No post after resetting bios HP Elitebook 8440p

Similar Questions

• Help! Aurora R4 BIOS upgrade, post after reset CMOS

  In preparation for the installation of my new GTX970, I decided to update the bios on my R4 Aurora. I started bios a02 and upgraded to a05. Restart the new bios could not find my HARD drive. I ran the software post-diag and checked everything very well, my HARD drive was in the list and was checked off as OK. My hypothesis was that something was wrong with the upgrade of the BIOS so I decided to reset and start again...

  To reset the BIOS, I swapped the CMOS of 1-2 and 2-3 Horseman after 10 seconds. Now, when I try to start the screen is black and I get the error beep 5 (resettlement or replace the CMOS battery).

  That's what I did to try to fix it until now:

  • Reinstall the CMOS battery
  • Pull the CMOS battery, sauter jump reset, then replace CMOS battery
  • Replace the dough CMOS (new battery)
  • Disconnect all components except for the video and the RAM, battery CMOS replace
  • Disconnect all components except for the video and 1 stick of Ram, reinstall the CMOS battery

  After that each rider reset the pc starts to boot up, then after a few seconds will restart. When it restarts I'm stuck at a black screen and 5 beeps.

  Update! I reinstalled everything once more and now I get video and there is no more than beep. But I'm stuck on the screen of the Intel Rapid Storage Technology technology and cannot continue.

  I tried pressing f12 during the boot and could not enter the boot parameters.
  By pressing the shortcut of on the intel RST screen does nothing.

  Thank you all. It turns out that all I had to do was to change the hard drive in legacy mode and it starts fine.

• How to reset the HP Elitebook 8440p bios admin password

  I bought this used and update the bios. It doesn't let me do unless I give him the admin password. How to remove the password?

  SOLUTION: This is what I did and worked like a dream. Contacted HP, told them the problem. They "rise of the case," took my info. The next day, I sent a file called SMC.bin. It is formatted specifically for my machine to match the UUID. A file copied to FAT 32 format USB key, started in accordance with the instructions of e-mail, password bios reset.

  I did it via the cat on the HP website.

  Screw with the bios battery will not work on Elitebook...

• EliteBook 8440p: HP Elitebook 8440p BIOS

  Hello

  Last week, I checked the updates to the bios for elitebook 8440p of the of my father and I saw 2 different entrances, f.13 (2011) & f.50 (2014). Subsequently I have updated BIOS F.12 F.13 to without any problems.

  I hesitated to update with F.50 because when I checked the F50 revision history, I saw that this goes back to F.21, nothing is mentioned about F.1* series.

  So, is it safe to update with F.50 or is it for some other versions of 8440p (if there is)?

  Thank you.

  Hello

  Thanks for posting on the HP Forums.

  To get your question more than exhibition I suggest you post in the trade forums since the Elitebook 8440p is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP EliteBook Notebook PC 8440p

  I hope this helps!

• HP EliteBook 8440p: BIOS of HP EliteBook 8440p administrator password

  Please indicate the BIOS HP EliteBook 8440p administrator password. If this isn't a solution, kindly suggests the following method to resolve the problem on my system. During commissioning, it says "non-system disk or disk error Replace and strike any key when ready".  What could be the problem? and what should be done?

  suhails111 wrote:

  Please indicate the BIOS HP EliteBook 8440p administrator password. If this isn't a solution, kindly suggests the following method to resolve the problem on my system. During commissioning, it says "non-system disk or disk error Replace and strike any key when ready".  What could be the problem? and what should be done?

  There is no default for the BIOS administrator password. It is not intended to be forgotten if defined.

  Books of business as your class have stricter security than the class of consumer notebooks.

  You can try the utility on this link at your own risk.

  https://forums.Hak5.org/index.php?/topic/31526-HP-probookelitebook-BIOS-password-reset-utility/

  Otherwise, the BIOS CMOS chip will be replaced to remove the password.

  "He said during the introduction of the" non-system disk or disk error Replace and strike any key when ready '. "."

  The operating system BCD store may be corrupted, the hard drive has not, or you have a USB stick plugged into a port. There are a number of things that can cause this error.

• HP Elitebook 8440p BIOS

  Hello

  Last week, I checked the updates to the bios for elitebook 8440p of the of my father and I saw 2 different entrances, f.13 (2011) & f.50 (2014). Subsequently I have updated BIOS F.12 F.13 to without any problems.

  I hesitated to update with F.50 because when I checked the F50 revision history, I saw that this goes back to F.21, nothing is mentioned about F.1* series.

  So, is it safe to update with F.50 or is it for some other versions of 8440p (if there is)?

  And if it is safe then why I see both F13 and F50?

  Thank you.

  I see, my bad. I remember seeing some people by the name of HP, so thought they were the HP guy.

  If I understand correctly in order to get the support I need to have a guarantee, right?

  If so, he has been out of warranty for years.

  While you have anyhing in mind outside throwing the die with F.50?

  No idea why two separate files from the bios? Do you share my concerns?

• EliteBook 8440p: reset Bios Admin password

  I bought an opportunity elitebook 8440p on ebay, which seems to work very well. The free update of winows 7 Windows 10 has been super cool, until a Bios update has been made available and it was obvious that the previous owner had put an ADMIN of the BIOS password.

  After that download the new bios, and then all sorts of other "soft pack" and has spent 24 hours trying to install the new Bios, it is now clear that this is not the case not anytime soon!

  Can you please tell me what it will take to update the bios?

  @Garlicbreath

  You should have posted here soon hope its not too late.

  Contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.htm l

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-k fX4AVH8oTCbsOM4X9a? DL = 0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Reset BIOS password in TPM on HP EliteBook 8440p

  Hello

  my colleague disabled somehow BIOS on HP EliteBook 8440p.

  Please help me how to reset the TPM module.

  I can connect to the BIOS but BIOS password all changes are greyed out.

  Thanks for any advice.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you.

  This is to inform you with all professional like Probooks HP laptops or EliteBook stricter security that the consumer models infact they don't produce 'stop codes', the password cannot be derived from the serial number and the code is stored in a memory not volatile to remove the cell RTC resets not the password in this case.

  Please take a look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  Please Contact HP Business Notebook of support they should be able to send a SMC.bin custom file that you can use to reset the password at startup.

  Hope this helps, for other queries in response to the post and feel free to join us again

• EliteBook 8440p: Reset TPM or Clear BIOS password administration

  Hello everyone.
  I have the HP Elitebook 8440p with password on the bios.
  I will be tried all methods to reset the TPM module, but all my attempts have failed.
  If you know how claire TPM on my laptop please tell me.
  Best regards, Ivan

  It dose't work

• 639409-011-notebook PC: how to reset the admin BIOS in Elitebook 8560p (very important)

  Dear HP teams & forums,

  I need your help for my laptop Elitebook 8650 p in my problem (reset BIOS admin) because I do not know this password and this very big deal for me.

  I really appreciate your collaboration with me, please advise.

  Best regards

  AlattAR

  Contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.html

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• EliteBook 8440p: Reseting graphics card

  Hello

  I recently took an EliteBook 8440p, updated from an older model. I use this machine to play Eve Online while traveling. The problem I have is with the graphics card, it keeps reseting when some parts of the game to the top load, in particular, whenever my character in the play jumps through a wormhole, or a door of the stars, the game crashes, the screen goes black, gets and I get a message saying that card graph reset It's very persistent... I have already contacted the customer service at this topic and updated all the drivers for this machine, nothing has had no effect. The old version of this machine I upgraded to run Eve Online without any problems at all... Why am I having this problem with a newer model?

  Nevermind, I decided to throw this piece of s * in the trash and buy a new computer laptop from another manufacturer.

• EliteBook 8440p: problems of Expansion RAM HP 8440p

  I recently decided to upgrade the memory on my EliteBook 8440p. After reading the form of RAM required, I bought one of these: http://www.ebuyer.com/737970-kingston-4gb-1333mhz-204-pin-cl9-ddr3-sodimm-non-ecc-unbuffered-1-5v-me...

  Once the new RAM is installed in the expansion slot, Windows will not start and crashes just on screen "starting Windows." Then I tried a test of memory using the system BIOS diagnostic tool, but the laptop either hangs around 35% (I left it there for about two hours), restarts, or stops altogether. I thought that I would give to the system try, repair tool but which caused also just the laptop restart. Curiously, when I check the "System information" tab the system diagnostics, the two RAM sticks are detected with current and accurate information.

  I contacted eBuyer, they sent a replacement out there, but I'm having the same problem again. So, I thought I would try to install new RAM in the internal slot instead (under the keyboard), but now I have a BSOD during the 'Starting Windows' screen, give me code error, "IRQL_NOT_LESS_OR_EQUAL"

  I read on some forums tech upward. One of them suggested runs what is called 'Memtest' at startup via the CD, I tried, but the laptop restarts only during the first passage of the test of memory (and of course some loops over and over again until I remove the CD).

  I'm starting to lose hope! Any help/advice/suggestions would be greatly appreciated.

  Hello:

  See this related post.  You must use a very specific memory in this model, or it won't work.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634/highlight/true#M335108

• HP Elitebook 8440p i7-720QM: try to activate "AMT Quick Setup (Ctrl - P)" I get "Condition of dependency is not satisfied.

  I last Using BCU 4.0.13.1)

  And I've made visible cant ' t "Prompt(Ctrl-P) of the AMT configuration" message in the BIOS.

  And I can't find "Intel the CIRA" anywhere.

  But on the second laptop, all right.

  Anyone? How to turn it on?

  Maybe this Elitebook 8440p didn't vPRO/AMT (intel ME)? How to check?

  I use the bat file:

  biosconfigutility.exe /npwdfile:"password.bin"
  biosconfigutility.exe /cspwdfile:"password.bin" /advanced /set: P.txt
  biosconfigutility.exe /cspwdfile:"password.bin" /nspwdfile:""
  

  with this file: P

  English
  
  Firmware Verbosity
      Disable
      *Enable
  USB Key Provisioning Support
      Disable
      *Enable
  Firmware Progress Event Support
      Disable
      *Enable
  AMT Setup Prompt(Ctrl-P)
      Disable
      *Enable
  Initiate Intel CIRA
      Disable
      *Enable
  

  And I have this newspaper)

  Spoiler (Highlight to read)

  C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /npwdfile:"password.bin"
  
      
      
      
  
  
  C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /cspwdfile:"password.bin" /advanced /set:P.txt
  
      
      
          
          
      
      
          
          
      
      
          
          
      
      
          
          
      
      
          
          
      
      
      
  
  
  C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /cspwdfile:"password.bin" /nspwdfile:""
  
      
      
      
  
  

  "C:\Downloads\HP BIOS Configuration Utility > biosconfigutility.exe /npwdfile:" password.bin' C:\Downloads\HP BIOS Configuration Utility > biosconfigutility.exe /cspwdfile: "password.bin" / advanced/set.txt C:\Downloads\HP BIOS Configuration Utility > biosconfigutility.exe /cspwdfile: "password.bin" /nspwdfile: "" .

  Finally!

  Everything is easy.

  Make bootable USB with HPDMI and boot and same time pressinf power button with key ' Buy ' '<" "="">'.

  On the screen with the logo - you will see the Red messages.

  Press F9 and boot in DOS and run:

  cpqamt read
  cpqamt write reset
  cpqamt write unlock
  cpqamt write on
  rem cpqamt write lock
  cpqamt reboot
  

  After it enable you in the BIOS everything - TPM and vPRO.

  details, see also:

  Spoiler (Highlight to read)

  http://www.compit.se/?p=206
  and he:
  http://Forum.NotebookReview.com/threads/HP-EliteBook-2530p-owners-lounge.407993/page-35
  http://Forum.NotebookReview.com/threads/HP-EliteBook-2530p-owners-lounge.407993/page-44
  http://Forum.NotebookReview.com/threads/HP-EliteBook-2530p-owners-lounge.407993/page-45

• EliteBook 8440p: Elitebook MB error starting on docking station!

  I have Elitebook 8440p and docking station.

  Docking station works well - because of the other laptop works fine with it.

  When I restore default BIOS or Hard reset BIOS - to the first laptop runs on the docking well.

  But next time, laptop does not start on this Doc station - 'caps look' and 'numlook' will Flash 5 times (such as error MB)

  And without docking station, everything works fine.

  I'm starting separately witouth laptop docking and after I put on the docking station.

  It's very uncomfortable disconnect the laptop with reset every time! (

  And launch on the doc for several station are second slover - is this normal?

  Maybe there is a problem in ME BIOS region (last F.50)?

  One, a crazy idea?

  Yes! A lot of things ME region.

  I assembled new BIOS complete with own Intel ME region and first start on Dock Station and everything is done!

  Now everything works. AMT/vPro, TPM and Doc station.

  P.S. Does anyone have Original Full Flash Bios (8MB) for the flashing material?

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.