ReadyNAS 102 extremely slow after upgrade to 6.4.1

Similar Questions

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.

• Why illustrator cc 2015 went extremely slow after the last update?

  Why illustrator cc 2015 went extremely slow after the last update? Someone knows how to fix this?

  Envoy! Thank you

  preferences to reset/delete the AI seems OK for now

• Access slow after upgrade

  After the upgrade to Firefox 36, extremely slow-start up - the hourglass comes on, then off, then finally in the left corner 'New tab' appears and finally get my home page. A previous version of Firefox loaded almost immediately. I have Windows 7 and use Norton.

  Hi boomerk, other users have reported that this problem was caused and can be solved by adjusting the parameters of their norton running affected systems software: https://support.mozilla.org/en-US/questions/1048938#answer-696520

• iMac mid2014 work much slower after upgrade of sierra

  After the sierra updated imac start and stop many more slowly, also after starting all work extremely slow even the menu open after right click of mouse!

  Difficult Installation of OS X

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.

• Smart Sharpen extremely slow after update CC2015

  I like the sharpness was working a lot, all ok in Photoshop CC2014.

  But after the update to CC2015 it works extremely slow.  Rendering final, but for all the actions in the smart sharpen box.

  Like this, this is not really useful more

  Have tried uninstalling and reinstalling, nothing helped.

  7prof 64-bit Windows.

  Why is this?  What can I do?

  I have it!

  I turned on "Use Open CL" in preferences / performance / settings of GPU

  Now, it's fast as hell

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• WTR320N still slow after upgrade

  Today, I upgraded my LAN 10/100mbps to 100/1000 Mbps Wireless LAN using the Linksys WTR320N with. The initial tests took place without problems. The small local network set up with 2 laptops, router and modem worked well and I plugged in the other systems.

  During the test, the speed of the internet was as before, instantaneous loading of most of the pages (Facebook, Youtube, etc.) and reaches the maximum capable speed, which is 23MBps with a low ping about 30.

  Now, with the entire network, the internetspeed is not top 20MBps more, it sticks to 15-17, which is a loss of 6 Mbps on my connection. After checking on various topics on other forums, I upgraded the firmware of 1.0.0.3 for 1.0.0.4. Who gave a small improvement, but I can't yet reach my speed max, neither a decent ping and pageload time.

  I'm a cable internet provider that requires no password/username to log, so it is a permanent connection. MTU is 1500, and because I don't know what it is (I've seen the expression and change it to 1300/1350. a few times looking for a solution).

  No idea how I can speed up the loadtimes and the internetspeed?

  [EDIT] problems are both on cable in Wi - Fi. The signal strength of the wireless is maximum and never given wired connections problems before.

  Change the MTU to 1365.

  You have already updated the Firmware of the router.

  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset and wait for 10 seconds. Power cycle the router and reconfigure the router.

• First Pro CC extremely slow after the last update

  Creative cloud warned me of a new update a few days ago and I updated 2 days ago. At the old opening projects with the updated program, it imports the old projects and prompts me to save them as different files. All very well here. But quickly, I realized that it is extremely slow, collaborating with the update program. When I move the slider along the timeline, it takes a few seconds when the program will display the image.

  What is going on? I have a deadline and I need to return to work as soon as possible.

  Specifications of the computer:

  2.8 GHz Intel Core i7, 16 GB, OS X 10.9.5

  The common practice is to open a project in the version with which it was created.  Reinstall the old version.  You can have both installed.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• Why is my iphone 6 so slow after upgrade to ios 9.3.4?

  After that upgrade my iphone to ios 9.3.4 6 became incredibly slow and can barely connect to applications such as safari and youtube. I have tried several methods to resolve this problem, like resetting network settings, reconnect to wifi, reboot the phone and same reseting all settings. Reseting my settings also seems to fix the problem for about 10-20 minutes before returning to be very slow. I was hoping someone knew a hand permanently fix this problem is incredibly annoying.

  Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Extremely high after upgrade to Firefox 12 memory usage

  After I've upgraded to Firefox 12, I started frequently affected by hot air balloon Firefox memory usage extremely high (2-3 GB after a few minutes of navigation) light. Sometimes it will fall back down to a more reasonable level (a few hundreds of MB), sometimes it crashes (probably trying to garbage collect everything), and sometimes it crashes. Usually the thread crash cannot be determined, but when it's possible, it's in the garbage collection code ( https://crash-stats.mozilla.com/repor.../list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer * %2 js C + % 3A % 3Atypes % 3A % 3ATypeObject * 29% ).

  I managed to capture a subject: report memory when Firefox had about 1.5 GB and have attached an image.

  A couple of things I've tried. I have a lot of tabs open (although don't load it the tabs until the selected option is enabled), so I copied my profile, all kept my extensions enabled, but all my tabs closed. I then left an open page http://news.google.com/ and it worked very well for several days, while my original profile goes down several times a day.

  I also tried to disable most of my extensions, leaving the following extensions that I refuse to sail without:

  Adblock more
  BetterPrivacy
  NoScript
  PasswordMaker
  Views
  Priv3

  However, the problem still happens in this case.

  Don't know if this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

  Never knew what was causing the problem, but have disappeared since the upgrade to Firefox 13, accidents and memory pathological use.