Impossible to pass a few apps

Similar Questions

• Impossible to pass all the apps that require a connection

  I had this problem since the summer power on and off: as soon I to connect to update an application, the app store fails. My connection is fine and the update process starts, but closes unexpectedly after about 30 seconds telling me that I have to go to the "items purchased" (note to Apple the German translation is bad). Of course, even when I switch to the pane of purchases the problem persists. The same problem exists when trying to install all new elements it, even for free.

  Initially, I had this problem with XCode 7. I spent over an hour with telephone support from Apple to try to correct this there included removing and running traces. They let fall the ball for several weeks and when I get back in touch they had no solutlon. At some point in October, the seeming problem to resolve itself but reappeared since then and currently preventing me from updating to OS X 10.11.

  I enabled debug for the app store and tried the different options all to nothing does not. I don't see anything special except for "storedownloadd (488) deny/dev read-data file.

  Has anyone experienced something similar and managed to fix it?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• BlackBerry App Q10 does not open a few apps that I downloaded

  Nice day. Pls my blackberry Q10 does not open a few apps that I downloaded. I need help on what to do to solve this problem. Thank U

  MOD Edit: Title to be more descriptive

  What applications?

  Downloaded from where?

• How to run or pass local webworks app through ripple?

  How to run or pass local webworks app through ripple?

  Do not click on 'Enable' to ripple extention if my files in the local file system.

  You can use the local file system for waving as well, but you must do this:

  -Open Chrome settings

  -Click on Extensions

  -Select the ripple

  -Check 'allow access to the URL of the file.

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• BlackBerry smartphones my PIN: (deleted personal information) I bought a few apps, after f...

  my PIN: (deleted personal information) I bought a few apps, now after the update of the firmware, I would like to reinstall my apps, but when I go to appworld - my world - login - paypal and password, I get the message "cannot authenticate the user" (or something like that, in German, paypal data are 100% correct)-I want to just connect an install my apps already purchased or to obtain any other Klaus helpgreetings of wayplease

  Hello!

  To reinstall your applications, please follow this section of the AppWorld user guide:

  http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  For more information, registration keys, see this KB:

  http://www.BlackBerry.com/BTSC/KB18646

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• Help, please! Impossible to pass local account for microsoft

  I got a Samsung ATIV smart PC 500 t as a gift today and I'm going to be very difficult to implement. I tried on and off for about 14 hours now without success.  Here is what happened:

  I've updated the PC software told me to. (there was a brochure stating that I needed to update before using my keyboard dock)

  I put the PC by using a local account, because for some reason, he said it was impossible to add my Microsoft account I created today specifically for this PC.

  I tried several times to switch to the Microsoft account and I get the error message

  "We're sorry, but something went wrong. your account has not been changed to this account from Microsoft.

  "Code: 0x800b0101.

  What does that mean? Why this is happening and what needs to be done to solve this problem?

  I also tried using the tiles, hoping maybe going this route would allow me access to my Microsoft account so that I can at least use the apps and what not.  When you try to open the store, I have this message: 'we are could not connect to the Bank. It could have happened due to a problem with the server or the network connect timed out. Please wait a few minutes and try again. "I also tried via the contacts, messages and weather applications. Whenever I get similar error messages.

  Obviously, I'm not very savvy, connect my internet computer works correctly, I am able to access the various web pages (even if I get a warning message of security for each of them, which is very annoying).

  Anyway, I can't understand this. Does anyone have a tip or useful information? Can I use my PC.

  Thank you!!

  Make sure that your date and time are correct.

  Set the clock - Windows help

  You can also try to create another user account on the computer as an administrator, log in there, then switch to a Microsoft Account.

  

  On your keyboard, press Windows key + C

  Click Change PC settings

  

  Under laptop settings, click users

  

  On other users, click Add a user

  

  

  Click the link log in without a Microsoft account

  

  Click on the Local account

  

  Enter the user name, account, confirm and create a hint, just in case you forget. Click next after you complete these steps.

  

  If you want to activate the Parental control on the account that you just created, check the box, otherwise, click Finish.

  

  Press Windows key + R

  Type: control userpasswords

  Click on manage another account

  Select the account that you just created

  The value of the privilege of administrator account if it has not been defined

  Click OK

  Restart and log on to the account, and then try to switch to a Microsoft Account.

• Help, please! Impossible to pass the local account on the Microsoft account.

  I got a Samsung ATIV smart PC 500 t as a gift today and I'm going to be very difficult to implement. I tried on and off for about 14 hours now without success.  Here is what happened:

  I've updated the PC software told me to. (there was a brochure stating that I needed to update before using my keyboard dock)

  I put the PC by using a local account, because for some reason, he said it was impossible to add my Microsoft account I created today specifically for this PC.

  I tried several times to switch to the Microsoft account and I get the error message

  "We're sorry, but something went wrong. your account has not been changed to this account from Microsoft.

  "Code: 0x800b0101.

  What does that mean? Why this is happening and what needs to be done to solve this problem?

  I also tried using the tiles, hoping maybe going this route would allow me access to my Microsoft account so that I can at least use the apps and what not.  When you try to open the store, I have this message: 'we are could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I also tried via the contacts, messages and weather applications. Whenever I get similar error messages.

  Of course, I am not very computer savvy, my internet connection is working properly, I am able to access the various web pages (even if I get a warning message of security for each of them, which is very annoying).

  Anyway, I can't understand this. Does anyone have a tip or useful information? Can I use my PC.

  Thank you!!

  Hello

  Please refer to following patch and see if that helps:

  http://www.thewindowsclub.com/your-account-wasn

  Hope this helps, good luck :)

• Cannot load sites http but https are ok - as impossible to connect to the App store

  Hi people, for the first time I have a serious problem with my Mac and 10.8.5 and I hope to find some help here.

  The problem:

  All of a sudden (no idea of what happened, why it happened) I can not open Web sites beginning with http, for example http://www.advrider.com

  The error message is: unable to connect

  However websites like Facebook, this forum etc i.e. all sites beginning with https://... properly.

  This is valid for Firefox and Safari.

  Thunderbird works fine but the I can't connect to the App store.

  The problem is that I don't know yet where to look to find the problem.

  I did some fishing (without a solution)

  -verification of DNS settings (use 8.8.8.8 and 8.8.4.4)

  -Clear cache

  -Re-install point AP

  -switch to another Wifi network (currently in a hotel and there are supposed to be two totally independent networks)

  -turned off the firewall

  n ' use a proxy

  My wife with El Capitan Mac works fine on the same network, but because I don't know what to look for, it makes it almost impossible to compare the settings one by one.

  No idea what to do?

  Post edited by: Kuhjunge - another mac works fine on the same network.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Profile re-pushing apps Manager; Update of information causes repeated only a few apps push; loop occurs when each check-in

  Someone else knows applications re-pushing to the each check-in?

  The 'push' that happens quickly, so it seems that it is just to check if the applications are there, and receive the answer 'yes' and then say 'managed '. But she does it every time.

  I've experienced this with various groups of iPads, various groups of applications.

  The first time I came across this, there was a group of 3 applications that were pushing the re - to a group of 30 iPads. Applications that have been "re-growth" would NOT actually launch (launch for a fraction of a second but disappear). After some troubleshooting, I found that 'Kahn Academy' was the culprit. I removed Academy Kahn manually the iPad, as well as the profile. I also removed the other 2 apps. Then I added 2 other apps. After that it worked fine and I never tried to load Kahn Academy again.

  Currently, I have another group of 36 iPads that were freshly configured and fine last week. I checked and verified that I could update to information on each of them and have NO extra application by pushing. But then this week, several apps to continue to try to push again. My only theory is that these applications have been possibly updated and he tries to push the update over and over again.

  Any ideas you have on how to troubleshoot and resolve this problem is welcome!

  I discovered that indeed is the apps are left on "Automatic" instead of "manual" updates are driven out. The main problem with this is that, often, the application is currently open on iPad to the user. When the update is released, it automatically attempts to push and the user is notified by a message saying that the application wants to update. If the user selects Yes, she leaves the app and probably the update is completed and they can relaunch the application. However, they can choose cancel or later (I don't remember not the option called ""). Also in a classroom, the iPad cannot be used for a few days and can therefore remain in the intermediate phase with fast display and no user input. Can lead to various abnormalities.

  I found that leaving the apps on 'automatic' translates invariably by some applications do not install properly or become corrupted. The 'Push' record as "successful", but the app will immediately leave the launch. Whenever you "update information" it will try to push again, the same result.

  To fix, delete the application from the iPad manually and re-grow the app.

  Also note that if you have assigned the apps through a group, you CAN always go to the record of each device in the Profile Manager and manually push the app to just 1 unit.

  In addition, note (in case you didn't know), when the application is 'Pushed', what is happening is that the server is indicative of the iPad to download on the app store. So the server itself does not technically push the app, it pushes the download command. (if your OS X server is also cached, then it is possible, he finally sends the actual data app, however the download command always treats the iPad as an independent client that connects to the app store).

  Note also that the Profile Manager does NOT list the application in the dialog "Delete application" group if none of its members not really 'did' to install the application. This makes difficult remote travel if the app is stuck in limbo (think it is installed but closes at launch). You must manually remove on iPads of problem.

  My general rule now is to quit all applications in 'manual' mode and then schedule updates periodically. Before the update, make sure that users have left open apps.

• Impossible to pass primary and secondary monitors

  After the upgrade of thinkvantage Productivity Center I can either spend my main monitor.  My secondary monitor works, but only in mode "Extend my Windows desktop on this monitor.".  If I try to click on the button "Use this device as the monitor main." on the top control panel a few whites on the monitor and switches to my main monitor again.

  At the same time, I lost the ability to use the Fn + f7.  Pushing this combination has no effect.  If I pass the centre of productivity and choose Configuration from the device / select display settings nothing happens.  It seems that upgrading the productivity Center has beaten some program is in charge of the evolution of the monitors.

  Any help would be appreciated.

  Hi and welcome to the forum!

  What ThinkPad and the operating system are you using?

  Presentation Director is responsible for the combination Fn + F7, put it back, I suggest:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67364

  Special attention to the instructions: -.

  Installation instructions

  Notes:

  • Before installing the Director of the presentation, he must install a display driver appropriate for the target system and the "Lenovo System Interface driver". Refer to the README file of each software package for the installation of such software.
    • Or Lenovo System Interface driver for portable computers ThinkPad-no
      For portable computers ThinkPad Lenovo System Interface driver
      It is necessary to install "Lenovo System Interface Driver" for using Windows Vista.
    • Display driver
      It is necessary to install a display driver appropriate for the target system that is provided by Lenovo. Director of presentation does not work with any display of Inbox driver in the OS.
  • Activate the Fn + F7 key on the screen, to also install the following packages:
    • Power management driver for Windows Vista, XP, 2000, Me, 98 SE.
    • Hotkey driver for non-ThinkPad notebooks or
      For ThinkPad Hotkey features integration
      (Note) If Hotkey features version 2.20 or later is installed on your system, install Presentation Director 4.04 or later version.

• Impossible to pass the numbers or iWorks

  somehow, I lost my iMac iWorks.  I reinstalled the original version.  Always impossible to open my files.  I'm trying to upgrade, but nothing happens.

  Hi Mike,.

  What "original version" numbers you have reinstalled? How you don't have reinstall it?

  What version you are trying to upgrade to?

  Kind regards

  Barry

• How to pass 10 IOS apps?

  We used to keep apps until they move. How can we do this in 10 IOS?

  Press and hold gently, then you will get to squirm.

• Impossible to pass the Lion iMac

  Hi, I tried to download the El Capitan too, but the Get button in the App store, give me only: copy the link or tell a friend, there is no download button. Actually, it's for all the app (free or paid) in my App store, what wrong with my Mac?

  What should I do?

  Look under the Apple Menu and click on about this Mac to us indicate the number of age and model of your machine.

• Impossible to pass to OS Sierra

  everytime I try to upgrade my MacBook Pro, it indicates an internal error prevented the update from happening. I tried everything I can think of. The previous operating system installation and try again to reset the NVRAM, I'm confused as to what might prevent installation to compete successfully. And advice would be greatly appreciated.

  Hi Tommyweather,

  Thanks for posting in the Community Support from Apple! I understand that you are unable to update your MacBook Pro with macOS Sierra because you get an internal error. I always like to make sure that I keep my Mac to date with the latest version of the software, so I can understand wanting to make sure that you are able to update your Mac also. I'm happy to offer some suggestions.

  Before going through the troubleshooting steps, I recommend to backup your data using Time Machine. The steps that I will recommend should not erase your data, but it's always a good idea to ensure that your data is safe.

  Use Time Machine to back up or restore your Mac

  The next thing that I recommend you do is try to repair your hard drive using disk utility. It is possible that an error on the hard disk can cause the error you get. You can use the next section of this article to help with this:

  Try disk utility

  Follow these steps to use the disk utility app to check or repair a disk.

  1. If you use OS X Lion or later, start the system recovery or restoration of Internetcomputer. If you are using an older version of Mac OS X your computer is equipped with a Mac OS X installation disc, insert the installation disc and restart the computer while holding the C key instead.
  2. When your computer has finished starting, choose utility drive in the Utilities window, or in the installation menu if you started from an installation disc.
  3. Click the first aid tab.
  4. Click the triangle to the left of the hard drive icon to display the names of your partitions and hard disk volumes.
  5. Select your boot (typically called "Macintosh HD") drive.
  6. Click on repair. Disk utility verifies and repairs the disk.

  Tip: With Mac OS X 10.6 and earlier, always start your computer from a disk to install or restore when you use disk utility to check or repair your boot volume. Otherwise, you might see some error messages from disk.

  Resolve startup issues and perform maintenance on disk with disk utility and fsck

  Once you have verified that your hard drive is working normally, try to reinstall the update. If you still run an error, respond and let us know for what part of the installation, you see this error.

  See you soon!