EliteBook 2730 p extremely slow after 5 flashes

Similar Questions

• Why illustrator cc 2015 went extremely slow after the last update?

  Why illustrator cc 2015 went extremely slow after the last update? Someone knows how to fix this?

  Envoy! Thank you

  preferences to reset/delete the AI seems OK for now

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.

• Smart Sharpen extremely slow after update CC2015

  I like the sharpness was working a lot, all ok in Photoshop CC2014.

  But after the update to CC2015 it works extremely slow.  Rendering final, but for all the actions in the smart sharpen box.

  Like this, this is not really useful more

  Have tried uninstalling and reinstalling, nothing helped.

  7prof 64-bit Windows.

  Why is this?  What can I do?

  I have it!

  I turned on "Use Open CL" in preferences / performance / settings of GPU

  Now, it's fast as hell

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• First Pro CC extremely slow after the last update

  Creative cloud warned me of a new update a few days ago and I updated 2 days ago. At the old opening projects with the updated program, it imports the old projects and prompts me to save them as different files. All very well here. But quickly, I realized that it is extremely slow, collaborating with the update program. When I move the slider along the timeline, it takes a few seconds when the program will display the image.

  What is going on? I have a deadline and I need to return to work as soon as possible.

  Specifications of the computer:

  2.8 GHz Intel Core i7, 16 GB, OS X 10.9.5

  The common practice is to open a project in the version with which it was created.  Reinstall the old version.  You can have both installed.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.

• extremely slow after the automatic update of Firefox 7.0.1. is there something wrong with how works the automatic update?

  It takes a long time for each time I try to go to a new page. the browser crashes just for awhile. It started after that Firefox auto update 7.0.1.

  Try this

  Type in the address bar

  Subject: config

  Accept the warning.

  On the page that appears, in the filter box, type

  Network.http.Max - connections

  Replace the value 32 (which is probably the value 256 in your case).

  Close this page.

  Restart the browser.

• Imports are extremely SLOW after update to 2015.3

  I am experiencing gruelingly slow imports, several minutes to 1 clip that, before the update was almost instantaneous. I produce a weekly and have a very solid workflow that is identical to each week. The only thing that has changed is the version of the first everything is technically identical to before including the clip length give or take a few seconds, format, codec ect. If I try to interact with the import dialog box, as in the move, it says "not responding" but will finally complete the import.

  There are a couple of new options... or of differences in the application of the old options... that can cause such things.

  Most probably one is "Enable accelerated H.264 encoding"... which seems to slow almost everyone... found here and as shown, I suggest to disable (uncheck) this option:

  

• ESXi 5.1 VM running extremely slow after a power failure

  Help, our virtual machines are run at a crawl since a power outage a few days ago. Everything seems to be in good shape.

  Host is DL385 G7, 12 Dual core AMD, 48 GB memory, data store local storage (4) SAS 600 GB is running in RAID 10 for a total of 1.2 GB

  Where I even begin to start looking?

  4 critical VM:

  Domain controller - Server 2008

  SQL Server - 2008 Server

  Terminal Server - Server 2008 R2

  Mail Gateway - Windows 7

  3 other various OS VM:

  Windows XP

  Server 2008

  Linux power virtual management appliance base.

  I turned off these 3 for now hoping to free up resources (doesn't help anything).

  Memory and CPU use is nothing more than normal. It is sufficient that the virtual machine is so slow to the point where they are almost unusable (block-by-block refresh screens)

  Each client computer is a thin client, and they often lose communication for 10-20 seconds each time, I do not know due to timeouts.

  If the screenshots of the content of the folder of the virtual machine, or anything else would be helpful, let me know.

  Hello

  Everything seems to be in good shape.

  Check the status tab material on the host and the status of all sensors...

  On a host that unmanaged-> Configuration tab - > material - > health

  Then, you can take a look at log files and search for:

  error, warning, fault, panic, trace... "events".

  For ESXi host:

  /var/log/VMkernel.log

  /var/log/vobd.log

  VM log file:

  VMware.log - in the same directory as the files of the virtual machine

  If it is possible to download...

  If you are unable to find anything suspicious in the newspapers using ESXTOP next level...

  For troubleshooting with ESXTOP discover these excellent sources:

  http://www.yellow-bricks.com/ESXTOP/

  Esxtop statistical interpretation

  http://www.VMworld.NET/WP-content/uploads/2012/05/Esxtop_Troubleshooting_eng.PDF

  See also:

  VMware KB: Troubleshoot ESX/ESXi virtual machines performance issues

  VMware KB: Troubleshooting problems of network in a vSphere environment performance

  VMware KB: Determine if the VM and ESX host blocking problem is caused by hardware issues

  VMware KB: Performance high on Windows virtual machines network latency or poor network

  VMware KB: Performance of local storage of the poor for VMware ESXi/ESX troubleshooting controller

  VMware KB: Using esxtop to identify problems of performance of storage to ESX / ESXi (several versions)

  Performance - main list links

  Kind regards

  P.

• Safari is very slow after downloading the latest IOS on my MacBook Pro

  Safari is extremely slow after downloading the latest IOS on my MacBook Pro. Can we do anything?

  It was very fast.

  IOS is not running on a MacBook Pro. Do you mean that you went to El Capitan?

  When Safari is running slowly? When? What sites? Force Quit Safari and then start it again while holding down the SHIFT key. If Safari works as expected, then remove your installed Safari extensions. Restart Safari normally and add your extensions one by one until the slow back. You have now identified the extension at the root of the problem.

• Extremely slow Boot Up After installing HP Deskjet F4280

  I am running Windows Vista Home Basic with 2 GB of RAM.  I have a few days ago I intalled a HP Deskjet F4280 all-in-one.  Since that time I am experiencing extremely slow start when I start my computer.  Things move along fine until I get to the Welcome screen.  That stays on for about 30-45 seconds, then I get a blue screen that remains as long as two minutes.  After the end of the boot system, everything seems to work normally.  I played a little bit and found out that if I turn user account control, I get a normal startup.  Any help will be appreciated.

  1. click on the start menu and click on "Run" and type "services.msc" and press the Enter key.
  2. in the Services window, locate the HP CUE Device Discovery Service and double-click it.
  3. you should find something that says "Startup Type" Who put in "manual".
  4. click on the button "Apply" and close all windows.
  
  Or if you want an alternative, then turn off UAC. It's annoying as hell anyway!

• Extremely slow performance after recovery disk restore.

  Machine: Dell portable computer. Router: Netgear. Cable modem: Ubee. OS: Windows 7 Professional Pro. Usage: homepage.  Background: download software WiFi of Mrs Webb Page. When I tried to reboot the system has been compromised and would only boot from the recovery disc after a complete restoration of the self made restore disc. Made several attempts to recover from internal disk using restore without success points.  These recovery discs were made in two years when the system was purchased and loaded. Problem: System is now extremely slow requiring min to access internet and min more than to get to yahoo mail and min more to call individual emails. Browse online or offline is painful causing a lot of pain. Assume total ignorance when you answer the question that follows: HELP?

  If the system is really slow on its own without worrying about all things Internet that I'd work on that to know first since you said "Browse online or offline is painful."

  Dell made a lot of laptops to do so that we can see what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  For the Canadian Techtdo this:

  Expand components, storage, click on disks, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  Sooner or later, it would be nice to have a list of your startup items so while you wait to do this:

  Download and install the free version of CCleaner here:

  http://www.Piriform.com/CCleaner

  CCleaner will want to install an additional startup item in your configuration (that you need not) on the first Setup screen remember to choose to customize the installation and make it look like this, then install CCLeaner:

  

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text file on your desktop with a name you remember - something like startup.txt

  Save the text file startup information to your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad) and select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl + C) then paste (Ctrl + V) the contents of the startup list of back here in your next reply.