Elitepad 1000: navigation & new installation 8.1 (after 3FO HDD) Win

Similar Questions

• Envy 17 t: How do factory reset on a new HD to Win8 after upgrade to Win 8.1?

  Sorry in advance for the confusing explanation!
  My hard drive recently started to crash my laptop and after a few searches using the diagnostics in the bios, I realized that it was defective. I thought I was lucky cause I made a recovery from USB, however, I did after my PC upgraded to Windows factory installed Windows 8 8.1! The upgrade was in a day or two after, I started to use my laptop and I do not do the recovery disk before upgrading!
  Now that I have installed my new HD and USB to load Windows 8.1, Windows asks me to activate Windows! Apparently if you install 8.1 Windows from a recovery disk on a PC provided with Windows 8, you need to activate it!
  So, the answer is that I somehow instal Windows 8 on my laptop on the new hard drive and then upgrade to Windows 8.1! Apparently, if you make a recovery 8.1 on a PC USB disk that has been upgraded from Win8, then a version of win8 is included on the DISC of RECOVERY USB. I can't find any way to install Win8 on my new drive hard using the recovery USB disk that I created after I updated my PC! There is no help anywhere about this problem, a nice person can you please help?
  I still have my original hard drive with partition recovery still on it, and although this hard drive crash the laptop regularly, I still might be able to make some kind of recovery USB or DVD using, if only someone could kindly help me to do so.
  I have to install two hard drives in laptop but the cable and caddy to do this is VERY expensive here in the United Kingdom and it will take a few weeks to get from the United States. Despite this, I really don't know what to do even if I had two drives connected to the laptop at the same time!
  Thank you very much in advance for any help you can give me.

  Hello
  Just as an update...
  If you buy a PC with an operating system already installed on it and it upgrades before making a recovery media, you can recover to the upgraded operating system because windows will ask you for the key. If like me, you did not receive a key, just the operating system on a hard disk partition, and if that hard drive crashes, you're completely banjaxed! I bought my laptop HP in the United States, the United Kingdom HP, although very useful, would not give me a recovery media for my PC because it was American and HP in the United States would not be me send them because they are not allowed to send overseas. In the end, I had to call Microsoft and literally had this were begging for almost 2 hours, and after making me literally try every little thing that I had already tried several times by myself, they basically told me that I had to buy a key that would cost me about £200 for Windows complete 10! Finally, after a lot of explanations, they really gave me 'once only' keys for win10, so I now have a fully functional win10 BONE, but if something should go wrong again, I have to pay to buy a new. Fair enough, I suppose, a little warning to those of you who bought a computer laptop win 8 and immediately improved to win8.1, they will say that win 8 will appear on your media recovery as well as 8.1, but my media was only 8.1 victory! Worthless, unless you have a fully functional key!

• Satellite Pro 480cdt - installation of Win98 after Replacement HDD

  :| What a fight! I have a Satellite Pro 480cdt.
  It came with no disk working...

  I have now repackaged in floppy drive, and an external cdrom connected using an external enclosure.
  I bought a HDD refurbished for the machine, it arises in the caddy, and now the machine is equipped with discs.

  The HDD is empty, but I have a cdrom in windows 98, so put in the drive, the message "insert disk in the drive system, then press any key..." So I put the CD in and also to put a downloaded in the floppy drive boot disk.

  He is now asking me to remove all the drives and media and press any key!
  Magic! How to bypass it little or no budget! (I'm retired)

  I think it's done... It seems that the backup disks 98 to my last computer was faulty, so all this happens for an it expert to sort... And if it does not, it goes on the bonfire!

• Symbol ban after new installation on new SSD

  Hello

  A few months ago, my original HD failed (MacBook Pro (13-inch, mid 2012)).

  I decided to replace it myself with a SSD instead.

  the thing is, every time you start, I get the symbol ban for a few seconds until sometimes for hours, but once the start is done - everything works perfectly.

  tried to replace the disc SSD 3 times now - the same result after each new installation of recovery of the internet.

  Currently, using SanDisk Ultra II 240 GB.

  Any suggestions?

  Thank you!

  The symbol you see means that the computer did not find a bootable system disk and sometimes occurs when you have not set up a default startup disk. Go to System Preferences, and then select Startup disk. You should see your SSD in the window. Select it after you unlock the preferences.

  The strange thing is that, if this is your problem, it must be solved in seconds - certainly not hours. This would suggest there is something more complex. You say that you tried to replace the SSD 3 times. Different drives? Different manufacturers?

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• Function of scrolling of the mouse after a new installation.

  Hello, when I got my laptop (m6 1125dx Envy) I had a nice feature that allowed me to scroll through the pages under the mouse cursor when the page is the subject of a scroll is not the current page. It was great when look a things side by side and comparing elements. Having to click on a window to make it active just to scroll is a pain. This is a default feature in ALL linux distributions and I missed a lot when I'm on windows.

  When I got this laptop windows 8, I found that I had this feature. I was happy to extreally. After awhile, I reloaded my operating system with a new installation of windows 8 and noticed this feature is now gone.

  I installed all the drivers and the software that was in the file "c:\SWetup". I've updated all the drivers from the HP website. Still no scroll mouse of pages under the cursor.

  I know there are applications of third party like katmouse and others who do this, I tried them and they do not seem to work in windows 8.

  It's something that came with the laptop. Can someone give me a helping hand for this feture back?

  ChangedSoul,

  You can enable mouse Hover in two ways:

  Windows key + U (open access) >

  If you have not previously opened the ' Centre

  then

  Uncheck both "always read this section aloud" and "always this section analysis.

  Select / Open "Make the mouse easier to use" >

  Under "Make it easier to manage windows" section >

  CHECK "Activate a window by hovering over it with the mouse.

  Ok

  -----------------------------------------------------------------------------------------------------------------------------------

  Comment

  This method should work, and if this is the case, it will also be enable the development by mouse and POP before the window where you point your mouse.  Frankly, I find it irritating.

  More likely, because you're in the Linux world, looking for likely action "Set mouse without Pop" first defined in Unix all these years and then moved to Linux as the obvious of the window control decent method.  Yes, I'm a little prejudiced, but only a little.  The smile.

  Glide mouse (no window pop) to Windows 8 is easy to configure. It requires a simple registry hack to set the mouse Hover in place.

  Windows key + R > regedit > OK

  Once you have full registry > export a copy of the register to your favorite folder

  Open key HKEY_CURRENT_USER\Control Panel\Mouse

  Change the value of REG_WORD ActiveWindowTracking to 0 × 0000001 (1)

  Open the key HKEY_CURRENT_USER\Control Panel\Desktop

  Change the value REG_BINARY UserPreferencesMask, MSB (most significant byte or the first value in the chain), at 01

  Example:

  The FIRST value of the string can be 41, which displays the front window > change the value 01

  The FIRST value is perhaps 9f > replace the value 01

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  OPTIONAL:

  If you want to slow down the reaction of the constant focus, you can add a delay to the duration of the window to change the focus after the mouse is moved.

  Key HKEY_CURRENT_USER\Control Panel\Desktop

  Change ActiveWindTrkTimeout REG_DWORD > a value you like

  Examples:

  0 × 00000080 (128ms)

  0 × 000000c8 (200ms)

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Save and exit >

  Restart / reboot the system and log on

  Fact!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• missing drivers after new installation of w7 Ultimate 64 bit on HP Pavilion

  The title says:

  "pilots missing after the new installation of w7 Ultimate 64 bit on HP Pavilion.

  It is a Pavilion dv6 1341eo.

  The missing drivers from, said hwat Device Manager is:

  Base system device

   

  " Bus PCI 6, device 0, function 1 "

  Hardware ID:

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

   

  Peripheral basic system (2)

   

  " Bus PCI 6, device 0, function 3 "

  Hardware ID:

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

   

  Peripheral basic system (3)

   

  " Bus PCI 6, device 0, function 4 "

  Hardware ID:

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

   

  Unknown device

   

  ' on Intel (r) "ICH9M LPC-interfacecontroller - 2919".

  Hardware ID:

  ACPI\ENE0100
  * ENE0100

   

   

   

  Anyone please... Here is the driver for these devices?

   

   

   

  Hello:

  The first group of ID you posted with 197B is the JMicron card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75661-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  The other is the ENE CIR receiver that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75664-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  Paul

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• 123 updates is normal after a new installation.

  I recently bought a desktop computer with a new installation of windows xp with sp3 custom. When I tried to install updates, I was getting a 403 error. I have used ie fixit to sweep the update section and he finds the problem and he healed for me. But when I was able to download and install updates there was 123 which has shown all at once. They have installed ok and the computer seems to work very well, but I would like to know if it was normal that 123 updated if poster altogether even after a complete re install. Thank you.

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/403-forbidden-access-is-deniedyou-do-not-have/4732a91a-1594-4516-90c8-bff4051c2eb8

• Can I request a new installation for Vista disk and drivers of my laptop after formatting my hard drive?

  I have a stubborn reality and impossible to get rid of the virus on my main hard drive and I think to format and to nine.  I want to know if there is a way to get a new installation of Vista for a clean install disc and a disk for the drivers of my laptop.

  Other info: number of grain of Vista is ripped but I have the model number for my laptop if that should be necessary.

  Hello

  After you have lost your product key shrinks your methods

  key finder programs won't asssit you if it is preinstalled

  Here are the different ways let you reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Restore backup files after the new installation of Vista

  I recently had to replace my main hard drive as it has completely crashed and burned.  Fortunately, I thought, I had been diligently backing up to an external hard drive.   So after replaced by a fresh hard drive and a new installation of Vista, I thought I could just restore these files from backup... but no luck.  New Vista does not recognize the old Vista backup.  And it will allow me to migrate these files in any usable fashion.  Is it possible for me to get the new Vista installation to access these backups from the previous installation of Vista?

  Hi Allisonerik,

  (1) what happens when you try to restore?

  (2) you get an error message?

  (3) was it a file, or a backup system image?

  I want to clarify if your backup media (external hard drive) is recognizing in Windows.

  Method 1: Put the computer to boot and then check to see if you can restore

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: Check your external hard drive to find errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  See the links below

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro update is not after the new installation

  I know that this question is asked many times, but I tried pretty much everything that is suggested and nothing seems to work, some worked for others, but they have not worked for me.

  I have replaced a failed hard drive on a Lenovo X 200 an old laptop that I was giving away he a son of friends who needed just for the College.

  I stuck in an SSD and saw genuine window 7 Pro licenses as was previously on Vista, I made a new installation as I've done a hundred times before, and then as always update windows first, but I'm just update Windows scroll bar I left it all night nothing happened.

  I tried using the Microsoft Easy Fix times nothing.

  I tried Windows Update Agent still nothing.

  I tried a suggestion here that seemed to have worked for others install (KB3102810) I did as stated on this occasion, he worked told him there are 225 updates and 18 in option more, I jumped in option one it seemed to work very well it installed just 13 with the lack of rest I restarted as requested but recede in windows it says Windows is up to date, that was impossible.

  I clicked on update again and it does what it was originally just to get the scroll bar that I left for hours and nothing, this is seriously my head in, I think that Microsoft is not going like it the impression that I'm being bullied by installing Win 10 and the person wants to win 10 , because they prefer to Win 7.

  Please could someone help me on this pickle was on this thing now for almost 2 days of installation then put in solid form and re install all to nothing does not.

  I would seriously some knowledge on it.

  Concerning

  It was pointed out Alan

  Ken Morely has the solution.   Follow precisely...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/following-a-clean-install-Windows-Update-remains/ff3c442e-79a6-40d3-AC35-29e130cebef1

  I've used several times, as many others have, and it does not have the problem you describe.

  Install all that it offers to the exception updates Windows that are not labeled security and are dated after 2014.  The reason is that all those who since have no value to your system and prepare your system to accept Win10 and provide information to Microsoft.

• TextMode/BIOS startup slowed 15 ~ 20 x after 7 Win-New Installation

  Hello

  My company received a S10 - 2 (Windows XP Home OEM) as a gift after buying an x server IBM 3650.

  As my company is moving to Win 7, the following has been achieved in the order:

  (1) the removal of all the partition (including the quick start, the recovery and the WinXP partition)

  (2) new installation of Windows 7 Pro

  (3) office Pro 2 k 3, NetOp comments

  (4) Win 7 patches of my enterprise WSUS server

  (5) replaced 1 GB Ram to 2 GB (DDR2 3500 at 667 Mhz, 1.8V)

  (6) latest S10-2 bios (rev 22)

  (7) driver Win 7: NIC and Intel GMA950

  TextMode startup slowed considerably after step 3) - even the line of underscores ('_') blinks 10 - 20 times slower. Generally, it takes 15 minutes to start GUI of Win 7.

  Despite the slow start, speed/performance of S10 - 2 is acceptable once started in GUI from Win 7. Experience Windows Index of the RAM, HARD drive and the processor is an average of 3 ~ 4 with lower graphics to 2.2.

  I tried the following but not vain:

  (1) replace the 1 GB of RAM

  (2) reinstall the following: drive HARD, RAM and WiFi

  (3) update the BIOS Rev 22 (step 6)

  4) to update drivers Windows (step 7)

  I also met the next post which suggests to disable "Quick start" I'll try tomorrow (after the English description):

  http://crashsource.de/114-Acer-insydeh2o-BIOS-Kaltstart-friert-bootvorgang-ein/

  Please please advise what can be done before I have refer to Lenovo.

  Any help and suggestion is greatly appreciated ;-)

  Hi all

  The problem seems to be fixed after you install the latest driver from Intel storage matrix. The startup time down 15 minutes to 40 seconds.

  It seems that the BIOS EFI is very sensitive even to drivers used by Windows?

  Kind regards

  Titus

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF