Several officials of the Agent installation
I installed a 5.6.7 Foglight Manager Agent on a Windows 2008 R2 server that monitors hosts and custom cartridges. Now I need to install another agent manager pointing to another FMS server. Is there a recommended way to do this? I need also to enroll in another Windows service.
Hello
Please check out this article written by Robert Statsinger
«Deployment of two FglAMs to the same Windows host and is run as a Windows Service»
Best regards
Golan
Tags: Dell Tech
Similar Questions
-
The Agent installation to view Vmware on a virtual PC on the player or workstation
Hi all
We have a problem where by we have a PC running Windows XP with player installed on it. Then, build us our image of default on PC and install the vmware tools. We then install the Agent view on it, but he asks us for the default server which I don't want to specify at that time here. If I do the above actions on an ESXi server then the Agent does not ask us for the default server. I looking for the agent on the position of the player he can find on the ESXi server, but not on the drive?
Thank you in advance.
Kind regards
Rob
OK, it's a summer product your unmanaged desktop "unmanaged" witch of office is defined as any machine is not running on an ESX Server. You can reivew the instructions on installation for a desktop computer unmanaged on page 204 in the following link http://www.vmware.com/pdf/view40_admin_guide.pdf. I'm sorry to say vCenter earlier, but for some reason it was sticking out in my head.
In the end, you will need to give the person the name of connection broker.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
picked up on JBoss do not automatically receive the agent installation
I installed the server hq 4.0 and agent and I have a jboss Server 5 current running on the target computer.
usually when I start the agent, it will automatically detect that jboss is running on the target, but this time it didn't.
no idea why?
is jboss 5 supported by automatic discovery?
How can I get that it will automatically record (id rather not add jboss manually)
Thank you
mast
Post edited by: cronos4dHello
Yes, in HQ 4.2, it is supported. It could be argued by 4.1, I don't remember when it was introduced. However, I know that it is available in 4.2.
-
The cluster Agent installation does not ask for password Agent
Hi all
I try to install configure the management agent on a few nodes of the RAC on Windows Server 2003 64-bit. I installed the agent on other hosts before, but not on clusters. Installation seems to be pretty simple, YES the other nodes automatically detects and installs on them. However, when I do the installation of cluster, I am never invited to the agent registration page register with the administration server. He's asking the host name of the server and port, but never the password. Then the agent installs and starts the service, he is never seen by the administration server.
Has anyone encountered this before? Is it possible to save it now, or should I just try to reinstall manually?This is an expected on windows cluster behavior, registration of the agent will not be asked.
Once the user installation must ensure the agent on each node manually by emctl sure agent\bin -
I need the complete installation for firefox, install on multiple computers. Several downloads of Firefox uses too much internet data download budget. I can't find a link for the complete installation. Satellite Internet has limited budgets for data usage.
You can click on the link 'Systems & languages' just below the green button download on this page:
You can find the full version of the latest version of Firefox 22.0 in all languages and for all systems operating here:
-
Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects. He was installing everything. Have tried reinstalling several times. The firewall turned off and no other programs running. Running windows 7 64 bit. Had no problem with installation on my last computer 64-bit windows 7
It seems that everything is installed now. Don't know how, but I think that I opened it as administrator.
Thank you
Corey
-
Black screen after installation of the Agent from the view.
Hello
I am facing a weird problem on my windows 8.1.
I have install for use as a template for a pool automated view 5.1
When I install the vmtools, after that I installed the agent of sight, I got a black screen.
I tried several times and I got the same thing.
I'm not able to convert into a model of deployment of workstations after.
Can you please help me on this problem.
Thank you in advance.
I'm a little unclear - which command do you have installed? If you have installed VMware Tools after the Agent of the view, you need to uninstall and re-install the Agent of the view... It must ALWAYS be installed last, even if you're just updating tools.
In addition, Windows 8.1 is not supported with view 5.1 IIRC
-
I have attemptred to convert a Server Windows 2000 Server SP4 on a server of VMware ESXi 4.1.
I started the process of a PC Windows XP running VMware converter-all-4.3.0 - 292238 and I got the error "could not complete the installation of the agent vCenter Converter on server %. Error 1 603 "code.
Read in the forums, it seems that the correct version of VMware Converter Standalone is up to 4.1: is this correct?
To solve the problem, I installed VMware converter standalone 3.x on Windows 2000 box, but I don't think it's the best choice.
Can someone please help understandiong what is the proper way to convert a Windows 2000 Server?
Concerning
Marius
Faced with the same problem.
Solution: manually install the agent of vmware converter on the machine that you want to convert. Choose install Cusotm and only install the agent (client or server)
See you soon
Swap
-
11g installation of the Agent on AIX fails
We install 11g Agent and it fails with the following error: error in invoking target 'agent nmb nmo emsubagent SMN.
We need to set one of the environment variables? Please help.
PaulHello
This is a known issue on AIX 6.1, follow the document below:
1298284.1 Note : INSTALLATION of the AGENT ON AIX 6.1:ERROR IN CITING FOCUS 'AGENT NMB NMO SMN EMSUBAGENT'
Best regards
Vincent -
Problems with the new Agent installation 12
Hello
Installed a new officer on 12 c, the installation was successful.
But the Agent status is not properly in the Console.
Why? All possible cases?
s/nHello
Thanks for the pointers...
When you use the b_startAgent parameter.
After installation, there are the 3 steps:1 start the agent of
. / emctl start agent2. Add the target
. / emctl config agent addinternaltargets3 configuration of the Plugin
/Core/12.1.0.1.0/Perl/bin/perl /core/12.1.0.1.0/bin/AgentPluginDeploy.pl - Origine_oracle /core/12.1.0.1.0 - agentDir - pluginIdsInfoFile /plugins.txt - action set - emStateDir Once the steps above carried out, check the status. If possible once syncing of the agent as well.
Go to the Home Agent and the "agent" dropdown select resynchronization.
Best regards
Vincent -
Install the agent in several ORACLE_HOME / instances on a host
Hello
I would monitor with OEM Grid 11 PSU6 some SAP (11 GR 2) databases running on a single Linux host.
Each database has its own ORACLE_HOME, user oracle and listner, sharing only the ORACLE_BASE (/ oracle). Example:
$> ps - ef | grep smon
2969 1 oraus1 0 Feb06? 00:00:45 ora_smon_US1
13078 oraus2 1 0 04:30? 00:00:00 ora_smon_US2
oraus3 32371 1 0 04:10? 00:00:02 ora_smon_US3
What is the best Setup for EMAgent?
A share, or one for each database (inside the different AGENT_HOME)?
Thank you.
P.I am also tracking several SAP DBs on individual hosts.
Install only one agent for each host. I was using an account dedicated to the agent ("oraagent"), installed in a separate Directory (and not under oracle) tree. As long as the user agent account belongs to all s/n OS groups used for SAP instances, things seem to work well.
A suggestion (although I use 12 c) - I had a lot more luck when each SAP database has its own, not shared, oraInventory (/ US1/oracle/oraInventory, / oracle/US2/oraInventory and so on, all indicated by $ORACLE_HOME/oraInst.loc of each instance). We had a few incorrect oraInventory to clones of system files and database moves and they confused 12 c in making some incorrect associations. I have not run 11g to monitor SAP, so that might not be a problem for you.
Another suggestion, my SAP databases has slowed to a crawl and started running out of temporary space as soon as I brought in OEM and watched the target page DB, see MOS 748251.1 Note on his stats on X$ KCCRSR if you have any problems there.
-
Questions the agent (minimum distance of installation orders)
I have a few questions about agents for ODI.
First of all, lets say that I have a couple of agents set up for a production environment. We're in a box of SQL Server and is on a box of Essbase (just as examples). If I run a batch of OS file using the agent on the box of Essbase, the operating system batch file is running on this box Essbase? In other words, I don't have to set up some kind of special software (such as PSEXEC) or a script from the window to make the batch file of the operating system running on the remote server, would I? I guess that if I use the agent on the box of Essbase, because he just listen to and then sends the compiled code, that code would be executed on the Essbase server.
If I had but a single agent on SQL Server and you want to run a command on an Essbase server OS file, would be that batch file need to be put in place to be executed remotely?
In the second place, which must at least be installed on a server to create an agent on this box? The software ODI must be installed (so that drivers, the odiparms.bat file etc will be available for the agent) and then the agent installed through the command line (set up as a service). I suppose that if this is the case, there would be no need to change anything in the modules of topology or security, just to make sure that the drivers folder is updated and the odiparms.bat file is updated. However, is there a minimum amount of software that can be installed (essentially, the minimum of crude to get the agent works correctly).
Hope I'm being clear in my questions.
Thanks for your help,
MattMatt
You seem to have got it. An agent is a process that runs on a server. If you run an OSCommand of this agent, it is called on that server. So if you for example want to run an excerpt from SQL Server using BCP, you will have performed by the agent in your SQL Server box. The output file "land" on the server where the command was executed.To install an agent, you must still libraries etc. It runs as a Java application on this platform and requires the same etc. jdbc driver libraries that you use on the development environment. Use the Setup program to install, and there is only one installation of the agent. (if you cannot run the Setup program on your platform, then just move the directory oracledi to your installation media and configure the ODI_JAVA_HOME variable, and you are away.
C -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello dutchb,
The error, "another installation is in progress and must be completed first" can be attributed to the InProgress key found in the registry at:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CurrentVersion\Installer\InProgressChange the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
I suggest that first make a backup of the registry or a system restore point. Then go to control panel, administrative tools, Services. Do scroll down and find the Windows Installer service, and set the start at the stop State. Delete the registry key to the location above.
Now, you shouldn't get the installation in the progress message when you try to uninstall programs.
I hope this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error during installation of the agent on the monitored host Manager
Hi all
All in SOLARCOSY a manager of the agent in the host control, we are faced with this problem. Please could someone help me on this ASAP.
Please find the attached screenshot.
Kind regards
Shiva G
Please check this article, he talks about a similar error start agents, the solution may be the same
https://support.quest.com/SolutionDetail.aspx?ID=SOL116611&PR=Foglight
Title
Cannot start agents on Windows FglAM: no memory buffer space available JVM_BindDescription
Agents installed on an Agent Manager of windows may not start. The following errors appear in the journal of FglAM:
2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - cannot start
java.net.SocketException: no available buffer space (maximum number of connections reached?): JVM_Bind2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: could not stop the native Launcher
java.lang.NullPointerExceptionCause
The number of ephemeral TCP ports by default is 5000. Sometimes, this number can be less if the server has too many active client connections through which ephemeral TCP ports are all used to the top and in this case no more can be allocated to a new client connection request.
Resolution
Resolution
The solution is to open the registry editor and look for the registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and add a new entry, as shown below:
Value name: MaxUserPort
Value type: DWORD
Value data: 65534Workaround
Restart the Agent Manager Foglight
More information
-
installation of the agent on the vmware ESX Server
Hi, im trying to install the agent 2.7.6 on an esx server of vmware 3.01, somehow, the agent does not connect to the administration server, I opened the ports on the firewall of esx with esxcfg-firewall - openport port 7443 and 2144 but I still can not the agent to connect to the management server... everything I forget?
RgdsHi Nicky,
We will clear up the confusion of port for the next version. Regarding
availability be yellow, I believe that it is through the combination
the VMware API in 3.0 is much slower than ESX 2 times 20
VMS exposes this recently fixed issue: http://jira.hyperic.com/browse/
HHQ-437You can find a patch fixed the issue that should solve your
lights of availability. Let us know if that helps. It is also possible
to reduce the memory usage by disabling the plugins that vmware
Buy adding to agent.properties:plugins.include = VMware
You can also change the max heap size in agent.properties:
agent.javaOpts =-Xmx128mOn 15 January 2007, at 03:52, Haan Nicky wrote:
> okay... It's already better... but first, autodetect didn t
> work for hyperic settings, when you try to set it to 0 for the port.
> He complains the port must be between 1 and 65535.
> change the settings on the execution of the agent already has failed
> either, so I killed the admin machine and deleted data
> folder on the computer of the agent, after the reset and the
> the right credentials and port 443 (Please note that the)
> authd.client.port is 902... and not 443, check/etc/vmware/config
> for this authd.client.port = '902', so I obviously thought that of
(> What is necessary in the settings, maybe just state port 443 here?) I have
> then started the inventory, which is quite long (10 minutes) and
> memory and CPU was quite up on the esx Server (this is a double quad
(> xeon machine with 16 concerts and about 20 vitrual machines running)...
> the agent runs now, but somehow I think that the moment a large number,
> availability is always on the yellow... I think that the agent
> must refine even more here... on an esx 3.0 server there are only
> 1 cpu and limited memory available for the linux Machinehote...
> maybe it's not enough for the agent?
>
Maybe you are looking for
-
Some programs do not work on my Satellite L300-1AS
I have a laptop - Toshiba Satellite L300-1AS with Windows Vista installed. Lately, I have troubel with some fair programs now, I tried to reinstall 'Java' and I got the message "there is a problem with the Windows Installer Package. "A program run as
-
I just got rid of a virus like look of Microsoft, I lost all programs, photos, etc.
-
Blue screen on Windows Vista - Stop 0x7B
My laptop won't come all the way that it goes to screen and then this blue screen comes to talk about something with the hard drive. And I can't go down. I turned on and outside, like 10 times! Someone help me please this down so I can use my laptop.
-
Recovery Manager, you want to do a backup via USB no drive
USB instead of disc using dvd - R, will not let me proceed .i want to make a copy, so if I have problems I can fix my computer. Using Recovery Manager
-
Charger for HP Pavilion Elite e9140f 9V power
Hello I have a HP Pavilion Elite e9140f desktop computer. The power supply fan makes little noise. I would like to replace his power. What are the replacements recommended for this? Thank you! MKG