Similar Questions

• Cloning of servers and Agent Manager

  I'm running into a situation where our AIX engineers are cloning of servers with configurations Manager Agent. When I check the configuration file for the Agent on the cloned Server Manager it shows the host name of cloned servers and agents. What is the right way to install the agent Manager. Must it be freshly installed on each server? If he is cloned, what measures must be taken to ensure that all configurations are changed on the new conical Server?

  Raul,

  You want to change the display host name in a file named fglam.config.xml (directory of the example that you can see the path: C:\Quest_Software\Foglight_Agent_Manager_32Bit\state\default\config\fglam.config.xml)

  In the file, you will see the old name of the host. You want to change this string for the name of the new server

  Make the change in the display of the hostname

  MININT-hi87m9s_32Bit

  David Mendoza

• Foglight Agent Manager 5.6.6

  Hello

  Currently, we are on Foglight Agent Manager 5.6.2 and we want to go to Foglight Agent Manager 5.6.6.

  Should install us Foglight Agent Manager 5.6.6 or we should go to?

  I can't find the Foglight Upgrade Guide on support.quest.com.

  Thanks for the help.

  5.6.7.2 fglam is the most recent (but also an additional patch for 5.6.7.3)

  Upgrade from FMS guides can be extracted from edocs.quest.com

  David Mendoza

  Foglight Consultant

• Error messages in the Log Agent Manager

  We get below the error message at the start of the SGF in the log agent Manager

  Sounds to me like the adapter on the fms is not executed in hardware.

  When you go to the Administration > adapters (as agents) do you see an fglam adapter in an active state?

  If it is not active, you can try to turn it on?

  

  Golan

• Custom development of modules CompactRIO - Embedded window of "missing" project manager

  Hello!

  The scenario:

  I am currently working on a custom CompactRIO Module. The material is made for the most part, I installed CompactRIO MDK 1.0 and I want to configure my CompactRIO system and develop the driver VI for my module.

  The steps required to configure the cRIO system before you start developing the pilot VI is the following (as mentioned in the documentation of MDK):

  1. launch LabView and select as an execution target FPGA devices. The Embedded project manager window will appear.

  2. Select the file-> New and create a project (LEP) LabView Embedded file.

  3. ...

  Used equipment:

  -LabView 2011, a Student Edition license

  -LabView FPGA and real-time modules

  -NIRIO 4.0

  OR-CRIO9024 controller with 8-slot chassis

  The problem:

  After the launch of LabView and selecting FPGA as a target (see figure), even by pressing the "Go" button next to the slide in the menu window of Embedded project manager will not appear.

  I also tried searching in other menus, without success.

  Issues related to the:

  1. where can I find the Embedded project manager?

  2 is it possible, that I can't find the window of Embedded project manager because I have a student licensed LabView?

  3. How can I create a LEP file in this case?

  4. can I use (and if so, how?) the option "create a pilot instrument? (see the attached figure)

  Waiting for answers,

  Levi

  Hello!

  After some research, I managed to create the link between my custom cRIO module and LabView.

  The complete solution (with LabView 2011):

  -Add the line "cRIO_FavoriteBrand = generic ' in the file LabView.INI"

  -Launch LabView

  -creation of a vacuum of the project and select FPGA execution target, click OK

  -Select 'CompactRIO Reconfigurable Embedded System' as the project type, click Next

  -the next step is the detection of the chassis / modules, followed by the creation of the new FPGA project

  -Add the custom module: click right on the target FPGA-> New-> C Series-> new target Modules or peripheral-> series C Module-> OK

  -Enter the name, select 'generic' module type, enter the location

  Hope it helps someone someday.

  Levi

• What is agent of Acresso software manager and how do I get rid of him?

  Acresso software agent manager attempts to access the internet, what is this program?

  Uninstall the Reader PDF did the job.  Find the software that has been installed on that day and it might work for you too.

• Error during installation of the agent on the monitored host Manager

  Hi all

  All in SOLARCOSY a manager of the agent in the host control, we are faced with this problem. Please could someone help me on this ASAP.

  Please find the attached screenshot.

  Kind regards

  Shiva G

  Please check this article, he talks about a similar error start agents, the solution may be the same

  https://support.quest.com/SolutionDetail.aspx?ID=SOL116611&PR=Foglight

  • Title

    Cannot start agents on Windows FglAM: no memory buffer space available JVM_Bind

  • Description

    Agents installed on an Agent Manager of windows may not start. The following errors appear in the journal of FglAM:

    2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - cannot start
    java.net.SocketException: no available buffer space (maximum number of connections reached?): JVM_Bind

    2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: could not stop the native Launcher
    java.lang.NullPointerException

  • Cause

    The number of ephemeral TCP ports by default is 5000. Sometimes, this number can be less if the server has too many active client connections through which ephemeral TCP ports are all used to the top and in this case no more can be allocated to a new client connection request.

  • Resolution

    Resolution

    The solution is to open the registry editor and look for the registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and add a new entry, as shown below:

    Value name: MaxUserPort
    Value type: DWORD
    Value data: 65534

    Workaround

    Restart the Agent Manager Foglight

  • More information

    Ref: http://support.microsoft.com/kb/196271

• Foglight Agent error manager and Agent infrastructure

  I get the following in the Foglight Agent Manager error message:

  ECHO myWindowsAgent > com.quest.remoteos.SystemMonitorImpl ERROR [Quartz-1] - unable to connect to . No data has been collected.com.quest.glue.api.services.RemoteConnectionException: a connection could not be established

  Also when you try to add a single host to remotely monitor I get the same error message.

  I checked the credentials and they are correct... any ideas how to solve this problem?

  See if this article helps you, as he mentions it exactly the same problem (3 types of problems, it's too long to copy/paste).

  https://support.quest.com/SolutionDetail.aspx?ID=SOL92051

  Also, please check the release notes troubleshooting section because it may be a problem getting WMI wogs.

  http://eDOCS.quest.com/Foglight/567/files/CartridgeForInfrastructure_567_ReleaseNotes.html

  Troubleshooting

  This section provides a list of references that deal most often face questions about remote connectivity, which allows easily using the information provider knowledgebase or Foglight documentation for troubleshooting:

  • To check the WMI connectivity using a built-in utility for Microsoft Windows, see http://technet.microsoft.com/en-us/library/cc180684.aspx
  • To troubleshoot WMI class access permissions, see http://blogs.technet.com/b/askperf/archive/2007/08/14/wmi-troubleshooting-permissions.aspx
  • For more information about connecting WMI in Windows Server 2003/Vista and later versions, see http://msdn.microsoft.com/en-us/library/aa822854 (VS.85) .aspx
  • For WMI troubleshooting tips and techniques, see http://msdn.microsoft.com/en-us/library/aa394603 (VS.85) .aspx
  • To fix these problems that may occur when you connect the WindowsAgent infrastructure to a remote host, see the section "Windows-specific Configuration > troubleshooting Windows Agent questions" in the Setup Guide of the Agent Managerof Foglight.

  Golan

• Agent control 12 c Enterprise cloud manager not certified on WS 2012 R2

  Hello

  Oracle 11.2.0.4 database is certified on Windows server 2012 R2, but unfortunately, it seems that control 12 c Enterprise agent manager cloud not certified on WS 2012 R2.

  Can you confirm that?

  When it will be certified?

  Is there an official way to get around this?

  Rgds,

  Frédéric

  Hello

  The matrix of Certification for 12.1.0.4.0 Agent platform, I see that Microsoft Windows (64-bit) is supported on Windows 2012 R2.

  

  Please see the matrix of certification for more details.

  Thank you

  Sumesh.

• in 5.5 esxi ESXi management agents

  Hi gurus,

  How many agents managing ESXI is available after vsphere 5.0?

  Kind regards

  Kamlesh.

  Pass

  VPXA

• Troubleshooting for websphere inactive agents

  Hi all

  I was sent followed on my systems WAS (I'm not an administrator WAS, and I understood some basic concepts before I deployed it). One of my agent is in idle state. I need to troubleshoot why its in idle state. I checked the startServer.sh of setupCmfline.sh and Cmdline.sh, the global profile, the startNode.sh, the startManager.sh and verified that everything is OK. Then, I checked the startserver newspaper and unfortunately it didn't there nothing that refers to Foglight_Agent_Manager or JavaEE.

  So I need help with the troubleshooting steps I need to follow here. Help, please.

  Kind regards

  Roshan

  Thanks for the screenshot.

  Java agents work a bit differently in the rest of the agents, you can stop/start data collection but you can't turn them becuse they are not started by the Agent Manager.

  Java agents are launched at the start of the JAVA virtual machine, we have parameters added to a Java Server start script and when a JVM starts the beginning of the agent, when a JVM stops at the stop of the agent.

  If these settings are made on the server to run the script and starts the JVM without our parameters we get an indicator showing that the agent is stopped even if the JVM is started because the JVM is started in the past with us (if it is registered with Foglight) but the agent is not running.

  In your case, it seems that websphere Deployment Manager and server are started (which is awesome, it means that we get data) but Caroline is not started or did not begin with our parameters, it is possible, it is upward, but simply not running with our parameters (maybe they were out).

  The good news is that the Caroline should reports no information of the JVM to foglight, dashboard status agent is the only one, it appears, it should not any sort of data report to us because it's just a mechanism to stop/start the servers.

  The bad news is that, in many cases we instrument the agent node as a mechanism to add our settings on the server, so when the servers are stopped and then started, they are started with our parameters. BUT it is also possible to stop servers start with scripts who have our parameters or add parameters directly in the console of Websphere.

  If the node agent is the only thing that is not of Foglight and servers always stop/start and connect to the Foglight information and report, it's the most important thing.

  You can look in the node agent startup script and see if our parameters were out, you can check if the node agent is active (it can have all stopped) but a point in Foglight you are ok because the node agent does not appear in the dashboard application server monitor

  Golan

• Objects monitored by reflecting in data management

  Hi all

  Need your quick help on this issue.

  We uninstalled fglam from one of our monitored hosts and we see not this host under the hosts of the agent, but when we try to remove items permanently from the management of data, its reflection back even after removing objects.

  Could someone help me on this issue as soon as POSSIBLE.

  -Shiva

  Hello

  We don't automatically delete data because in some cases people always want to see that the old data.

  If you want to remove it, she must be removed from the dashboard after Managment Server > servers > data management

  https://support.quest.com/SolutionDetail.aspx?ID=SOL69418&PR=Foglight

  You can remove the host from the host model and you can remove the agent manager model Manager agent

  

  

  Please note that if there is something that is still the existence of this object, it will pop up again once

  Hope this helps

  Golan

• Several officials of the Agent installation

  I installed a 5.6.7 Foglight Manager Agent on a Windows 2008 R2 server that monitors hosts and custom cartridges. Now I need to install another agent manager pointing to another FMS server. Is there a recommended way to do this? I need also to enroll in another Windows service.

  Hello

  Please check out this article written by Robert Statsinger

  «Deployment of two FglAMs to the same Windows host and is run as a Windows Service»

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/w/Admins-wiki/5773.deploying-two-fglams-to-the-same-Windows-host-and-running-each-as-a-Windows-service

  Best regards

  Golan

• PS_App could not be found in foglight monitor agent areas

  Hi all

  We have configured the monitor agent PS App for Peoplesoft-Windows machine monitoring. We gave the home path and the path of smoking in the properties of the Agent and the cartridge is 5.6.2.1 we use.

  the agent is unable to find the areas for the host, especially for Windows machines.

  Please suggest some troubleshooting steps to resolve this problem.

  Thank you best regards &,.

  Guenoun

  Gokuinath, I recommend put you foglight agent manager that is associated with the agent of PeopleSoft application in debug mode. With the debug mode, we can see in file of newspaper on what additional information the agent.

  The command below will activate the debug mode without having to restart a foglight agent manager:

  fglam.exe - set-global-debug-level 1

  You must disable and re-enable the peoplesoft application agent that you have worked.

  To do additional debugging, we see the files of fglam newspapers and the foglight peoplesoft agent logs

  David Mendoza

  Foglight Consultant

• Foglight Management Server download

  Hello, everyone!

  Where I can download trial versions:

  Foglight Agent Manager, Management Server?

  This site: http://www.quest.com/downloads/ of products - not avalibale.

  Thank you!

  Foglight can be downloaded from the support site

  https://support.quest.com/Softwaredownloads.aspx?PR=268444554

  You need to contact the sales team for a temporary license.

  What possibilities of monitoring you want to test? VMware, database, java... ?

  Best regards

  Golan