em12c cannot instance of discovery on the host database

Similar Questions

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• vSphere cannot connect after time on the host change

  I am a relative noob when it comes to virtualization.  I did a lot of research for the response, but can't find it.  Maybe you guys can help.

  Connected to the host (VMWare vSphere for ESXi 4.0) management console, I changed the time on the host because he was distant.  After that, the vSphere console has become very slow, and when I clicked on another tab it has expired.

  I closed vSphere and tried to reconnect and now I have a message that says:

  vSphere could not connect with the server vCenter Server "[host IP address] '.

  Details: A connection failure has occurred (unable to connect to the remote server)

  I went directly to the physical console machine and press F2 to enter the system setup.  I restarted the management agent.  I can ping the IP address.  I can not connect via puTTy, but I do not think that I never activated the SSH access.

  Has anyone ever encountered this?  What should I do?  I can't restart the host right now because the production servers are running on the VMWare.  If I have to restart later, what is the correct procedure for this? (close the BONES of the VM, and then restart the host?)

  I had this happen before. I was unable to restart the services or navigate from the console. I waited until hours off-peak and connected directly in the less critical guest OS and stop them. I had to stop several before I could get access again vcenter. Once I had access i vMotioned the rest of the guests to other hosts and restarted the ESXi host. It's a risk, because if you cannot close machines you have to powercycle. You seem to have access, so you can be able to stop them from the CLI on the host.

• Cannot add raw lun if the host is connected to vCenter

  I have MS cluster disks in HP EVA4400. They are presented to my guests. If I self host then I can add raw disks in VM but if I add host to vCenter then the lun of the bullies appear no more.

  Probably, if I anyone these LUNS and present with different lun ID then they would appear but can't bring those LUNS offline.

  Anyone have idea where I should start to investigate?

  I think that what you see is the expected behavior.

  In a cluster environment, you can add a unit logic as a ROW only one number. While adding, a mapping file raw device called (vmdk file) is created. On the other node MSCS, you must connect to this mapping file (via Add existing virtual disk) rather than create another ROW.

  Access to the RAW LUN through multiple files for mapping (if you manage to somehow create them) could cause problems with locking and possible data corruption.

  André

• Cannot connect or ping to the host of the virtual machine of the DMZ or VPN

  Hello

  I'm trying to convert a physical machine to a virtual using the Converter Standalone Client.

  The machine that I am trying to convert is in a DMZ and is not a member of the domain.

  I installed the client, but it could not connect to host. I started to run tests and found that I can ping any machine on my local network on this computer in the DMZ outside the virtual machine host.  I got the firewall set to open completely (for the test) and that did not help either.

  I noticed a similar problem over the weekend when I VPN from home but couldn't connect using the Infrastructure Client or ping to my host, despite me being able to ping and connect to any computer on my network...

  I don't see anything in the config of ESXi that relates to this, and I am at a loss.

  And finally, I continue to see sites with linux commands to run in the ESX box to perform tasks, but I don't see how I run these. I have the cli installed, but it won't let me run some scripts .pl in the directory "/ bin" while I continue to see cited normal linux commands.

  Thanks (again)

  Hedley

  The extent of the lack of connectivity, it seems associated network/firewall. Out of the box nothing in ESXi should prevent communication if properly configured. I guess that since you can connect in some places that the connection is good and an appropriate IP address assigned to the interface.

  I would check your firewall rules to be sure nothing is blocked. Don't know what kind of firewall you use so no this cant of detail out of direct suggestions.

  Secondly, regarding the execution of orders, most of these commands you see is for full blown ESX. Out of the box, ESXi has a limited number of advanced features. The main difference in ESXi 3.5 and ESX is that ESXi is not a full blown service console to limit so task that you can perform.

  _________________

  Dustin Pike

  Wintel and ESX Admin

  VCP3

• Instance of change on the OEM database

  Hey guys,.
  I have 2 databases installed on my computer: orcl and orcl2, when I connect to the OEM, I am only able to connect to orcl.
  What should I do in order to connect the other DB with the OEM?
  
  Thank you very much

  user3646231 wrote:

  OEM can only handle a single instance.

  Is it even possible to 'switch' of the database currently manages OEM?

  delete/destroy repository existing
  create a new repository to take in charge the other instance.

  OEM is NOT necessary to install, manage, or run any Oracle instance.

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• WAMP and installed WA - gap DW now cannot make connections to the host

  I am learning PHP and recently installed WAMP to use a cart Web application help.
  
  Now Dreamweaver cannot establish a connection to the host. It gives six reasons why it can not connect:
  -The network cable is disconnected or the network is down. (It is connected and more)
  -The FTP server is down (it's towards the top)
  -The FTP host name is incorrect. (it's good)
  -The server using SFTP and the checkbox 'Use secure FTP' is not enabled. (he does not SFTP)
  -The server using FTP and the checkbox 'Use secure FTP' is checked. (The box is not checked)
  -Access to the server requires firewall that are not correctly defined settings. (requires no firewall settings)
  
  I had no problem before WAMP and gap.
  
  I get something dirty when I installed WAMP (Apache, MySQL and PHP)?
  Or is the difference in throwing things off?
  
  Nobody knows what could happen? I am at my wit's end and could really use him some tips.
  
  Sophie
  
  

  No problem. I think we all made purchases that seemed to be the right thing to do in time. It is without a doubt the nature of this game. You should see my shelf of books of 50 dollars I'll never watch it again. in any case, he is screwing with your regular ftp connection? on other sites? in this case it may be a firewall problem. try turning off your firewall for a second and connect. If that's the problem, you must have a problem with your installation. I use this server wamp without any problem:
  http://www.wampserver.com/en/

  for your localhost, simply save your files in the directory rather than trying to configure your remote site to connect to locahost.

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Why to the can't 'Shared VMs' does not allow to share folders with the host and why the copy/paste does not work on them? :-((

  I want to put in place a "build mini-server' for our team. Since VMware Player is not taken in charge more I had to use VMware Workstation, and with some success, I put things up. But now more and more surface of trouble!

  To enable auto-start for the virtual machines, they must obviously be "shared." But it looks like, with this, the nuisance that these virtual machines cannot share folders more with the host. And also, it seems that copy and paste does not work with these "shared VMs.

  Is there a work around to get these features also works with 'shared VMs?

  It is VERY annoying and tedious to always have to these VMs to shuttle between shared and non-shared mode just to be able to transfer data or new versions of code for them!

  Thank you for using the workstation. How to create a script with:

  WS t vmrun start "c:\my VMs\myVM.vmx".

  And add the script to the Windows Task Scheduler to run at startup.

• EM12c: Cannot find the House discovered for plugin id:oracle.sysman.db

  Platform EM12c:
  Oracle Enterprise Linux 6.2 (x86_64)
  Oracle Enterprise Database 11.2.0.3 (x86_64)
  Enterprise Manager Cloud control Release 1 (12.1.0.1) 12 c (x86_64)
  --------------------------------------------------------------------------------------
  Problem:
  EM12c > objectives > databases > add
  Discovery of targets on the host: mcsdbora1.esri.com
  mcsdbora1. ESRI.com - cannot find the House discovered for plugin id:oracle.sysman.db
  --------------------------------------------------------------------------------------
  Notes:
  -Mcsdbora1.esri.com host is "Microsoft Windows x 64 (64-bit)"
  -EM12c is on Oracle Linux 6.2 (X86_64)
  -J' downloaded the latest version of the software Agent before adding the host
  "" EM12c > Setup > extensibility > Auto Update "before adding the host" "
  -Mcsdbora1.esri.com host is listed under "EM12c > objectives > Hosts".
  
  I found these articles in the support.oracle.com
  
  "How to manually add targets to the database in 12 c Cloud Control [ID 1371846.1]"
  
  "How to deploy the latest Plugin from database to the WHO and the Agent in 12 c Cloud Control [ID 1388143.1]"
  
  This last article, says updated the plug-in "Oracle Database". I checked and I do turn more later 12.1.0.1 connect.
  
  I wonder if I can only solve this bug, if I upgraded to Bundle 1 Patch (12.1.0.2) and install the 'Oracle' plug-in 12.1.0.2 database?
  
  Thank you
  
  Marcelo
  --------------------------------------------------------------------------------------

  BP1 is required for the management of the goals of Windows. So, you need to first upgrade your Linux WHO to BP1 and apply a few spots on the top before you can deploy plug-in on Windows machines. Support can provide you with the details.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.