Smart Sharpen extremely slow after update CC2015

Similar Questions

• Imports are extremely SLOW after update to 2015.3

  I am experiencing gruelingly slow imports, several minutes to 1 clip that, before the update was almost instantaneous. I produce a weekly and have a very solid workflow that is identical to each week. The only thing that has changed is the version of the first everything is technically identical to before including the clip length give or take a few seconds, format, codec ect. If I try to interact with the import dialog box, as in the move, it says "not responding" but will finally complete the import.

  There are a couple of new options... or of differences in the application of the old options... that can cause such things.

  Most probably one is "Enable accelerated H.264 encoding"... which seems to slow almost everyone... found here and as shown, I suggest to disable (uncheck) this option:

  

• Why illustrator cc 2015 went extremely slow after the last update?

  Why illustrator cc 2015 went extremely slow after the last update? Someone knows how to fix this?

  Envoy! Thank you

  preferences to reset/delete the AI seems OK for now

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• Sytem Slow after update

  My system is now very slow after updating my Windows 7 ultimate

  http://Windows.Microsoft.com/en-AU/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Optimize Windows performance

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.

• First Pro CC extremely slow after the last update

  Creative cloud warned me of a new update a few days ago and I updated 2 days ago. At the old opening projects with the updated program, it imports the old projects and prompts me to save them as different files. All very well here. But quickly, I realized that it is extremely slow, collaborating with the update program. When I move the slider along the timeline, it takes a few seconds when the program will display the image.

  What is going on? I have a deadline and I need to return to work as soon as possible.

  Specifications of the computer:

  2.8 GHz Intel Core i7, 16 GB, OS X 10.9.5

  The common practice is to open a project in the version with which it was created.  Reinstall the old version.  You can have both installed.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• Photoshop slow after update - Photoshop apos lento driver ultimo

  My Photoshop was very slow after the update released by Adobe. I wonder if everyone is fine and has the will, don't know the reason for the slowness.

  I wonder also has a way to reverse the last update because it is impossible to work.

  Thank you, Franklin Inácio.

  MEU Photoshop was muito lento apos a ultima atualizacao liberada pela Adobe. Gostaria of Saber is but alguem e assim esta is tem como resolver, nao sei o reason da lentidao.

  Saber also Gostaria to tem um modo reverter a ultima atualizacao POIS esta impossível trabalhar.

  Obrigado.

  Hi Liveincastle,

  Greetings.

  • When exactly your PS works slowly?
  • Do you use a Wacom?
  • Have what troubleshooting you tried so far?
  • Visit this link on how to restore the previous version.
    • How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Concerning

  Rohit

• Broken typekit sync after update cc2015

  Hello

  I'm on Windows 7 64-bit and after the CC2015 Typekit fonts update synchronization is no longer. The CC app is at 2.1.1.110.

  I tried:

  • Sign in and out of my account
  • Toggle synchronization of fonts (with a wait before turning on again)
  • Close and restart the application CC

  The app "fonts" is stuck on a welcome screen.

  I managed to fix it!

  I just closed and killed all Adobe services/processes, including CoreSync.exe etc, then I deleted all the files in my CoreSync folder and restarted the CC Manager, and it works!

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• Gray of menus in Photoshop after update CC2015

  After updating to the new photoshop a few days ago from many menu items will become gray after using it for a while. I need to quit and reopen to get menus.

  Given the right conditions never version of Photoshop will become gray of many menu items.

  Provide relevant information to get faster answers

  More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:

  • Product number and the version of Adobe
  • Operating system and version number
  • The full text of all error messages
  • What you were doing when the problem occurred
  • Screenshots of the problem
  • Computer hardware, such as CPU; GPU; amount of RAM; etc.

• extremely slow after the automatic update of Firefox 7.0.1. is there something wrong with how works the automatic update?

  It takes a long time for each time I try to go to a new page. the browser crashes just for awhile. It started after that Firefox auto update 7.0.1.

  Try this

  Type in the address bar

  Subject: config

  Accept the warning.

  On the page that appears, in the filter box, type

  Network.http.Max - connections

  Replace the value 32 (which is probably the value 256 in your case).

  Close this page.

  Restart the browser.