse-places .j-browse-thumbnails > li { margin-right: 20px !important; } /* thumbnail view article font size */ /* NEW */ .j-thumb article { font-size: inherit !important; } /* thunbnail view article header height */ /* NEW */ .j-content-thumb header { height: 22px !important; } /* thumbnail view article height */ /* NEW */ .j-browse-content .j-content-thumb article { height: 120px !important; } /* thumbnail view footer */ /* NEW */ .j-browse-content .j-content-thumb.j-thumb footer { padding: 4px 0px 0px !important; } /* social actions row */ .apple-social-actions-wrapper { margin-right: 0px !important; } .j-thread .j-social-actions { margin-right: 40px !important; } /* apple header, subheader row ("Find helpful contents..." etc )*/ #apple-full-subheader, #apple-activity-subheader { padding: 0px 40px 15px !important; margin-bottom: 15px !important; } #apple-full-header h2, #apple-activity-header h2 { padding: 0px 40px !important; } /* page header */ .j-body-place #jive-body > header.j-page-header { margin-left: 40px !important; margin-right: 40px !important; width: auto !important; } /* pagenation */ /* NEW */ .j-pagination-prevnext > .j-pagination-prev, .j-pagination-prevnext > .j-pagination-next { font-size: 0px !important; } /* browser filter row */ #j-browse-filters { margin-bottom: 5px !important; } /* browser controls row */ .j-type-row { margin-bottom: 0px !important; } /* browser controls content types (All Contents|User Tips|Discussions) width */ #js-browse-controls .j-type-row .j-content-types { width: 90% !important; } /* browser controls view toggle (Thumbnails|Details) width */ #js-browse-controls #j-item-view-toggle { width: 10% !important; display: table !important; } /* content filter row (All|Open|Answered|Threads) */ .j-content-filter { background: white !important; margin-bottom: 10px !important; } /* container canvas */ .j-contained { margin-left: 40px !important; margin-right: 40px !important; } /* category filter bar */ .jive-content-filter { left: 0px !important; width: 80% !important; } .touchcarousel-wrapper { width: 100% !important; } .touchcarousel .tc-paging-container { width: 90% !important; } /* more search results available */ #j-more-search-results-available { padding: 10px !important; } /* misc */ .jive-widget { margin-bottom: 10px !important; } .j-column { margin-bottom: 10px !important; } /* ------------------ Treatment for narrow window Method 1 (minimum optimisation) Adjust thread list table's shift and margin to maximize its width. */ /* ------------------ (currently active) */ .j-layout-sl.j-browse-content .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-content .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-content .j-column-s { width: 166px !important; } /* ------------------ */ /* ------------------ Treatment for narrow window Method 2 (more beneficial to narrow window but has disadvantage for wide window) Let thread list table have full width but not exceed 1019px to make room for sidebar ui (filters & actions). If window is wide enough (>=1265px), sidebar ui is displayed next to thread list table, otherwise it is displayed below or above it (depending upon its document tree order). * sidebar width (constant) = 166px * thread table max width = 1019px * canvas margin-left = 40px * canvas margin-right = 40px --------------------------------------- * total = 1265px */ /* ------------------ (currently commented out) */ /* .j-layout-sl.j-browse-content .j-column-wrap-l { max-width: 1019px !important; } .j-layout-sl.j-browse-content .j-column-wrap-l { margin-left: 0px !important; } .j-layout-sl.j-browse-content .j-column-l { margin-left: 0px !important; } .j-layout-sl.j-browse-content .j-column-s { width: 166px !important; } */ /* ------------------ */ /* ------------------ Swap left-right positions of thread list table and sidebar ui (filters & actions) */ /* let thread list table float left */ .j-layout-sl.j-browse-content .j-column-wrap-l, .j-layout-sl.j-browse-places .j-column-wrap-l { float: left !important; } /* let sidebar ui float right */ .j-layout-sl.j-browse-content .j-column-s, .j-layout-sl.j-browse-places .j-column-s { float: right !important; } /* ------------------ */ /* ------------------ leader board */ /* .jive-widget.jive-box.j-rc5.jive-widget-leaderboardwidget */ /* .jive-widget-leaderboardwidget {display: none !important; } */ .jive-widget-leaderboardwidget { max-width: 1000px !important; } .jive-widget-leaderboardwidget .j-bigtab-nav .j-tabbar { padding-top: 10px !important; } .jive-widget-leaderboardwidget .jive-widget-topmembers.split-columns ul li { min-height: 0px !important; } .jive-widget-leaderboardwidget .top-member-username, .jive-widget-leaderboardwidget .top-member-username * { font-size: inherit !important; } .jive-widget-leaderboardwidget .user-level-points { font-size: 18px !important; margin: 14px 0px !important; width: 60px !important; height: 30px !important; padding: 8px 0px 0px !important; } .jive-widget-leaderboardwidget .top-member-profile-info > a { border-radius: 0% !important; width: 60px !important; height: 60px !important; } .jive-widget-leaderboardwidget .pagination-class { margin-top: 30px !important; } /* ------------------ */ /* article list .j-rc5 is used to identify this list e.g., https://discussions.apple.com/article/HT1939 */ .j-layout-sl.j-browse-content.j-rc5 #jive-body-maincol { margin: 0px 0px 0px 166px !important; } /* ------------------------------------------------------------------------------------------------ THREAD CONTENT BROWSER */ /* thread header */ .apple-thread-header { width: auto !important; margin-bottom: 10px !important; margin-left: 40px !important; } /* thread message */ /* NEW */ .j-thread .jive-content .j-thread-post .jive-rendered-content { font-size: inherit !important; } .j-thread #body-apple .jive-thread-messages h2.helpful-allreply, .j-thread #body-apple #helpful-container, .j-thread #body-apple .j-thread-post > header .j-post-author, .j-thread #body-apple .thread-container-wrapper, .j-thread #body-apple .all-replies-container, .j-thread #body-apple #j-main #jive-breadcrumb, .j-thread #body-apple .addReply, .j-thread #body-apple #jive-body-intro-content { max-width: inherit !important; margin: 10px 40px !important; } .j-inresponse-to { font-size: inherit !important; } .j-thread .jive-content .j-thread-post > header, .j-thread .jive-content .j-thread-post > h3.header { margin: 15px 0px 10px 0px !important; } /* thread original messeage (question) */ /* NEW */ .j-thread-post section.j-original-message { margin: 0px 30px !important; padding: 15px 10px !important; border-style: dotted !important; border-width: thin !important; background: none repeat scroll 0% 0% rgb(247, 247, 237) !important; } .j-thread-post section.j-original-message h1 { max-width: inherit !important;; margin: 0px 60px 20px 60px !important;; } .j-thread-post section.j-original-message .jive-rendered-content { max-width: inherit !important;; margin: 0px 25px !important;; } /* original poster profile header */ .j-thread .jive-content .j-thread-post > header.js-original-header { max-width: inherit !important; margin: 0px 40px !important; padding: 5px !important; } .j-thread-post section .thread-actions { max-width: inherit !important; margin: 0px 25px !important; } .j-original-message .jive-rendered-content p { font-size: inherit !important; } .meta-posted { max-width: inherit !important; margin: 10px 25px 20px !important; } /* Q mark */ .j-original-message h1 .q-marker { left: -60px !important; font-size: 32px !important; } /* answer rollup */ /* NEW */ .j-answer-rollup.span-full-width { background: none repeat scroll 0% 0% rgb(237, 247, 232) !important; padding-bottom: 10px !important; margin: 20px 0px 0px 0px !important; border: 1px solid rgb(45, 184, 71) !important; } .j-inline-correct-answer { padding: 0px !important; max-width: inherit !important; margin: 0px 10px !important; } .j-inline-correct-answer section { margin: 10px 0px !important; } /* A mark */ .j-inline-correct-answer .answer-marker { left: 0px !important; font-size: 32px !important; } /* persistent question shown at top */ /* NEW */ .persist-question.persist { display: none !important; } /* Solved and Helpful marker text */ /* NEW */ .j-thread-post header .j-correct-text, .j-thread-post h3.header .j-correct-text, .j-thread-post header .j-helpful-text, .j-thread-post h3.header .j-helpful-text { font-size: 22px !important; background: none repeat scroll 0% 0% transparent !important; border-style: none !important; margin: 0px !important; padding: 10px !important; } /* thread content */ .j-thread .jive-content { margin: 0px 10px 0px 10px !important; } /* CHANGED */ /* thread replies ul */ ul.jive-discussion-replies.jive-discussion-indent-0 { margin: 0px !important; } /* thread reply li */ .jive-discussion-replies li.reply { margin-top: 15px !important; } /* thread message border */ /* NEW */ .jive-discussion-replies li.reply .jive-thread-message { border-style: dotted !important; border-width: thin !important; } /* orgininal poster comment background */ /* NEW */ .original-poster-comment { background: none repeat scroll 0% 0% rgb(247, 247, 237) !important; top: 0px !important; right: 0px !important; bottom: 0px !important; left: 0px !important; } /* pagenation */ /* NEW */ .j-thread .jive-thread-messages .j-pagination { margin: 30px 0px !important; } /* promoted helpful answer and prompted recommended answer */ /* NEW */ .j-inline-promoted-helpful-answer, .j-inline-recommended-answer { background: none repeat scroll 0% 0% rgb(247, 232, 207) !important; padding: 15px 10px 5px 10px !important; margin: 0px 10px 15px 10px !important; border-style: dotted !important; border-width: thin !important; } .j-inline-promoted-helpful-answer p { margin: 0px !important; } .j-inline-promoted-helpful-answer header .reply-date, .j-inline-promoted-helpful-answer h3.header .reply-date, .j-inline-recommended-answer header .reply-date, .j-inline-recommended-answer h3.header .reply-date { font-size: inherit !important; margin: 10px 0px !important; } .j-inline-promoted-helpful-answer header .j-helpful-text, .j-inline-promoted-helpful-answer h3.header .j-helpful-text, .j-inline-recommended-answer header .j-helpful-text, .j-inline-recommended-answer h3.header .j-helpful-text { font-size: 22px !important; background: none repeat scroll 0% 0% transparent !important; border-style: none !important; margin: 0px !important; } .j-inline-promoted-helpful-answer section .reply-body, .j-inline-recommended-answer section .reply-body { font-size: inherit !important; margin-bottom: 20px !important; } .j-inline-promoted-helpful-answer section, .j-inline-recommended-answer section { padding: 0px 20px !important; } #helpful-container { padding-top: 0px !important; } #helpful-container hr { margin: 10px !important; } #helpful-container .more-answers { margin: 0px !important; } #helpful-container .more-answers * { font-size: 24px !important; } /* inline correct answer, helpful answer background */ /* NEW */ div[itemprop="acceptedAnswer"] { background: none repeat scroll 0% 0% rgb(237, 247, 232) !important; } .j-thread .jive-content.j-helpful, .j-thread .jive-content.j-helpful.j-op { background: none repeat scroll 0% 0% rgb(247, 232, 207) !important; } /* switch between 'hellpful replies only' and 'all replies' */ /* NEW */ .jive-thread-messages .helpful-all-switch * { font-size: 24px !important; } .jive-thread-messages .helpful-all-switch li.inactive { padding: 0px !important; top: 32px !important; } .jive-thread-messages .helpful-all-switch li.inactive span.menu { width: auto !important; min-width: 160px !important; padding: 5px !important; text-align: center !important; } /* thread content footer profile */ /* NEW */ .j-thread-post section.j-original-message footer .footer-profile { margin-right: 10px !important; } .j-thread-post footer .footer-profile { margin-right: -10px !important; } .j-thread-post footer .footer-profile .j-status-level { padding: 0px 10px 0px 0px !important; } .j-thread-post footer .footer-profile .username, .j-thread-post footer .footer-profile .jive-username-link { padding: 0px 10px 0px 10px !important; } .j-inline-correct-answer footer .footer-profile .j-status-levels, .j-inline-promoted-helpful-answer footer .footer-profile .j-status-levels, .j-inline-recommended-answer footer .footer-profile .j-status-levels { padding: 0px 10px 0px 0px !important; } .j-inline-correct-answer footer .footer-profile .username, .j-inline-promoted-helpful-answer footer .footer-profile .username, .j-inline-recommended-answer footer .footer-profile .username { padding: 0px 10px 0px 10px !important; } /* text wrap in header */ .j-thread-post > header .j-post-author { white-space: normal !important; } /* thread post section (message body) */ .j-thread-post section { padding: 0px 20px !important; margin-bottom: 6px !important; } /* thread rendered content */ .jive-rendered-content { padding-bottom: 4px !important; } /* thread rendered content quote & pre */ .jive-rendered-content .jive-quote, .jive-rendered-content .jive-pre { margin: 5px 15px !important; } /* thread reply footer (Return to Community | Go to original post) */ #jive-thread-reply-footer { margin-top: 10px !important; } /* more like this links, incomming links */ #apple-related-threads { margin: 0px 40px !important; } #apple-related-threads .j-box { margin-bottom: 0px !important; } .j-icon-list li { padding: 3px 0px 3px 22px !important; } /* related articles */ .apple-sidebar-property { width: auto !important; padding-left: 0px !important; } .jive-box-body.jive-sidebar-body.jive-sidebar-body-related-articles { padding: 15px 0px !important; } /* ------------------ staus level, expertise, level points */ /* status level expertise tile */ .j-status-level.expertise-tile, .status-tile.expertise-tile { display: none !important; } /* status level level points */ .j-status-level .level-points span { display: inherit !important; } .j-status-level .level-points { white-space: inherit !important; } /* ------------------ */ /* ------------------------------------------------------------------------------------------------ INLINE EDITOR */ /* editor */ .jive-discussion-replies li.addReply { margin: 50px 40px 0px !important; } /* ------------------------------------------------------------------------------------------------ ADVANCED EDITOR */ /* content area */ .j-thread.jive-body-formpage #body-apple .j-form { max-width: inherit !important; margin: 0px auto 20px !important; width: inherit !important; } .j-thread .jive-content.jive-create-thread, .jive-body-formpage-document .jive-content.doc-page { margin: 0px 40px !important; padding: 0px !important; } /* editor panel */ .j-thread .jive-content.jive-create-thread #jive-compose-title, .j-thread .jive-content.jive-create-thread .jive-editor-panel.jive-large-editor-panel, .jive-body-formpage-document .jive-content.doc-page #jive-compose-title, .jive-body-formpage-document .jive-content.doc-page .jive-editor-panel.jive-large-editor-panel { margin: 0px !important; } /* line height in editor */ body.tiny_mce_content { line-height: inherit !important; } /* replying to */ p.jive-replying-to { padding: 20px 0px !important; } .jive-body-formpage-comment .jive-thread-message { margin: 0px 40px 0px 80px !important; } /* reply to avatar */ .j-thread-post header .j-post-avatar { position: absolute !important; top: 0px !important; left: -50px !important; width: auto !important; } /* buttons (Reply|Cancel) */ .j-publishbar, .jive-body-formpage .jive-composebuttons { margin: 20px 40px 0px !important; } /* ------------------------------------------------------------------------------------------------ ACTIVITY STREAM */ /* activity entry */ .j-act-entry { padding: 5px 0px 10px 100px !important; } /* activity title */ .j-body-home .j-act-title { padding: 5px 0px 5px 24px !important; } /* activity body & comment */ .j-body-home .j-act-init { padding: 5px 0px 10px 100px !important; } .apple-activity-comments-wrapper { margin-left: 0px !important; } /* Like list */ .j-act-grouped .j-act-g-item { padding: 3px !important; } /* ------------------------------------------------------------------------------------------------ SEARCH RESULTS */ /* search result entry */ .j-search-results-main-container .j-search-result { padding: 10px !important; } /* ------------------------------------------------------------------------------------------------ DOC (USER TIP) */ /* user tip canvas */ .jive-body-content.j-doc .j-column-wrap-l { margin: 0px 40px !important; } .j-doc .jive-content { /* NEW */ margin: 0px !important; padding: 10px !important; border: thin dotted !important; } /* ------------------------------------------------------------------------------------------------ PROFILE */ /* header & navigation bar (Bio|Activity|Content|Communities) */ .j-view-profile .j-page-header { padding: 10px 40px !important; } .j-bigtab-nav { margin: 10px 40px !important; } /* Bio */ .j-layout-l .j-column-wrap-l { width: 100% !important; } /* Communities (places) sidebar ui blue marker adjustment (according to the sidebar width changed to 166px from 180px for selector: .j-layout-sl.j-browse-places .j-column-s in PLACES section) */ .j-view-profile .j-second-nav ul > li.active { width: 156px !important; } /* ------------------ profile specialties and awards */ /* profile status container for specialties and awards */ .jive-view-profile .profile-status-container { display: none !important; } /* REFINED */ /* profile modal note status row for specialties and awards */ .status-row { display: none !important; } /* ------------------ */ /* ------------------------------------------------------------------------------------------------ PLACES */ /* latest activity column */ .j-browse-details .j-td-activity { max-width: 650px !important; } /* ------------------ Treatment for narrow window Method 1 (minimum optimisation) Adjust community list table's shift and margin to maximize its width. */ /* ------------------ (currently active) */ .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-places .j-column-l { padding-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } /* ------------------ */ /* ------------------ Treatment for narrow window Method 2 (more beneficial to narrow window but has disadvantage for wide window) Let community list table have full width but not exceed 1019px to make room for sidebar ui (filters & actions). If window is wide enough (>=1265px), sidebar ui is displayed next to community list table, otherwise it is displayed below or above it (depending upon its document tree order). * sidebar width (constant) = 166px * community table max width = 1019px * canvas margin-left = 40px * canvas margin-right = 40px --------------------------------------- * total = 1265px */ /* ------------------ (currently commented out) */ /* .j-layout-sl.j-browse-places .j-column-wrap-l { max-width: 1019px !important; } .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { padding-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } */ /* ------------------ */ }Good luck
H
-
Beta test of the new CSA user stylesheet
Don't like the appearance of ASC? Change it.
I added these changes to what appears in my thing. Your trials and your comments are appreciated. This article explains how to add the css to your browser. I use Firefox.
Adjust the format and presentation of the ASC Web Pages
Version 0.64
-Left corner with the right header information
-Remove excessive white space in the header
-Remove the redundant wording in the header
-Change two vertical to horizontal nav bars
-Purge footer bombblast
-Spanish and Portuguese support forums
-Support tag decorator
/* Custom Cascading Style Sheet for Apple Support Communities board system introduced in 2014-06 Copyright 2014, 2016 Hiroto, et. al. GNU General Public License This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. For a copy of the GNU General Public License see <http://www.gnu.org/licenses/>. For more information on what the css does, see: https://discussions.apple.com/docs/DOC-7501 Change Log Version 0.6: -- Fold versions 0.43 and 0.50 into this version. -- Add GNU General Public License -- Add media tag to select on screen size. -- Scroll large code listings -- Change color highlights unread posts -- Fix size of thread content display. Version 0.61: -- Narrow text for printing listing of this file -- Delete "added in" comments about versioning. Seems obvious to me without. -- More fixing of width of content display size of large window. -- Delete @-moz-document special case adjustment for max-width -- Size adjust for thread content and reply for large screens -- Reduce the amount of duplicate code Version 0.62 -- avoid userstyles.org/ error messages -- pacify ASC badges for those who want to enable the code [ Note: Some badges are turned off in 0.63 ] https://discussions.apple.com/message/30002950#30002950 ------> How to get rid of discussion list Badges Lines 115 to 146 <---- Go down find this line of code .j-status-level.expertise-tile { display: none !important; } You need to eliminate the slash / star * before the line of code and the star * slash / after the line of code. To get rid of all badges everywhere, uncomment the next three lines of code. Version 0.63 -- Decided on a minimalist philosophy to focus on reading the posts. -- Don't display badges on list of discussion posts -- Footers should be short not take up a half a page. Uncomment the three lines of code to accomplish this after the "Rambling footer stuff will strink". Note some bombblast will remain, see adjustment at the end of the sheet. #globaldisclaimer.sosumi {display: none !important; } #j-footer #breadcrumbs {display: none !important; } p.gf-buy {display: none !important; } -- Show points on the profile popup! Version 0.64 -- Align left with right side header info -- Delete excessive white space in header -- Delete redundant wording in header -- Change two vertical nav bars to horizontal -- Purge footer bombblast -- Support Spanish and Portuguese forums -- Support decorator option on the url */ /* Spanish https://communities.apple.com/es/docs/DOC-1004 Português https://communities.apple.com/pt/welcome */ @-moz-document domain(discussions.apple.com), domain(communities.apple.com), domain(discussionsjapan.apple.com), domain(discussionskorea.apple.com) { /* Common css for small and large windows */ /* Scroll code listings. set max-height of syntax highlighted code in thread content browser v0.6 */ .jive-rendered-content .dp-highlighter { max-height: 500px !important; overflow: auto !important; } /* Scroll code listings. set max-heiht of pre code (visible when javascript is disabled) v0.6 */ .jive-rendered-content pre { max-height: 500px !important; overflow: auto !important; } /* highlights in dark blue unread posts when logged in. v0.6 All your posts https://discussions.apple.com/content?filterID=participated~objecttype~objecttype[thread] Discussions you authored https://discussions.apple.com/content?filterID=contentstatus[published]~objecttype~objecttype[thread] To see the discussions you have read and not read in a community The suffix to use for any ASC forum, placed after the basic link to any forum, it's /content?filterID=contentstatus[published]~objecttype~objecttype[thread] for iPhone community this would be: https://discussions.apple.com/community/iphone/using_iphone/content?filterID=contentstatus[published]~objecttype~objecttype[thread] */ .j-td-title strong {color:#191970 !important; font-weight: normal !important;} /* added or changed in 0.63 'til 0.64 insertion point */ /* Avoid double scrolling in posts which happened here: https://discussions.apple.com/docs/DOC-9254 #globalfooter and #globaldisclaimer elements which originally define the width to fixed value as 980px 0.62 */ #globalfooter, #globaldisclaimer { width: 80% !important; } /* Get more vertical space. This line gets rid of the global Apple navigation bar at the top. The black bar with Apple-Logo Mac iPad iPhone Watcsh Tv Music Support */ #global-nav-wrapper {display: none !important; } /* Pacify badges These four lines, when uncommented, eliminate the display of badges. Some or all of the lines are commend out. Each comment starts all the way to the left. */ /* ------------------------------------------------------------------------------- THREAD CONTENT BROWSER status level expertise badge To avoid formatting problems of badges overlapping next post, enable this line. */ .j-status-level.expertise-tile { display: none !important; } /* --------------------------------------------------------------------------------- THREAD LIST BROWSER leader board */ .jive-widget-leaderboardwidget {display: none !important; } /* --------------------------------------------------------------------------------- PROFILE profile status container for specialties and awards */ /* .profile-status-container { display: none !important; } */ /* profile modal note status row for specialties and awardds */ /* .status-row { display: none !important; } */ /* Rambling footer stuff will sink */ /* no more legalistic bomblast */ #globaldisclaimer.sosumi {display: none !important; } /* Not a complete path to here, so why be mislead */ #j-footer #breadcrumbs {display: none !important; } /* Guess by now folks know how to buy an apple product */ p.gf-buy {display: none !important; } /* Reveal points in popup when you click on an ASC id or aviator. thanks to turingtest2. https://discussions.apple.com/message/30179703#30179703 */ .level-points > span {display: inherit !important;} /* Display point information */ /* 0.64 insertion point */ /* Use less space on the top of the page. We see this every day. I don't use any of the links here anyway. Ok, to make them smaller. The goal is not to have to do a "manditory" page down to get to posts. 0.64 */ /* Move up the "New My Subscriptions ..." nav bar. Looks better aligned with "Apple Support Communities" */ #j-globalNav { margin-top: -12px !important;} /* need less height for "Apple Support Communities New My Subscriptions ... " after moving up the nav bar*/ #j-globalNav-bg { height: 20px !important; border-bottom: none !important; } /* Less space below avator ... */ #j-header-wrap { margin-bottom: 0px !important;} /* move up "Apple Support Communities / Content" When windows size is contracted, these words will overlay words to the left. "... | logout" First nav bar doesn't overlay "Apple Support Community". ,,,*/ #jive-breadcrumb { margin-top: -10px !important; margin-bottom: 0px !important; right: 40px !important; } /* Less space above "All Content User Tips Discussions" nav bar */ .j-layout { margin-top: 10px !important;} /* Purge the words "Find helpful content and discussions." Redundant. Why are we here? Pro users will know. */ #apple-full-subheader {display: none !important;} /* Adjust the h2 header to take up less room on the page. Let's focus on the posts. */ h1, h2 { font-size: 24px !important;; line-height: 28px !important;; } .j-page-header { margin-top: 0px !important; margin-bottom: 0px !important; } /* Combine duplicate code here. v 0.61 */ /* --------------------------------------------------------------------------------- BODY */ body.j-body-welome, /* Welcome */ body.j-body-place, /* Community */ body.j-body-yourwork, /* Content */ body.j-body-home, /* Activity */ body.j-body-yourconnections, /* People */ body.j-body-preferences, /* Preferences */ body.jive-body-content, /* Thread */ body.jive-body-search, /* Search */ body.jive-view-profile /* Profile */ { /* v0.43 */ background: white !important; /* Effectively overrides most of the body color. These are more specific. */ } /* --------------------------------------------------------------------------------- TEXT */ /* line spacing */ .jive-content { line-height: 1.25 !important; } /* --------------------------------------------------------------------------------- ASC HEADER AREA */ #j-header, #j-compact-header, #j-footer { width: 100% !important; } /* navigation header (Apple Support Communities ...) */ #j-header-wrap { padding: 0px 40px !important; margin: 0px 0px 15px !important; } #j-globalNav-bg { padding: 0pX !important; margin: 0px !important; } #j-satNav { overflow: visible !important; } /* --------------------------------------------------------------------------------- THREAD LIST BROWSER - list of discussions in a Community */ /* show author name in 'Latest activity' column in detailed list view of threads */ td.j-td-date > span { display : inherit !important; } /* main section */ #j-main { padding: 0px !important; } /* table cell title */ .jive-table td.jive-table-cell-title { padding: 5px !important; } /* thread list view column widths */ /* v0.43 */ .j-browse-details .j-td-title { max-width: none !important; } .j-browse-details .j-td-date { width: auto !important; max-width: 20% !important; } /* threads list view table tr td */ .j-browse-details-tbody tr td { padding: 5px !important; } /* communities list view table tr td */ .jive-communities-listing table tr td { padding: 5px !important; } /* thumbnails view width */ .j-browse-content .j-thumb-view, .j-browse-places .j-browse-thumbnails, .j-browse-people .j-browse-thumbnails { width: 100% !important; } /* thumbnail view list item margin */ /* v0.43 */ .j-browse-content .j-thumb-view > li, .j-browse-places .j-browse-thumbnails > li { margin-right: 20px !important; } /* social actions row */ .apple-social-actions-wrapper { margin-right: 0px !important; } .j-thread .j-social-actions { margin-right: 40px !important; } /* apple header, subheader row ("Find helpful contents..." etc ) fixed in v0.43 */ #apple-full-subheader, #apple-activity-subheader { padding: 0px 40px 15px !important; margin-bottom: 15px !important; } #apple-full-header h2, #apple-activity-header h2 { padding: 0px 40px !important; } /* page header */ .j-body-place #jive-body > header.j-page-header { margin-left: 40px !important; margin-right: 40px !important; width: auto !important; } /* browser filter row */ #j-browse-filters { margin-bottom: 5px !important; } /* browser controls row */ .j-type-row { margin-bottom: 0px !important; } /* browser controls content types (All Contents|User Tips|Discussions) width */ #js-browse-controls .j-type-row .j-content-types { width: 90% !important; } /* browser controls view toggle (Thumbnails|Details) width */ #js-browse-controls #j-item-view-toggle { width: 10% !important; display: table !important; } /* content filter row (All|Open|Answered|Threads) */ .j-content-filter { background: white !important; margin-bottom: 10px !important; } /* container canvas */ .j-contained { margin-left: 40px !important; margin-right: 40px !important; } /* category filter bar */ .jive-content-filter { left: 0px !important; width: 80% !important; } .touchcarousel-wrapper { width: 100% !important; } .touchcarousel .tc-paging-container { width: 90% !important; } /* v0.41 */ /* more search results available */ #j-more-search-results-available { padding: 10px !important; } /* misc */ .jive-widget { margin-bottom: 10px !important; } .j-column { margin-bottom: 10px !important; } /* --------------------------------------------------------------------------------- THREAD CONTENT BROWSER - Displays the contents of the posts. */ /* thread header */ .apple-thread-header { width: auto !important; /* v0.6 no more*/ margin-bottom: 10px !important; margin-left: 40px !important; } /* thread original post */ .j-thread .jive-content { margin: 0px 40px 0px 140px !important; } /* thread replies ul */ ul.jive-discussion-replies.jive-discussion-indent-0 { margin: 0px !important; } /* thread reply li */ .jive-discussion-replies li.reply { margin-top: 15px !important; } /* thread view indent */ .jive-discussion-indent-1 li.reply { padding-left: 15px !important; } /* thread info */ .jive-thread-info { padding: 10px 40px !important; margin: 0px !important; } /* thread answer rollup */ .j-answer-rollup { margin: 30px 0px !important; } /* thread post header (poster, date, response to) */ .j-thread-post > header { padding: 10px 20px 0px 20px !important; margin-bottom: 12px !important; } /* thread post section (message body) */ .j-thread-post section { padding: 0px 20px !important; margin-bottom: 6px !important; } /* thread post footer (Like|Reply etc) */ .j-thread-post footer { padding: 0px 15px !important; } .j-thread-post footer > ul { padding: 2px !important; } .j-thread-post footer > .acclaim-container { margin: 5px 0px !important; } /* thread rendered content. The text in the orginal post and replies. */ .jive-rendered-content { padding-bottom: 4px !important; } /* thread rendered content quote & pre */ .jive-rendered-content .jive-quote, .jive-rendered-content .jive-pre { margin: 5px 15px !important; } /* thread reply footer (Return to Community|Go to original post) */ #jive-thread-reply-footer { margin-top: 10px !important; } /* more like this links, incoming links */ #apple-related-threads { margin: 0px 40px !important; } #apple-related-threads .j-box { margin-bottom: 0px !important; } .j-icon-list li { padding: 3px 0px 3px 22px !important; } /* --------------------------------------------------------------------------------- INLINE EDITOR */ /* editor */ .jive-discussion-replies li.addReply { margin: 50px 40px 0px !important; } /* --------------------------------------------------------------------------------- ADVANCED EDITOR */ /* content area */ .j-thread .jive-content.jive-create-thread, .jive-body-formpage-document .jive-content.doc-page { margin: 0px 40px !important; padding: 0px !important; } /* header */ .j-thread .jive-content.jive-create-thread h2, .jive-body-formpage-document .jive-content.doc-page h2 { padding: 0px !important; } /* editor panel */ .j-thread .jive-content.jive-create-thread #jive-compose-title, .j-thread .jive-content.jive-create-thread .jive-editor-panel.jive-large-editor-panel, .jive-body-formpage-document .jive-content.doc-page #jive-compose-title, .jive-body-formpage-document .jive-content.doc-page .jive-editor-panel.jive-large-editor-panel { margin: 0px !important; } /* line height in editor */ body.tiny_mce_content { line-height: inherit !important; } /* replying to */ .jive-body-formpage-comment .jive-thread-message { margin: 0px !important; } /* buttons (Reply|Cancel) */ .j-publishbar, .jive-body-formpage .jive-composebuttons { margin: 20px 40px 0px !important; } /* --------------------------------------------------------------------------------- SEARCH RESULTS */ /* search result entry */ .j-search-results-main-container .j-search-result { padding: 10px !important; } /* v0.43 */ /* --------------------------------------------------------------------------------- DOC (USER TIP) */ /* v0.43 */ /* user tip canvas */ .jive-body-content.j-doc .j-column-wrap-l { margin: 0px 40px !important; } /* --------------------------------------------------------------------------------- PROFILE */ /* v0.43 */ /* header & navigation bar (Bio|Activity|Content|Communities) */ .j-view-profile .j-page-header { padding: 10px 40px !important; } .j-bigtab-nav { margin: 10px 40px !important; } /* Bio */ .j-layout-l .j-column-wrap-l { width: 100% !important; } /* Communities (places) sidebar ui blue marker adjustment (according to the sidebar width changed to 166px from 180px for selector: .j-layout-sl.j-browse-places .j-column-s in PLACES section) */ .j-view-profile .j-second-nav ul > li.active { width: 156px !important; } /* Wide screen browser =================== This rule set will be fine for normal to wide window whose width is ca. 1265px or greater. However, it will not be beneficial to very narrow window of 700-900px in width. */ @media all and (min-width: 1265px) { /* v0.6 */ /* --------------------------------------------------------------------------------- BODY */ body { background: white; min-width: 0px !important; } #body-apple { width: 100% !important; min-width: 0px !important; } /* --------------------------------------------------------------------------------- ASC TOP PAGE */ #jive-widgetframe-body_5780758 > .content-large, /* discussions.apple.com */ #jive-widgetframe-body_188974 > .content-large, /* discussionsjapan.apple.com */ /* v0.42 */ #jive-widgetframe-body_20835 > .content-large /* discussionskorea.apple.com */ /* v0.42 */ { /* added parent id in v0.41 */ text-align: center !important; overflow-x: auto !important; overflow-y: hidden !important; } .apple-communities { display: inline-block !important; width: 1120px !important; text-align: left !important; } /* --------------------------------------------------------------------------------- THREAD LIST BROWSER - list of discussions in a Community */ /* ------------------ When uncommented, hide Like and Bookmark columns in thread list view. */ /* v0.43 (optional) */ /* ~~~~~~~~~~~~~~~~~~~~ (currently commented out) ~~~> .j-browse-details .j-td-likes, .j-browse-details .j-td-bookmarks { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th, .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th + th { display: table-cell !important; } <~~~~~~~~~~~~~~~~~~~~ */ /* ------------------ Treatment for narrow window Method 1 (minimum optimization) Adjust thread list table's shift and margin to maximize its width. */ /* v0.43 */ .j-layout-sl.j-browse-content .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-content .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-content .j-column-s { width: 166px !important; } /* ------------------ */ /* ------------------ Swap left-right positions of thread list table and sidebar ui (filters & actions) */ /* fixed in v0.43 */ /* let thread list table float left */ .j-layout-sl.j-browse-content .j-column-wrap-l, .j-layout-sl.j-browse-places .j-column-wrap-l { float: left !important; } /* let sidebar ui float right */ .j-layout-sl.j-browse-content .j-column-s, .j-layout-sl.j-browse-places .j-column-s { float: right !important; } /* ------------------ */ /* --------------------------------------------------------------------------------- THREAD CONTENT BROWSER - Displays the contents of the posts. */ /* Put the brakes on infinite expansion of text. Sets how wide the text display area in a window can get. Eventhou the window maybe large, folks find it easier to read the words when the text area is smaller. */ /* Original post. Includes answering post if present */ /* posts in thread */ /* Types of replies */ #jive-thread-messages-container, /* Advanced reply */ #jive-body { max-width: 1100px !important; /* v0.61 */ } /* ------------------ Treatment for narrow window Method 1 (minimum optimization) Adjust community list table's shift and margin to maximize its width. */ /* v0.43 */ .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-places .j-column-l { padding-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } /* ------------------ */ /* --------------------------------------------------------------------------------- ACTIVITY STREAM */ /* activity entry */ .j-act-entry { padding: 5px 0px 10px 100px !important; } /* activity title */ .j-body-home .j-act-title { padding: 5px 0px 5px 24px !important; } /* activity body & comment */ /* v0.43 */ .j-body-home .j-act-init { padding: 5px 0px 10px 100px !important; } .apple-activity-comments-wrapper { margin-left: 0px !important; } /* Like list */ .j-act-grouped .j-act-g-item { padding: 3px !important; } /* ----------------------------------------------------------------------------------- PLACES */ /* v0.43 */ /* latest activity column */ .j-browse-details .j-td-activity { max-width: 650px !important; } } /* end of media for wide screen */ /* Narrow screen browser ===================== */ @media all and (max-width: 1265px) { /* v0.6 */ /* styles for small screens ( narrow browsers window ) ======================== Narrow is basically the same as the above wide screen browser except that this lets the sidebar column (filter column) in list view be pushed down or up in layout flow to make room for the main column (table column) when the window is not wide enough. It is done by setting margin-left and padding-left of main column to 0 and setting max-width of main column, which is currently 1019px. Consequently, if window width is less than 1265px (= 40 (margin-left) + 1019 (main column) + 166 (sidebar colum) + 40 (margin-right)), sidebar column is pushed down or up according to document tree order. This rule set is intended to be useful for normal to narrow window whose width is in range ca. 700-1400px. It can be used for wider window as well but there's no point to set the max-width of main column in order to move sidebar column when the window is wide enough. custom styles for Apple Support Communities board system introduced in 2014-06 (v 0.5) */ /* ----------------------------------------------------------------------------------- BODY */ body { background: white; min-width: 0px !important; } #body-apple { width: 100% !important; min-width: 0px !important; } /* Text reflow problem with New Activity Content etc. https://discussions.apple.com/thread/7517905 Provide work-around. Maybe Firefox issue. */ #apple-site-title { font-size: 14px !important; } /* ----------------------------------------------------------------------------------- ASC TOP PAGE */ #jive-widgetframe-body_5780758 > .content-large, /* discussions.apple.com */ #jive-widgetframe-body_188974 > .content-large, /* discussionsjapan.apple.com v0.42 */ #jive-widgetframe-body_20835 > .content-large /* discussionskorea.apple.com v0.42 */ { /* added parent id in v0.41 */ text-align: center !important; overflow-x: auto !important; overflow-y: hidden !important; } .apple-communities { display: inline-block !important; width: 1120px !important; text-align: left !important; } /* ----------------------------------------------------------------------------------- THREAD LIST BROWSER */ /* ------------------ Hide Like and Bookmark columns in thread list view. */ /* v0.43 */ /* ------------------ display in small screen changed 0.6 */ .j-browse-details .j-td-likes, .j-browse-details .j-td-bookmarks { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th, .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th { display: none !important; } .j-browse-details > table.j-browse-list > thead.j-rc4 > tr > th + th + th + th { display: table-cell !important; } /* ------------------ */ /* ------------------ Treatment for narrow window Method 1 (minimum optimisation) Adjust thread list table's shift and margin to maximize its width. */ /* v0.43 */ /* ------------------ (currently commented out) .j-layout-sl.j-browse-content .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-content .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-content .j-column-s { width: 166px !important; } ------------------ */ /* ------------------ Treatment for narrow window Method 2 (more beneficial to narrow window but has disadvantage for wide window) Let thread list table have full width but not exceed 1019px to make room for sidebar ui (filters & actions). If window is wide enough (>=1265px), sidebar ui is displayed next to thread list table, otherwise it is displayed below or above it (depending upon its document tree order). * sidebar width (constant) = 166px * thread table max width = 1019px * canvas margin-left = 40px * canvas margin-right = 40px --------------------------------------- * total = 1265px */ /* v0.5 */ /* ------------------ (currently active) */ .j-layout-sl.j-browse-content .j-column-wrap-l { max-width: 1019px !important; } .j-layout-sl.j-browse-content .j-column-wrap-l { margin-left: 0px !important; } .j-layout-sl.j-browse-content .j-column-l { margin-left: 0px !important; } .j-layout-sl.j-browse-content .j-column-s { width: 166px !important; } /* ------------------ */ /* ------------------ Swap left-right positions of thread list table and sidebar ui (filters & actions) */ /* fixed in v0.43 */ /* let thread list table float left */ .j-layout-sl.j-browse-content .j-column-wrap-l, .j-layout-sl.j-browse-places .j-column-wrap-l { float: left !important; } /* let sidebar ui float right */ .j-layout-sl.j-browse-content .j-column-s, .j-layout-sl.j-browse-places .j-column-s { float: right !important; } /* ------------------ */ /* ----------------------------------------------------------------------------------- THREAD CONTENT BROWSER - Displays the contents of the posts. */ /* ----------------------------------------------------------------------------------- ACTIVITY STREAM */ /* activity entry */ .j-act-entry { padding: 5px 0px 10px 100px !important; } /* activity title */ .j-body-home .j-act-title { padding: 5px 0px 5px 24px !important; } /* activity body & comment */ /* v0.43 */ .j-body-home .j-act-init, .j-view-profile .j-act-init { padding: 5px 0px 10px 100px !important; } .apple-activity-comments-wrapper { margin-left: 0px !important; } /* Like list */ .j-act-grouped .j-act-g-item { padding: 3px !important; } /* ----------------------------------------------------------------------------------- PLACES */ /* v0.43 */ /* latest activity column */ .j-browse-details .j-td-activity { max-width: 650px !important; } /* ------------------ Treatment for narrow window Method 1 (minimum optimisation) Adjust community list table's shift and margin to maximize its width. */ /* v0.43 */ /* ------------------ (currently commented out) .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: -166px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 166px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } ------------------ */ /* ------------------ Treatment for narrow window Method 2 (more beneficial to narrow window but has disadvantage for wide window) Let community list table have full width but not exceed 1019px to make room for sidebar ui (filters & actions). If window is wide enough (>=1265px), sidebar ui is displayed next to community list table, otherwise it is displayed below or above it (depending upon its document tree order). * sidebar width (constant) = 166px * community table max width = 1019px * canvas margin-left = 40px * canvas margin-right = 40px --------------------------------------- * total = 1265px */ /* v0.5 */ /* ------------------ (currently active) */ .j-layout-sl.j-browse-places .j-column-wrap-l { max-width: 1019px !important; } .j-layout-sl.j-browse-places .j-column-wrap-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { margin-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-l { padding-left: 0px !important; } .j-layout-sl.j-browse-places .j-column-s { width: 166px !important; } /* ------------------ */ /* Turn verical nav list into a horizontal nav list to save vertical space. This nav bar appear above the list of dicussions in the Your Content page. It appears below in the list of discussions page. A larger screen has room for vertical navigation, so let along. */ /* We need to make room for the horizontal nav bar. A floating right, the area to the left is blank anyway. */ .j-layout-sl.j-browse-content .j-column-s { width: 95% !important; } /* let more room for horizontal navigation 0.64 */ /* make nav bar horizontal amoung other things. */ div .j-column.j-column-s nav ul li { float: left !important; /* makes the list items horizontal */ width: 120px !important; /* width of each link */ text-align: center !important; margin-left: 0 !important; padding-left: 0 !important; } /* let a little space to the left of the navigation bar. */ div .j-column.j-column-s nav { margin-left: 0px !important; margin-top: 20px !important; /* max of margin-bottom of proceeding line and margin-top */ } /* after making the navigating link horizontal, the blue overlay box doesn't immediately jump to the draft box. After clicking on any of the other links, the blue box parks on the draft box and will not move. The function must be implemented in javascript which cannot be changed from css. Purge it. Upper nav bar on your content */ /* https://discussions.apple.com/people/<apple-id>/content */ body.jive-view-profile.j-view-profile.j-view-profile-nonself.other .j-second-nav > ul:nth-child(1) > li:last-child, body.j-body-yourwork.other li.active:nth-child(7) {display: none !important;} /* Found another blue overlay box. https://discussions.apple.com/people/<ASC_id>/content?manage=true */ body.jive-view-profile.j-view-profile.j-view-profile-self.other li.active:last-child {display: none !important;} /* style the link (a tag) inside the li Put a box around the links. Complete box makes for a dark middle Line. So, leave off right line but for righ most link. Do the best we can ASC box grey-line color #d7d7d7 also seems like grey #eaeaea */ div .j-column.j-column-s nav li a { border: 1px solid #d7d7d7 !important; border-left: none !important; /* avoid double border lines for middle items */ padding-left: 0 !important; } /* Fill in the first box with a line on the left */ /* Upper nav bar on your content https://discussions.apple.com/content?filterID=following~objecttype~objecttype[thread] */ body.j-body-yourwork.other li.j-browse-filter-group-item:first-child > a, /* https://discussions.apple.com/people/<apple-id>/content?manage=true */ body.jive-view-profile.j-view-profile.j-view-profile-self other li.active:first-child > a, /* https://discussions.apple.com/people/<apple-id>/content */ div .j-column.j-column-s nav.j-second-nav ul > li:first-child > a, /* lower nav bar, see here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education /content?filterID=contentstatus[published]~objecttype~objecttype[thread] */ body.j-body-place.other li.j-browse-filter-group-item:first-child { border-left: 1px solid #d7d7d7 !important; /* avoid double border lines for middle items */ } /* Hover over nav bar item */ div .j-column.j-column-s nav li a:hover { color: #42aaff !important; /* light blue */ } /* See if we can position "start ad discussion, Write a user tip" bottom bar a little better */ .j-box { margin-top: 40px !important; float: right !important;} } /* end of media for narrow browsers. */ } /* @-moz-document */ /* Leave the login window footer alone. So, turn these fields back on. */ @-moz-document url-prefix(https://discussions.apple.com/people/), url-prefix(https://discussions.apple.com/welcome), url-prefix(https://discussionsjapan.apple.com/people/), url-prefix(https://discussionsjapan.apple.com/welcome/), url-prefix(https://discussionskorea.apple.com/people/), url-prefix(https://discussionskorea.apple.com/welcome/) { /* legalistic bomblast on login window*/ #globaldisclaimer.sosumi {display: inherit !important; } /* path to here */ #j-footer #breadcrumbs {display: inherit !important; } /* apple product info */ p.gf-buy {display: inherit !important; } } /* Addresses problems with decorator tag mentioned here: https://discussions.apple.com/message/30170332#30170332 looking for a page like: https://discussions.apple.com/thread/7522221?decorator=print&displayFullThread=true */ @-moz-document regexp("https:\/\/discussions\.apple\.com\/thread\/.*\?decorator=print&displayFullThread=true.*") { /* Debug to identify which page we found. Place our ukiyo-e. */ h1 { background-color: aqua !important; border: 2px dashed black !important; } #jive-body-full { margin-left: 80px !important; } /* Avatar runs off the screen to the left. Level info is to the right instead of below. */ /* better align avatar */ div.j-post-avatar { margin-left: 60px !important; text-align: center !important; margin-top: 30px !important; } /* ------------------------------------------------------------------------------- THREAD CONTENT BROWSER status level expertise badge To avoid formatting problems of badges overlapping next post, enable this line. There is no room for badges, so get rid of them. */ .j-status-level.expertise-tile { display: none !important; } /* the text of the post needs to be moved to the right to avoid the avatar. ".j-thread-post.j-rc4" is included in all post. ".section.j-original-message" marks the first post. */ .j-thread-post.j-rc4 { margin-left: 100px !important; } /* move level icon below avator */ span.status-image { display: block!important; text-align: center !important; } /* move level number below avatar */ span.level-points { display: block!important; text-align: center !important; } } /* end of regexp */Version 0.64
- -Left corner with the right header information
- -Remove excessive white space in the header
- -Remove the redundant wording in the header
- -Change two vertical to horizontal nav bars
- -Purge footer bombblast
- -Spanish and Portuguese support forums
- -Support tag decorator
Can you give some details in these?
- "header" I think that the black bar at the top of each page in apple.com all - I see it DELETED completely
- accomplished by changing the SIZE of the type?
- See #1
- I'm naïve - 'vertical navigation bar' was where? (example URL would be great - more screenshots would be great!)
- Gottit. All parties (I never get that far down on the page in any case)
- with the addition of [domain (communities.apple.com)]
- What is a 'tag decorator "?
-
The CD/DVD drive in my laptop is missing or not detected by my Acer Aspire 4520?
A while ago my laptop Acer fell and the CD/DVD drive pulled after its fall. I thought for sure that it was broken and my laptop. Fortunately it seems not that this was the case and after that put in does what it normally would, the green light would flash and it seemed to work again. However, I never thought not to test with a DVD or CD to see if it actually worked. Is that recently that I started to use CD for games and other and I found the driver to read the discs, but nothing happened thereafter.
Well for some time now, I tried to find a solution to my problem. The driver seems to work, but when it comes to playing the discs it do anything more. Some of my other programs such as Windows Media Player saying that my laptop is missing the driver CD/DVD. I also went to the menu of F2 from the laptop to the startup and after looking around, I find that there is no entry for the CD/DVD drive and that the entry is empty. I'm not sure why my laptop can't detect the drive. I tried many things such as the Microsoft Fix It, but ends up giving me an error saying that some components are not well read or something similar to that.Any help is greatly appreciated and if there is anything that I can provide for any further help I will do it gladly.I should also mention that the CD/DVD does not appear in Device Manager.Hi Emmanuel,.
It's a hardware problem, your CD/DVD drive is not detected by your computer. I suggest you to follow the steps and check if it helps.Method 1: Check if your CD/DVD drive is detected in BIOS Basic Input Output System ().
IMPORTANT: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.Method 2: Follow the steps in the link and check if that helps.You can also try to contact Acer support and check if it helps.
http://secure3.TX.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=Acer -
Upgrade Windows 10 failed C190012F
I post a new topic because I have simply not been able to solve these problems little matter what I tried.
At this point, I'm thinking a clean installl, but that would require me to reinstall virtually everything (which is a LOT).
I went through endless discussions on this issue and several other forums and tried everything without success.
Things like:
Delete whats downloaded and start again (I partially downloaded W10)
Remove my HARD drive, so I only have my C SSD drive
Start in safe mode
Manipulation of the registry
etc etc.
The problem
I have a partially downloaded W10, the rest is 2.5gig. When I download everything works fine. It restarts the operating system, but then I'm back to where I started. Download the 2.5gig repeatedly. I get this message of failure in windows update
Fail code C190012F
Now, I've seen this thread c190012f thread Microsoft
you want the event logs. However I won't be playing with Live-ID.
Also why I would replace the Secirity of security Norton, norton is much better. I can however disable for the upgrade.
I downloaded relevant newspapers and information system
Hope you can help.
While I'm waiting, I'm going to try to continue to update windows
Kind regards. Martin
Hi Martin,
Thank you for the update.
- How do you have downloaded Windows 10?
- How are you trying to install?
Step 1: Download the windows 10 ISO
Refer to the article below and download Windows 10 ISO using media creation tool.
Step 2: Make a USB bootable flash drive
See section to download the Windows USB/DVD download tool to transfer the ISO on a USB flash drive to make it bootable device.
Important: Ensure no data in a USB flash drive before you make it bootable device. If you have any data, save it as a result.
Now, change the boot priority in the BIOS and then restart the computer, so it would start directly from USB/DVD.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I hope this helps.
-
Hello
I can't read the CD/DVD on my computer (Windows 7)
Control Panel > system and security > Device Manager in that there is no CD/DVD Drive that TOSHIBA MK5076GSXN
Can you help me please?
Hello
Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.
Please answer the following questions that would help us provide a better solution.
1. What is the brand and model of the computer number?
2 were there any hardware or software changes made in the computer before this problem?
As your CD/DVD drive is not detected by your computer, it could be a hardware problem. However, I suggest you to follow the steps and check if it helps.
Method 1: Check if the CD/DVD drive is seen in BIOS Basic Input Output System ().
IMPORTANT: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Method 2:
follow the steps described in the following link and check if it helps.Your CD or DVD drive is missing or is not recognized by Windows or other programs
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Hope this information helps. Please do not hesitate to answer, we would be happy to help.
-
Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key
Hello
1. What is the brand and model of the laptop?
2 have you made any changes to the computer before the show?
Method 1: Change the boot order in the BIOS settings:
See the following steps:
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
(a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.
Warning: some manufacturers use F10 for recovery of the system.
(b) glance to "Drive Configuration", "Boot order" or similar
(c) check the second drive the first boot device CD/DVD and hard drive.
(d) to save the settings and exit.
Method 2:
Step 1: Trying to boot into safe mode and see if that helps.
Start your computer in safe mode:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If step 1 work, try step 2
Step 2: A clean boot to check if startup item or services to third-party application is causing this issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.
-
"Cannot be reset. "HELP the required partition is missing.
So I tried to delete windows 8 completely off my computer from the bios. The two partitions, I had was "Recovery" and my other main drive. so I formatted my main drive to remove windows 8 of my computer. now instead of saying "Boot Manager is missing"(ce que je veux arriver parce que je sais pas quoi faire de là), my computer starts with a logo of windows 8 and it says "pc repair". "." After he know that he just can't fix anything it sends me to recovery.if I press reset it tells me the score is missing. Means that I can not install another OS? I want to install windows 7, that's why I tried to format the drive, and also because I had a diary for windows srttrail error 8 which was irreparable no matter what I tried. Is windows 8 always on my pc? I know that I have not a not format the disk bad because theres only 2 drivse with content on it! Im going to buy windows 7 soon and I want to install. Could I do it? my computer is completely gone? I could just install windows 7 on a partition I formatted. IM super confused
Hello Purpleice,
Thanks for posting your question on the Forum of the Microsoft community.
You can not downgrade from Windows 8 for Windows 7 and Microsoft also does not recommend it. However if you still want to install Windows 7 on your computer you will need to boot from the Installation of Windows 7 support and then try to install Windows 7.
Also, if you wish to format it is recommended that you start the computer using the windows installation media 7 and then format the disks. After formatting the drive, you will need to install Windows 7 on one of the main partition.
Note: you must change the boot priority to the media through which you try to start Windows 7.
There is no guarantee that all built-in Windows 7 drivers will include specific hardware. Therefore, please make sure you have the correct drivers available before starting the installation. Pilots usually come on CD/DVD provided by the manufacturer with the newly purchased equipment. Alternatively, you can also download the official vendor Web sites. Have the drivers available will ensure that, after I installed Windows 7, your system will happen in all its fullness. If you meet the above three conditions, we are ready to go.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Boot from the Windows 7 DVD
The first step is to place your Windows 7 DVD into the DVD tray and start the machine. Your computer must be configured to boot from the DVD. This is done via the BIOS. On most computers, the BIOS menu are accessible by pressing F2 or Del key while the machine starts.
Once you complete this step, Windows 7 will begin to load. If you see the image below, you're doing good so far.
After a few moments, you reach the installation menu. Your first step is to choose the language and keyboard.
You will now have the menu install now. We have already prepared for installation, so you can click install now and move forward.
The next step is to accept the license agreement.
As you install Windows 7 on Windows 8 that is why you must select Custom Installation the list form.
Partitioning
The next step is to choose where you want to install Windows 7. It is probably the most important part of the entire plant, but be careful here and make the right choices.
After selecting the drive to install Windows 7, click Next.
Start the installation
If you are uncomfortable with your configuration, select the created partition and click Next. Windows 7 will be installed on this partition. Depending on your hardware, this can take some time. My tests show about 30-40 minutes.
During the installation, your computer may restart several times. So be.
User settings
Finally, you will be asked to provide your user name and a computer name. You can also password - protect your account. It is the most recommended. You should opt for a password strong.
Activation
The next step is to activate your Windows. Take your key and type it here.
After entering the key, click Next. After that Windows 7 will be installed on your computer.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
Important NOTE about passwords in bios bug!
Hey everybody,
IM the proud owner of the laptop Lenovo SL - 500 series. I never had any problems until today:
I decided to add a supervisor and Boot password in bios to better secure my files, I found a huge problem here and I found the solution that perhaps others would like to know too:
Example:
Ive like password "abc123 #1" in the bios, he asked me to confim this password and I did it. All is well until now.
I restart my laptop and he invites me to type my password to start:
Password: "abc123 #1.
Jim
Hey now, that's strange, the password that I just put refused. (Stress level was up to 90% instantly, cause as you may know Lenovo data security is so good that you would need a new motherboard if you can't get the password!)
I have tried tons of passwords but he refuses the password. Until I found the problem and the solution of a lot of luck!
the symbol # is NOT handled correctly in the bios. If you set the password, it allows. If you try to change it and retype the password it allows. But when you're out of the bios and the password prompt is displayed. It wil not understand the special symbol.
What causes your password not valid cause is not the 'same' password.
Solution:
I replaced the # with the TAB key on my keyboard
So instead of typing the # I knocked my TAB key once (Yes it magicly is considered as a symbol).
So that was my password 'abc123' TAB '1 '. Instantly my laptop boot and I was able to access the bios again and remove my password set using the TAB key instead of the special symbol # in my password.
So for future reference: do not set a special symbol like password in your bios. Even if she acts as if it was OK. It will be brick your laptop and it will cost you a new motherboard if you find out what the symbol is replaced by.
In my case No. == TAB, I don't know what it is for other special symbols and im going to try it!
I hope that people will appreciate this information and this will help other people who accidentally brick it portable by applying a special symbol in the password here!
Other users of Lenovo good luck!
Séverine,
Thanks to consolidate related topics. Based on these discussions, their solution was to omit the special character when access to the bios, but this current thread's advise to use a different key replaces a special character. However, it doesn't matter as the most important thing is to ban the use of special characters in the first place. Don't you think?
Technokiddy,
I reported this problem and advised him to consult the version 1.28--> update BIOS (Bootable CD) - ThinkPad SL300, SL400, SL400c, SL500, SL500c
Before you can update this new bios, make sure to disable the BIOS password avoid any unexpected errors.
Problem fixes:
-Improved password security.
-Fixed an issue where the LCD brightness setting could not woHowever, I do not know if the use of special characters are not allowed or not in an attempt to put in place a new password.
There are a few questions that I need to confirm double with you also.
- Could you tell me how you insert the special character ' # ' for supervisor password? The English keyboard layout and Netherlands's character "#" is given by shift + 3
- Are you sure you selected character ' # '?
- Go to the windows Notepad and press the same button that you press is the BIOS password settings. What character do you see?
-Cleo
-
639409-011-notebook PC: how to reset the admin BIOS in Elitebook 8560p (very important)
Dear HP teams & forums,
I need your help for my laptop Elitebook 8650 p in my problem (reset BIOS admin) because I do not know this password and this very big deal for me.
I really appreciate your collaboration with me, please advise.
Best regards
AlattAR
Contact HP.
http://welcome.HP.com/country/W1/en/contact_us.html
Or download these files.
https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0
Insert a clean USB flash drive.
Then run USB Image tool.
Choose the flash drive, and then click RESTORE.
Remove the flash drive after the restore.
Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.
At C:\OUTPUT, type CD... "And then press ENTER.
HPBR of type "and then press ENTER.
First thing is to save your settings.
Select 3 # re-program.
Press "S" to save the system information.
Type HPBR and press ENTER.
Select 'of FIRST BROADCAST.
Then select the model.
After the restart to repeat, same as above but this time SELECT 'SECOND RUN.
Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."
http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html
More details here.
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Hi, last week I tried to update my bios in windows mode, so, during the bios update windows has cong61ateun... now nothing when I
try to start the laptop only led to cd rom drive and hard drive. Does anyone have a suggestion? can I fix my laptop? no way to recover the bios?
A little question where the bios on the motherboad is located?
I hope someone can help me.
Thank you
I know it's too late to say this, but there is an 'important' WARNING use external power supply when the bios update and not cut the power supply even if the computer seems to freeze.
If you can always start in DOS, then try version disk bootable back of the update of the bios. But it sounds like the bios is corupted, this option is probably not. I think the best thing to do is send to hp service, unless you now how to open up the case and find the jumper to reset bios.
BIOS is typically stored in a ROM chip, not on the hard disk.
-
EliteDesk 800 G1: EliteDesk 800 G1 does not boot UEFI disks immediately after-> UEFI BIOS change
I am changing our configuration of the BIOS boot in the UEFI. I tried to simplify the problem.
I boot via PXE BIOS of SCCM task sequence and perform following actions:
- Apply UEFI Secure Boot configuration with BiosConfigUtility (enable Secure Boot, boot which is ignored anyway... order)
- Fixed disk partition type as TPG
- Create Fat32 partition to boot EFI and an NTFS volume for the data
- Apply WinPE to NTFS and copy the boot (bcdboot) in Fat32 files
- Set the volume to Fat32 as ESP
- Reset
Now BIOS does not allow me to start this disc. Disk appears in 'Device Configuration', but not in the boot order.
If I start again to PXE (now in mode UEFI) and check the contents of the disc, everything seems in order. If I reapply my script to repeat steps 4 and 5, and then the next time the disc will apper in the boot and boot order.
If before the first attempt of UEFI, I put in a known UEFI boot disk, the system does not start it no more.
I think that there is a bug in the BIOS.
I saw something similar with Z620. When to apply some config past to the BIOS, the system is no longer shows startup valid drives in the boot order (this attempt was in BIOS mode). Emulation of the RAID controller is switched back to AHCI has worked around him then. But this time I'm not emulation of the controller.
As BiosConfigUtility reports that it has fixed start changes but when reading them back (before or after the restart, they are the same). It's not as important, but
BiosConfigUtility 4.0.15.1
BIOS final v2.68
My repro led nowhere (successful boot) but I was hired by HP support and all by responding to their email, I accidentally found the question.
My BIOS setup script was a command to disable temporarily BitLocker if configuration is repeated his request for a system that is already deployed.
manage-bde-protectors-disable c:
However, this had inexplicably FAT32 partition become encrypted. If I started to UEFI PXE SCCM WinPE on the next boot, silently erased WinPE encryption and system would be on hard disk again, causing confusion.
But when, for a test, I booted a Linux LiveCD, it showed encryption.
I guess it's been like this for a while but only in this case C: was be the UEFI boot partition (usually it's system partition). In hindsight, my repro of WinPE image have also components BitLocker...
I deleted command BitLocker and now it starts normally on hard drive after the configuration change. Detective Conan for time to engage the support of Microsoft and HP...
-
Configuration of the BIOS XW8600 for SSD and HDD
Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options. 250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.
I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive. I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.
I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it. This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.
Can anyone offer any suggestions or comments on how I can improve this situation?
Thanks for any help, you can suggest.
What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP? If I remember well Vista 64 was the latest HP OS with sold. In this case you won't have to deal with a set of HP restore disks. I would never do an "upgrade" of a prior installation of OS in W7. I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD. I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).
Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD. That will take some time. Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.
The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.
Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago. It is an important.
Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation. Change that on "RAID + AHCI. Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.
Demarrer start on the DVD, select clean install and things will be fine. I usually set my boot order to start hard drive/SSD first and second optical drive. Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.
It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed. I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores. I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.
After you have things working with the SSD and the DVD player you can add in your other material sequentially. I would like to make a reboot between each addition, just be very careful. Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.
All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.
Let us know how things are, so that others can enjoy...
Maybe you are looking for
-
8.1 win a crash. Find that Mozilla had lost all files thereafter.
The race you bird for a few years, a happy user.Now on earn 8.1, with you bird 31.5.This morning, after normal shutdown last night, would not restart. After several attempts, he says 'repair disc error. " Finally he is settled and started OK.But when
-
How permanently delete photos in El Capitan for free space
I need to free up space on my MacBook Air. I deleted more than a thousand pictures, but he has not released any more space. "secure empty trash" doesn't seem to be available. Any suggestions?
-
How to take the measurement time of waveform.
Hello I faked a square signal I need to measure the period of time without interruption... automatic measurement of the time for one cycle... For example, I have square wave, and I need to measure the period of time and display it without attributing
-
To start windows install tries to run something that I deleted. How can I stop this from happening?
In my view, that it is an external hard drive that I uninstalled it.
-
Phone with SIM in the phone consumes 4 times more battery
I HAV ASUS P320 windows mobile 6.1. Last week 1 my phone consumes 4 times more battery, then it usually does if the sim card is in the phone. without the sim card the phone using normal battery. Also the phone gets hanged frequently now. themes chang