EliteBook 8440p wifi

Similar Questions

• EliteBook 8440p: WIFI BLUE but still no ads

  Good guys. I just got this laptop STRICTLY run autocad and do e-mail. Long story short. my light is blue, my button works so I can turn to Amber clour and black to blue, all the drivers are installed and so far (those of the site after typing in my model 8440 p) but when I go on manage WiFi networks 0 happen (I have 3 comps on mine that I write this and my phone is impossible) , as well as my other comps brought neighbouring signals.

  When I change the adapter setings

  Network connections Blutetooth has a red X (PILOTdevice Bluetooth (personal area network))

  Local is very well (with cord pluged into the model)

  Wireless network connection has a red X, but all the bars are full and green (Intel Centrino Advanced - N 6200 AGN DRIVER)

  3 wireless network connection is the same as above, red X, green bars (Microsoft Virtual WiFi Miniport Adapter DRIVER)

  * beep * guys, I do not understand any help would be appreciated

  Yes, I already did all that (through hours and hours of reading other forms). It wasn't the appropriate fix. At last I found on youtube and it was rather easy.

  computer resart

  Press ESC during boot

  go into the BIOS (F10)

  Click RESTORE DEFAULT

  Save

  output

  Bammmmmmmmm problem solved

  I tried the updated WLAN drivers and BIOS before doing this and nothing. It worked first try and takes only a few moments.

• EliteBook 8440p: Base system device problems

  I'm having a problem with the Base system device PCI bus 69, device 6, function 2 (code 28) on my Elitebook 8440p.

  I was working on my laptop and my Wifi says "no connection available. I made the necessary troubleshooting and landed on it.

  I've updated the paks, individually made chip so that other device drivers are updated and the system indicates that this driver is not available when I try to update. Any suggestions?

  Hello:

  You have need of this driver for the... base system device is for the reader who is not related to the Wireless does not.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873&swItemId=ob_79317_2&swEnvOid=4059

  If the Wireless does not work and you need a driver for it, there will be a labeled device network controller where you see the listed base system device.

• HP Elitebook 8440p: lack of "Audio device high definition '-win 10 (or 7/8/8.1?)

  Hello

  My laptop computer in question is a HP Elitebook 8440p

  Just upgraded to Windows Pro 10 x 64, and I managed to find the drivers for all of them, except a device.

  Under >

  > Sound, video and game controllers

  -"High Definition Audio Device".

  It has a hardware ID of:

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000

  I already tried to install:

  -IDT Audio Drivers

  -LSI High-Definition Audio (HDA) Modem

  -Intel Chipset Installation utility

  None of the foregoing has managed to get rid of the yellow exclamation power off the device under the Device Manager view.

  I had a few other devices where win 10 has not installed by default, and for drivers Win 7 seems to work very well, so I guess that the same is true with the one above - I just need to know what to install...

  Any help would be appreciated.  Thank you.

  Hello:

  You must manually install the audio driver Intel HDMI driver W7 Intel HD graphics support page for your laptop.

  Here is how to do this without messing up your graphics driver...

  First download and install this free utility for files... 1 file on the list is 64-bit.

  http://www.7-zip.org/

  Then, download and save the graphic driver Intel support page for your laptop.  Do not run it.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059 #tab1

  After downloading the above driver file, right-click on it and select 7 - zip from the list.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp64360).

  Once this is done, go to the Device Manager and click on the audio device HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.

• EliteBook 8440p: problems of Expansion RAM HP 8440p

  I recently decided to upgrade the memory on my EliteBook 8440p. After reading the form of RAM required, I bought one of these: http://www.ebuyer.com/737970-kingston-4gb-1333mhz-204-pin-cl9-ddr3-sodimm-non-ecc-unbuffered-1-5v-me...

  Once the new RAM is installed in the expansion slot, Windows will not start and crashes just on screen "starting Windows." Then I tried a test of memory using the system BIOS diagnostic tool, but the laptop either hangs around 35% (I left it there for about two hours), restarts, or stops altogether. I thought that I would give to the system try, repair tool but which caused also just the laptop restart. Curiously, when I check the "System information" tab the system diagnostics, the two RAM sticks are detected with current and accurate information.

  I contacted eBuyer, they sent a replacement out there, but I'm having the same problem again. So, I thought I would try to install new RAM in the internal slot instead (under the keyboard), but now I have a BSOD during the 'Starting Windows' screen, give me code error, "IRQL_NOT_LESS_OR_EQUAL"

  I read on some forums tech upward. One of them suggested runs what is called 'Memtest' at startup via the CD, I tried, but the laptop restarts only during the first passage of the test of memory (and of course some loops over and over again until I remove the CD).

  I'm starting to lose hope! Any help/advice/suggestions would be greatly appreciated.

  Hello:

  See this related post.  You must use a very specific memory in this model, or it won't work.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634/highlight/true#M335108

• Sound through DisplayPort on HP EliteBook 8440p

  Hello

  I have a HP EliteBook 8440p and with my adapter DisplayPort-HDMI I have connected the PC to my TV. HDMI and adapter cable is ready for both sound and picture, but Im receives no sound from my 8440p with this configuration.

  Does anyone have an idea? Maybe the 8440p does not support sound through DisplayPort? Not been able to discover this...

  Hope someone can help me :-)

  The solution is to install the drivers Intel(r) Audio display. If you need it email me and I will send them to you.

  steps to install:

  1. click on the flag high definition Audio Device

  2. turn to update driver

  3. I would like to choose which Driver to instal

  4. do you drive

  5. go to downloaded the location of the file and install

  6. without reboot needed.

  [email protected]

• HP ELITEBOOK 8440p: operating system

  Hi guys

  I need an OS to my twowarcash computer hand laptop hp elitebook 8440p and is there a free download of this out there? THX

  Jjay00507

  The answer to your question is - MAYBE!

  That the PC is preinstalled with Win7 or Vista, and go do an install of OS would be buying HP recovery media to restore to the factory settings.  It's not FREE, but it is much less than the US $100 or you would have to pay to buy a copy of Win7.

  Two problems with this good (that's what makes this a maybe):

  (1) version of the OS

  (2) availability of the recovery media

  (1) that the PC came with Enterprise, Pro and Home Basic to Win7 - and given that activation is version-specific, you need to restore using the same version.  This info should be on the COA sticker on the laptop.

  (2) HP is no longer a recovery media stocks for the Win7 PC, so a couple of other sites that you can visit are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Yet once again, that the media is not free, but the cost is far less than buying a copy retail.

  As for free - technically, Win10 is not free; Instead, it can be activated from an existing version of Win7, 8, 8.1 - if you need runtime access to a PC with one of these versions of OS to work in order to use Win10.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Elitebook 8440p:-ACPI\VEN_HPQ & DEV_0004 for Windows 10

  Hello

  I'm trying to find a driver for Windows 10 64 bit for this device that has this hardware ID

  -ACPI\VEN_HPQ & DEV_0004

  I have this on an HP Elitebook 8440p.

  Concerning

  Hello:

  You need this version of the driver for W10...

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.

• EliteBook 8440p: reset Bios Admin password

  I bought an opportunity elitebook 8440p on ebay, which seems to work very well. The free update of winows 7 Windows 10 has been super cool, until a Bios update has been made available and it was obvious that the previous owner had put an ADMIN of the BIOS password.

  After that download the new bios, and then all sorts of other "soft pack" and has spent 24 hours trying to install the new Bios, it is now clear that this is not the case not anytime soon!

  Can you please tell me what it will take to update the bios?

  @Garlicbreath

  You should have posted here soon hope its not too late.

  Contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.htm l

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-k fX4AVH8oTCbsOM4X9a? DL = 0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP EliteBook 8440p: memory modules RAM that actually work for HP EliteBook 8440p?

  Hi everyone again. I scoured these forums and others and can't find a definitive answer to the upgrade of my RAM memory.

  My system:

  HP EliteBook 8440p

  2.8 GHz Intel Core i7 M640

  Professional Win7 64 bit

  133 MHz bus clock

  BIOS: HP 68ccu, worm. F.11 (2010)

  Dual core, hyper-threaded (4)

  (?) Mobile Intel QM57 chipset

  According to Belarc Advisor, I currently have a 4MB of RAM Samsung under the keyboard module. The second location is empty.  First of all, more memory RAM is not sold in the UK? I know that the computer is capable of 8 GB and the Kingston modules, I just tried to install were 4GB each.  Sticks of Kingston are 8 GB (2 x 4), PC3-10600, CL9, 1.5V, 204 pins SODIMM modules and they do NOT work on this laptop even if they should.

  Has anyone found the secret of exactly which modules memory will work with this specific model of laptop? It is issues of density? Problems of tension? Am I missing a driver. I have to sing the thing while I install memory?

  Seriously, any help at all will be appreciated.

  Hello:

  Please read this thread, and I posted the memory you need to NewEgg if you live in the USA/Canada.

  The 8440p uses the same memory as the 6550 b.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551#M207994

• HP elitebook 8440p: Ricoh Bay8 controller

  Can someone tell me what multifunctional Ricoh Bay8 and it's a driver on my hp elitebook 8440p?

  Hello

  It is for the smart card reader. Please try (page 3):

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/EliteBook-8540p-installed-Windows-8-no-Windows-8-drivers/m-p/3356861#M170728

  Kind regards.

• No post after resetting bios HP Elitebook 8440p

  Good day HP,.

  I have reset the bios on an HP Elitebook 8440p, but after that it will not publish. The lights on the keyboard flash market / stop abit, and then it reboots constantly with no photo.  I removed the battery, hard drive, tried other types of ram, disconnected the bios battery for a while (under the keyboard).  Sometimes it starts with no picture on the screen but fan is completely and stays on for a while.

  Any tips?

  Thanks for any help

  Kind regards

  Digimp

  Hello

  It seems that the customer has replaced with something matched ram (8 GB 1600 mhz crucial sticks). Ubuntu etc. would be fine and would install, however, anything with win7/win8 wouldn't work (and bios problems mentioned). Swapped the ram and everything works now.

  Sorry for wasting your time, and have a good weekend!

  Kind regards

  Digimp

• EliteBook 8440p: how to disable the internal Bluetooth Radio and use USB Dongle

  I use a laptop HP Elitebook 8440p who has an internal Bluetooth radio, but it is not the latest version.  How can I disable the radio and use a USB Bluetooth Dongle?  In addition, any thoughts on how to increase the Bluetooth range of the Elitebook my Creative Sound Blaster E5?   The E5 is Bluetooth 4.0 and the radio in the Elitebook 2.1 + EDR.  A range extender would be beneficial?
  Thank you
  Dave

  @ABQDave

  Go into the BIOS under the System Configuration.

  Then integrated device Options.

  You can disable it.

  REO

• EliteBook 8440p: 8.1 pro not Windows activation

  Hello!

  New Member to HP. A joined to get my problem sloved. I bought a second hand HP EliteBook 8440p laptop that has windows pro 8.1. The problem I face is that windows will not activate. The product key gives this error "error code: 0x8007232B.

  Hello @JK6 ,
  
  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
  
  Even if it is a Commercial product, here is a link to product activation. Your Windows 8 has been the already active and you do not need to activate again. Make sure that your edits were complete which could cause this problem. Anti-virus protection stops sometimes activation. I would temporarily disable it. Then try again.

  Thank you.