Elite HP 170 f

Similar Questions

• New graphics card for HP Pavilion Elite HPE-170 t

  Hi, I'm getting artifacts screen sporadically, Ithink my video card is starting to go bad. I want to get a new one, but I do not know what will fit. My computer HP Pavilion Elite HPE-170 t:

  • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 8 GB DDR3 1333 MHz SDRAM
  • 1 TB hard drive 7200 RPM SATA 3 Gb/s
  • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
  • LightScribe SuperMulti DVD burner
  • Player 15-in-1 memory cards, 1 USB, 1394, audio
  • No TV Tuner
  • Creative Sound Blaster X - Fi Titanium

  I see by a few other questions here several cards video suggested, but these responses were a few years old and these video cards are no longer available.

  So, any suggestions on the new video cards less than $200, which will be more apt to little and works as easily as possible? Thank you!

  OK, I got my new video card, to be exact of it:

  http://www.Amazon.com/XFX-250E-800MHz-graphics-R7250EZNP4/DP/B00JM5XX9O/ref=dp_ob_title_ce

  http://www.xfxforce.com/en-us/products/AMD-Radeon-R7-series/AMD-Radeon-R7-250E-core-Edition-R7-250E-znp4

  It works like a champ! Took me about 5 minutes to install the card physically and 15 minutes to install all drivers and updates.

  So far so good - everything seems OK, so if anyone is looking for a video card for this configuration, it worked for me.

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Pavilion Elite HPE-170 t - Wi - Fi adapter with antenna?

  I would like to connect to a desktop Pavilion Elite to a local network. The router is a Linksys EA3500 (802.11n technology). The distance between the router and the wireless adapter on the desktop will be about 30 feet with walls between the two.

  The office doesn't have an outdoor antenna. When I checked for network adapters, I found this: Realtek RTL8168 / 811D Family PCI - E Gigabit Ethernet NIC (NDIS 6.20).

  I use the computer for HD, movies, not for games. Should I buy a Wi - Fi adapter? And if so, which one of these adapters Linksys would give me better performance?

  1. a USB adapter - http://bit.ly/1tg8Cj1

  2. a card PCI adapter with antenna - http://bit.ly/1pzVpSt

  3. a USB adapter with antenna - http://bit.ly/1taGZd2

  Thank you

  Brescia

  Record office:

  Product name: BN496AV-ABA-HPE-170 t

  Product number: BN496AV #ABA

  Operating system: Windows 7 Ultimate 64-bit

  Hello:

  I have the AE3000 on two of my HP business offices.

  It has good reception and never had a problem with either of the units.

  I have a 2-story house with a finished basement.

  My Linksys EA 4500 router is on the second floor.

  One of my desltop of PC's in the basement.  The AE3000 on it, you get 4 bars of reception on the 5 GHz band and 5 bars on the 2.4 GHz band.

  Connection speed is 324 Mbit/s (out of 450) on my PC of basement on the 5 GHz band.

  Connection speed is 216.5 Mbps on bandwidth 2.4 GHz because I have this band the blended value that allows (wireless B and G) to connect legacy devices.

  It works fine on W7 x 64 and x 64 W8.1 (using the drivers W7 on the CD).

  It also comes with a 3' USB cable attached to a docking station so that you can position the camera somewhere for better reception.

• Pavilion Elite HPE-170 t: need help with the result of a command prompt to Power Options

  I have recently upgraded to Windows 10 in Windows 7.  Like so many thousands of people, I problelms of sleep mode.  Mine will not be auto-sleep.  It has been suggested that I saw to run command prompt: powercfg-applications

  It supposedly will list the items running on your computer which can now be auto-sleep to work.  I tried several times and up to now, I get the same item displayed each time.  This is what is displayed: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) is followed by this message: a file delete operation is underway

  My first thought is that if there is an operation to remove file in progress all the time, it's maybe the reason why my computer is not auto-sleep.  If there is someone out there who can shed some light on this situation, I would appreciate the help.

  EUREKA * SOLVED
  

  I found the answer to my problem!  After using the control system: powercfg-query and get the answer: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) delete file operation is in progress

  I started looking for whatever it is associated with the answer above.  In the Manager of tasks in respect of the services, I found the name of the file hpqddsvc, with a description of HP CUE DeviceDiscovery Service was running.  When I stopped the task and re-tried in opt power standby mode, it worked correctly.  In the Configuration of the system (by typing msconfig at the run prompt) on the Services tab, I unchecked the box for HP CUE DeviceDiscovery Service and rebooted the computer.  The service is no longer running.

  I'm sure that this Service has been added to my computer when I downloaded the hp.com/support product detection tool .  The tool scans your computer to detect and identify HP products.

  This can be useful to others who have the problem of the auto-sleep I've had.

• HP Pavilion Elite HPE-170 has Desktop PC - graph disc flashing - Normal?

  Hi all

  I just bought a http://support.hp.com/us-en/document/c01969875

  and I was wondering if the orange graphic of 3 discs piled on each other in the right upper part of the façade of the tower is supposed to flashes and turns off all the time?

  Or is it telling me that I'm supposed to do something?

  Hello BigBad64, while I'm not familiar with your system, the light you describe indicates the hard disk activity.

  Normally, that's fine because it flashes a little or even a bit, depending on what the system is doing at a given time.

  Even if you can not do anything, the drive hard activity can and cannot, turned on because of background running applications and services.

  There is also the possibility of Windows running the task of "Indexing", which is supposed to help with research on the system.

  I'd be too concerned about this, as there doesn't seem to be normal.

  I noticed that you mentioned that you just received this system. It was released in December 2009 for customers in Australia.

  This would be not for me either, just thought that it kinda weird that you have just recently.

  I hope this helps.

• Should I have a WiFi card installed?

  I googled this to death and had an email back & forth with HP support and I'm still not the wisest. I hope someone can help with a definitive answer.

  I have a desktop PC HP Pavilion Elite HPE - 170 bought in Australia. The product say that there a "wireless card 802.11 b/g/n Mini PCI-Express half-length" installed.

  When I go to control panel > DeviceManager > network adapters, the present one is a 'Realtek PCIe GBE Family Controller.

  If I try to download/install the driver for the wireless card I get the error message "your system does not meet the minimum requirements for this update. Update has been canceled. (9996).

  I'm not that familiar with that sort of thing, but all this does not seem to suggest that I don't have a WiFi card installed?

  I have to pull the sides the computer turned off and physically take a look? If so, where exactly?

  Hello:

  If you do not see the model of network card wireless list in addition to the wired Realtek card, it could be one of 3 things...

  1. you are correct and either HP forgot to install the card, or the card is incoreect.

  2. If you see a device listed as a network controller listed in the other devices category in Device Manager, then the wireless card is present and the drivers must be installed.

  3. the wireless card is installed but is defective as DOA, or PCIe x 1 adapter that holds the card to the motherboard is loose and has a bad connection.

  Here is the link to the service manual for your PC.  I have not your model, so I have no idea where to find other than to tell you that the wireless card will have a wire antenna plugged on it and it will be mounted in one of the small slots PCIe x 1 on the motherboard via a larger map.

  http://h10032.www1.HP.com/CTG/manual/c01835749.PDF

• Updated drivers or not?

  Hello

  I have a one year old, HP Pavilion Elite HPE - 170 a desktop PC (Windows 7) in which I've recently updated the graphics card for games. I keep its driver updated regularly via the Nvidia site.

  Should I update the drivers of other PC however, particularly the Realtek audio driver, if the pilot online various software update (Driver Alert, Driver Boost, etc.) tell me that they are up to date? Or is this a case of "if it's not broken, don't fix it"?

  And what are the reliability of the results of the software update to match new versions of driver on your PC in particular?

  Realtek advises on their website download page you should download the latest High Definition Audio drivers from the website of the manufacturer of your system/motherboard, not them.  This Web site lists, for the most part, only the original drivers.

  And to add to the confusion, the function Windows Update in my PC device manager tells me that everything is already updated.

  This all came because I am about to install a Logitech 5.1 on my PC speaker system.

  Any advice? Thank you.

  Natton, welcome to the forum.

  It is a matter of concern that many members to share with you.  When updating the driver for the components of the computer?  I normally update the driver as soon as there is a new one available; especially the video driver.  There is a reason for the update, even though it may not be relevant to my computer.  Unless the component is older, I've never had a problem with the new driver.

• Artifacts strange screen with my 1 GB ATI Radeon HD 4850

  My (now 4 years old) configuration:

  HP Pavilion Elite HPE-170 t

  • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 8 GB DDR3 1333 MHz SDRAM
  • 1 TB hard drive 7200 RPM SATA 3 Gb/s
  • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
  • LightScribe SuperMulti DVD burner
  • Player 15-in-1 memory cards, 1 USB, 1394, audio
  • No TV Tuner
  • Creative Sound Blaster X - Fi Titanium

  From the other day, I get artifacts strange screen. Sometimes, I have horizontal lines, vertical bars sometimes, square pink sometimes strange checkerboard (which will sometimes disappear when I use my mouse wheel).

  I have updated all drivers started in safe mode, returned a few weeks on recovery - and a lot restarted. Sometimes mistakes have been fixed, sometimes not. I also cleaned all the dust from inside. Time here are almost the same everyday also.

  I guess the video card goes wrong, but I hope that there may be an easy fix, I forgot. If this isn't the case, I need recommendations for a new video card.

  Thank you!

  I received and installed a new video card, and the problem is now solved.

  See the thread below for the reolution:

  http://h30434.www3.HP.com/T5/desktop-hardware/new-video-card-for-HP-Pavillion-elite-HPE-170t/m-p/4023574#M82067

• Recovery disks system - lost, how to replace?

  Hello

  I have a PC desktop, HP Pavilion Elite HPE - 170 to run Windows 7 Home Premium 64-bit with SP1.

  It was bought in 2010 with the operating system already installed in the store where I bought it here in Australia.

  I managed to lose the 3 'system recovery discs' that I created when I brought the computer home and put in place. It does allow me to create another set.

  How can I get a replacement set?

  How to order a HP system recovery disk.

  From an HP partner

• How can I send emails in bulk to our members of the 170 club?

  I want to use Thunderbird as the e-mail program for our boat with 170 members club. We send an update to all members once a week, but Thunderbird will not send this number in one batch. If this is not possible, how can I split into acceptable groups for Thunderbird email addresses?

  the best method would be to use mailing lists.
  See the info here:
  https://support.Mozilla.org/en-us/KB/how-create-and-use-mailing-lists-Thunderbird

  There seems to be a limit of about 60 addresses when sending messages if you enter each address separately.
  However, if you use lists (mail distribution lists) for most of the addresses any limit is imposed by any SMTP server, you use.

• HP Elite 8300 SFF: his low profile card

  I have an Elite SFF 8300 and am looking for a card low profile with coaxial output so that I can use it on my sound game of boston that has a coaxial input. I tried without success.

  Thank you

  Thank you for the information, @PeterHB.

  Here are the system requirements for the card:

  The system configuration required
  • 1.0 GHz Intel / AMD CPU
  • 1 GB OF RAM
  • A free PCIe slot
  • A free location for the digital expansion
  • Internet connection for downloading drivers and software
  • Microsoft Windows XP/Vista/7/8

  The card is compatible with Win 7.  However, I have highlighted in orange system requirements you must check to ensure that they are available.  Apart from that, I think that the card should work.  I always offer the check with the Technical Support of the manufacturer is a good choice.  They are the experts on their products.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Elite x 3: where can I find more information on the elite x 3

  I am interested in the x 3 elite, how can I find more information about it?

  Thank you

  Bill

  Hey Bill,.

  The X 3 elite is new HP phone + Tablet for businesses.

  There is a FAQ available here:

  HP Elite x 3-fair questions

  Help content extra is available here:

  HP Elite x 3-preview

  HP Elite x 3-specifications

  HP Elite x 3 - using Continuum from Microsoft (Windows Mobile 10)

  HP Elite x 3-connection to the desktop docking station

  HP Elite Windows 3 x 10 mobile devices and applications

  HP Elite x 3-Add and remove SIM and microSD cards

  HP Elite x 3-transfer of data and Contacts of Android or iOS

  HP Elite x 3-bet software and drivers (Windows Mobile 10) updated

  -wes

• Superior experience of Office Elite x 3:10 third-party Windows applications not (Windows Mobile 10)

  One of the reasons why I bought the X 3 elite was the attractive option to use it as a PC. I quickly learned that this meant. Not like a PC Windows 10. but rather A Windows Mobile format on the larger screen. A PC or a desktop experience would be for me means the use of many Windows 10 applications and set third-party apps. Experience in the future with a very strong focus on the experience of office with the elite x 3 y at - it something that I am missing and there will be opportunity for a desktop Windows 10 real updates.

  Hello

  Elite x 3 uses the mixture of Microsoft function to view the applications on your screen 'big screen '.  Since this feature is part of Windows Mobile 10, only some applications Windows Mobile 10 will work Continuum.

  For more information you can view this document on the Continuum: http://h20566.www2.hp.com/hpsc/doc/public/display?docLocale=en_US & docId = emr_na-c05170163 & sp4ts.oid = 10722027

  However, HP has a solution called workspace that will allow customers to run their standard Windows programs on the elite x 3: hp.com/go/workspace.  It is only available to customers of commerical so it may not work for you.

  Personally, I use TeamViewer remote connect to my other laptop when I need to run regular programs.

• Elite X 3: OneDrive unable to access multiple accounts

  On my Elite X 3 the OneDrive app is not seemt o allowing access to multiple accounts. I see the account Office 365, in that I am connected, but there is no option to add my personal account as on other platforms using OneDrive

  Quality of the App Store there is no personal onedrive compared to business as it is for Win10 or MACos - suggestions or it's just a missing feature?

  Well duh! Thank you. That's exactly what I expected to see and to swear that menu option did not exist before the last update :-)

  Thanks again!