Embed videos from the host server?

Similar Questions

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• How to stream video to the host, my site using Adobe Flash Media Streaming?

  Please help me how to stream video to the host, my site using Adobe Flash Media Streaming? Using localhost and my ip I can watch streaming in my computer. How should I configure my server to watch streaming on my site?

  Help, please!

  Thank you!

  If godaddy gave me the ip address how can I use it in my video streaming, if I installed the program on my comoputer (at home) and I'm streaming from my computer on my site?

  If I can't do my public ip should I broadcast host? How it is posible. I have to install the program to my host?

  Thank you very much for your help!

• email problem - "mail from the host cannot be found.

  Problem title: original email.

  Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.

  The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.

   

  Gary van, Microsoft MVP (Mail)

  ------------------------------------------------------

   

  "Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *

   

  My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.

   

  The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.

  Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.

   

  Gary van, Microsoft MVP (Mail)

• CSA 6.0.2 software agent failed to gather the configuration sent from the central server

  Have CSA 6.0.2 much workstaitions not answering a similar event:

  The agent software cannot compile configuration sent from the central server:
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4256): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4550): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4708): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4771): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5155): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5165): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5171): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5192): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5211): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5215): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5236): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5252): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5258): parse error
  C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5287)

  You may be experiencing bug CSCtg78612.  This occurs when the CSA MC is updated from a previous version of 6.0 to 6.0.2 and managed agents have not yet been upgraded.  You should be able to solve the problem by programming upgrades the agent for the affected hosts.

  You can view the full bug details here:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612

  Scott

• "No 3d support is available from the host"

  Program: Job 12

  Operationg System: windows 7 Professional K service pack1

  Graphics card: GeForce 9600 M GS

  
  I saw the message 'no 3d support is available from the host'

  I don't know this solution.

  I need your help.

  How can I solve this problem?

  You can specify... is your operating system Windows 7, or you are running WIndows 7 in a VM on something else?

  Make sure you have the latest video drivers.

  If you use windows, make sure that hardware acceleration is turned on.

  If you see no problem and everything works, then ignore it.

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• Webutil - deleting files from the application server

  Is there a Webutil function that will erase the files from the application server?
  
  I tried Webutil_file. Delete_File but it doesn't seem to work. Not quite sure if it's for customer files?
  
  Thank you
  Paul

  Hello
  Why don't you use HOST or WEBUTIL_HOST command to delete files of APPLICATION SERVER for example...

  HOST('DEL FILEPATH\FILENAME.EXT');
  or
  HOST('CMD /C DEL FILEPATH\FILENAME.EXT');
  
  or 
  
  WEBUTIL_HOST('DEL FILEPATH\FILENAME.EXT');
  or
  WEBUTIL_HOST('CMD /C DEL FILEPATH\FILENAME.EXT');
  

  Function Webutil_File works on the client side. See the documentation for webutil.
  http://www.Oracle.com/webapps/online-help/forms/10G/State?navSetId=_&Navid=3&vtTopicFile=web_util/functions.htm&vtTopicId=

  -Clément

  Published by: Graham on April 20, 2010 20:07
  Link added

• How to move all e-mails from the imap server to local folders automatically for each mail?

  Hello

  I want to transfer all my e-mails in local folders as soon as they arrive in Thunderbird and remove them from the server. I can do this manually by moving the mails to hand, but I want to do it automatically by Thunderbird.

  After a few hours, I found there is an option on the removal of e-mails from the mail server, if I use POP3, but it is not an option for IMAP.

  Important note: my mail can not be resolved like POP3, so please don't segguest implementation using POP3.

  Thanks in advance.

  http://KB.mozillazine.org/Filters_%28Thunderbird%29

• Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  At the moment the iCloud synchronizes only with what is already on my iPhone.

  This article should help you remove photos from my photo - Apple Support stream

• Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Depends on the model of iPod exactly.

  If the iPod is supported you can try using AirDrop: How to use with your iPhone, iPad or iPod touch - Apple Support AirDrop

  If this is not the case, there are applications in the App Store that will allow you to send files, including videos taken with the iPod and who reside in the film to other devices.

  https://iTunes.Apple.com/us/app/photo-transfer-app-easily/id365152940?Mt=8

  Photo transfer app allows you to quickly copy pictures and videos from your iPhone, iPad, Mac or PC using your local wifi network.

  You can't send videos that are stored by default Apple video App.

• How to transfer videos from the internet

  I want to copy a video from the internet, transfer it to a DVD and play on my tv.

  Can you play Flash videos on a TV?

  You can download YouTube videos with Video Downloadhelper extension.

  • https://addons.Mozilla.org/en-us/Firefox/addon/Video-DownloadHelper/

  You need a plugin for your browser to play the videos and an application to play videos offline, but an extension works better for downloading videos.

• NB200-h-13 - no response from the DNS server and gateway

  Hello

  I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAY

  The connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.

  Hi abk55,

  What program you receive this error message?
  Have you tried another browser, for example Firefox or Opera?

  I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
  Also, try to disable the filtering of MAC addresses and use another encryption.

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.