vSphere cannot connect after time on the host change

Similar Questions

• Cannot connect or ping to the host of the virtual machine of the DMZ or VPN

  Hello

  I'm trying to convert a physical machine to a virtual using the Converter Standalone Client.

  The machine that I am trying to convert is in a DMZ and is not a member of the domain.

  I installed the client, but it could not connect to host. I started to run tests and found that I can ping any machine on my local network on this computer in the DMZ outside the virtual machine host.  I got the firewall set to open completely (for the test) and that did not help either.

  I noticed a similar problem over the weekend when I VPN from home but couldn't connect using the Infrastructure Client or ping to my host, despite me being able to ping and connect to any computer on my network...

  I don't see anything in the config of ESXi that relates to this, and I am at a loss.

  And finally, I continue to see sites with linux commands to run in the ESX box to perform tasks, but I don't see how I run these. I have the cli installed, but it won't let me run some scripts .pl in the directory "/ bin" while I continue to see cited normal linux commands.

  Thanks (again)

  Hedley

  The extent of the lack of connectivity, it seems associated network/firewall. Out of the box nothing in ESXi should prevent communication if properly configured. I guess that since you can connect in some places that the connection is good and an appropriate IP address assigned to the interface.

  I would check your firewall rules to be sure nothing is blocked. Don't know what kind of firewall you use so no this cant of detail out of direct suggestions.

  Secondly, regarding the execution of orders, most of these commands you see is for full blown ESX. Out of the box, ESXi has a limited number of advanced features. The main difference in ESXi 3.5 and ESX is that ESXi is not a full blown service console to limit so task that you can perform.

  _________________

  Dustin Pike

  Wintel and ESX Admin

  VCP3

• WRT54GS cannot connect after reset of the router

  Hi guys, so I use this modem that my friend gave me, works very well in its place. I wanted to reset the modem for reasons that I can't remember. (I am connected via a modem cable btw). The internet was working fine when I paste like a leech wireless instead of him, but when he took the router and connected here, it wouldn't work. I mean, it shows that I am connected to the router but the router is not connected to the internet. I got hard reset and all 192.168.1.1 copy stuff MAC PC but it won't always connect to internet... can someone help me?

  He works now thx anyway

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• Cannot connect after withdrawal of a domain.

  Disjoint my domain to work and now it does not have one of my passwords to connect. Nobody here knows the identifier of the administrator because I was hired just to be the administrator. Where should I go from here? Is it possible to get around the login screen?

  Here is the solution to this problem from Microsoft:

  "You can not connect after you remove the computer from the domain.

  <>http://support.Microsoft.com/kb/317049 >

  HTH,
  JW

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• Lose the FTP connection after you put the computer to sleep

  I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.

  Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?

  The FTP queue time is set by your web hosting provider.  I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational.  You shouldn't have to restart DW well in order to get a connection.  Simply by clicking on the login button in the files panel should do the trick.

• Cannot connect after upgrade to version 7

  After the forced to version 7 upgrade I can not connect over a long time (microsoft account) to Skype. It displays the following error (see attachment).

  Can someone help me please? I can not connect to Skype for the first time in years, and really, I can't do without.

  

  Sorry, but it is not possible according to the name of an application partial to decide if it can be removed from startup or not. What I would do, is to use Google search to fing that made a particular application on your computer and see if it can be removed from the startup.

• 5.0.15 server: Cannot connect after reboot

  I've recently updated to Server.app 5.0.15 running on a Mac Mini Server 10.10.5. We use this server primarily for Open Directory and File Sharing/network houses for a school from K-12. Server.app worked well for about a month. In the last two weeks we have had issues with CrashPlan leave unexpectedly so I uninstalled and reinstalled. Server.app worked again very well. When reinstalling didn't work I reboot the server after hours and returning to the top of.app no longer recognizes my admin login, shake the window (Note: I can enter the system with the same credentials very well, I can just authenticate in.app).

  The error I get in the system.log is "we lost contact with the AuthService, we will need reauth. If I try to connect with the.app from another machine, I get the same error. I can log in Workgroup Manager and make changes and all the services seem to work (people can access files, authenticate with their login, connect to home network). I can also always connect file sharing via the administrator credentials. I deleted and reinstalled the.app that made no difference. Google Fu found that only one thread with this older operating system problem and the proposed terminal fix ('sudo launchctl load-w /System/Library/LaunchDaemons/com.apple.servermgrd.plist') does not work in 10.10.

  Any ideas? Naturally, this server is in production, and most of my next ideas would be more volatile. I have fortunately an archive enough recent our Open Directory, and we have a Time Machine backup of the system as well. Hoping that someone has encountered this and has an idea.

  Thanks in advance!

  Open a session?

• Computer cannot connect after upgrade to win 7

  I have a window of lapop run Dell 7 and after an update, to stop and can not connect the next day the model keep say bad password but the suspicion is correct for my PS. I did not create a password reset disk so now I can't use my computer... MS or someone please help thanks

  Hello

  You will have to return before updates, which is unfortunate.

  See if this helps you; the first part is what you must try as you say you know your password.

  Look at scenario 2

  And you should make a password reset disk before you forgot your password, not afterwards.

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  Note

  AS you can not use your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• BlackBerry Smartphones cannot connect to facebook at the moment

  Hello

  Just got a new BB Torch, but I cannot sign in the FB app, (I have a BB data plan AND wifi so it should be good...) I just get the error "unable to connect to facebook at the moment (error 100).

  I deleted and reinstalled, but in vain.

  Any ideas?

  Thank you

  Whenever I update to a new version of facebook (and be a beta-tester, I do more than most people), I'll have more often connection problems.  It says that it cannot connect so I just attendre, wait for a few hours, then try again.  I was able to connect each time, often on the second or third attempt.

  It's just a matter of waiting and try again later.  I heard that you log in to your Facebook account on your PC, then it tent from your phone could help, but I've never tried it myself.

  Maybe it's a situation where patience is a virtue.

• No wireless connection after you restart the computer.

  Original title: wireless connection problems

  Hello my name is justin knox my girlfriends computer mobile computer ASUS laptop with windows 7 each time you turn off the laptop and turn it on my wireless connections are not available for me unless I have help it how can I get this laptop to connect instantly without troubleshooting it powers on every time?

  Hi Justin,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you have any anti-virus program I suggest you disable and check if it helps.

  Note: Don't forget to activate once you have finished troubleshooting.

  You can also go through the steps and check out them.

  Method 1:

  Make sure that if the autoconfiguration WLAN service is set to automatic.

  1. click the Start button, type services.msc and press ENTER.
  2. scroll down to the autoconfiguration WLAN service, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  Method 2:

  
  

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  2. click on add and then click on manually create a network profile.
  3. Enter the network information.
  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  5 Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For more information visit

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  You can also turn off UAC (User Account Control) and check if the problem persists. After return from the status, so that we can help you better.

  Note: Don't forget to activate the control once you are finished troubleshooting.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• Cannot connect after install

  I just bought a new SSD with the intention of doing a fresh install of Windows on it. I downloaded Windows 8.1 installation directly from Microsoft Media on a USB key. I went through the installation, and it seemed to work perfectly well. However, when I started to install programs, I am essentially impossible to restart the computer. When I do, it attempts to load the login screen, but it is completely empty. I tried to reinstall Windows, and I am able to restart perfectly fine right after it loads everything first... but every time I try to install anything (Windows, Chrome, graphics drivers updates, printing software, etc.) he comes back to the same problem when I restart... screen empty, unable to do anything, much less actually connect. It is the first time that has happened for reinstalling Windows and I am quite lost.

  Hello

  Thanks for posting your query in Microsoft Community.

  I can understand the feeling of not being able to see the machine how it should work and I'll be happy to answer your query. Let me ask you;

  1. What is the brand and model of the computer?
  2. How did you create installation media for Windows 8 (which is the link/URL)?
  3. When you say new facility, do you mean clean install?
  4. Which operating system was installed before Windows 8?

  I suggest you to follow the steps below and check.

  Step 1: Please refer to the following and create the installation media for Windows 8.

  Create an installation media (DVD/USB) for Windows 8

  Note: You should have the product key for Windows 8 to create installation media.

  Step 2: Start to the recovery environment with installation of Windows 8 media

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair of Advanced Options screen.
  (g) following, choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Step 3: The restore of the system on the Advanced Options screen

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state.

  You can follow the steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) select System restore.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

  Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

  Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

  • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  • Under "Time range to clear", select "all".
  • Now, click the arrow next to details to toggle the active details list.
  • In the list of details, see the Cache and Cookies and uncheck everything.
  • Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

• Cannot connect Tecra M10 to the Internet

  My wife has a TecraM10 with an Intel 82567LM gigabit wired network adapter. It cannot connect to the Internet via either wired LAN by plugging directly into the container of Cat 5 to the rear of the machine or the thorugh a docking station.

  A diagnosis indicates that the LAN switch is turned off and check the manual as to his location to turn it on.

  I can't find a reference to a LAN switch in the manual. I checked TCP/IP protocols and they progress ste correctly and the device manager says it's working properly.

  Any ideas? Thank you. John

  Hello John

  Card LAN installed and listed correctly in the Device Manager?
  >... LAN switch is off
  Laptops doesn t have LAN switch. WLAN spend only so I t understand how you can get this message.

  Please check device manager first and let me know if the network card is OK here?
  When you connect the LAN cable to your Tecra is green LED ON?

  By the way: did you test connecting to the local network using another PC/computer laptop?