Similar Questions

• Foglight Agent Manager 5.6.6

  Hello

  Currently, we are on Foglight Agent Manager 5.6.2 and we want to go to Foglight Agent Manager 5.6.6.

  Should install us Foglight Agent Manager 5.6.6 or we should go to?

  I can't find the Foglight Upgrade Guide on support.quest.com.

  Thanks for the help.

  5.6.7.2 fglam is the most recent (but also an additional patch for 5.6.7.3)

  Upgrade from FMS guides can be extracted from edocs.quest.com

  David Mendoza

  Foglight Consultant

• I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  George, was the question that you asked:

  "How can I find the IP addresses of remote hosts being monitored?

  or

  "How can I find the IP address of the FGLAM server that is monitoring?

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• BSoD - error DRIVER_OVERRUN_STACK_BUFFER and chart use disc in the Task Manager showing constant 100% graphic

  All of sudden it began to show "BSoD - error DRIVER_OVERRUN_STACK_BUFFER" and while the system is turned on, it displays "chart use disc in the Manager of tasks showing constant 100% graphic.

  Friends, this is

  IT HAS THE FILE INFO MINIDUMP AND ZIPPED SYSTEM.

  Please go through it and help me friends :(

  SkyDrive link: https://onedrive.live.com/redir?resid=3CFADFC6344DFA0A%21263

  It worked, thanks!

  All attached files of the DMP are the verification of bug DRIVER_OVERRAN_STACK_BUFFER (F7) .

  This indicates that a driver has saturated a stack-based buffer.

  A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned.

  2: kd > k
  Call child-SP RetAddr site
  fffff880 '192edc58 fffff880' 03da0f6e nt! KeBugCheckEx
  fffff880 '192edc60 00000000' WinFLAdrv + 0x3f6e 000000f7
  fffff880 '192edc68 00fff880' 6d2ebda0 0xf7
  fffff880 '192edc70 0000f880' 03da3019 0x00fff880'6d2ebda0
  fffff880 '192edc78 ffff077f' fc25cfe6 0x0000f880'03da3019
  fffff880 ' 192edc80 00000000 00000000 of ' 0xffff077f ' fc25cfe6

  WinFLAdrv.sys invaded a buffer based on the stack, so called bug control. It is a pilot

  associated with the Service of NewSoftwares.net WinFLAdrv.sys Application. Uninstall ASAP!

  Kind regards

  Patrick

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and has already managed to success

  Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully.  It's the exact error message, there is NO error code!   It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum.   PLEASE ANSWER!

  

  Hi tracyes31040766,

  If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know how it goes.

  Kind regards

  Nicos

• Compellent Replay Manager and VSS

  Hi all

  I am a new user of Replay Manager and I'm testing inside and sandbox environment.

  I installed Replay Manager Services 7.0 on a physical Windows 2003 R2 x 64 server and tried to program in accordance with replays of the management tools Manager Replay--> all work perfectly.

  But this server is also supported by our company backup tool: Symantec Backup Exec 2010 R3. I noticed that whenever a VSS backup is initiated by BackupExec, a coherent reading is done on the HDS. Is this normal? Can disable us this behavior?

  Thanks in advance,

  Kind regards.

  Teo.

  Finally, I found the solution:

  Symantec Backup Exec Agent installed on windows system has a default setting to choose the right provider VSS: this parameter is 'automatic selection '.

  With this automatic selection, the agent chooses the VSS provider Replay Compellent, instead of the microsoft VSS provider service. And so, the backup exec task triggers a replay on the Compellent storage system!

  Solution: change the task parameter to force 'Microsoft's VSS provider' instead of 'automatic selection '.

• I can't install any adobe application. I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrated

  I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrating because I've already paid for them. Is a 2nd hand computer, but I erased everything when I bought it.

  Working on a mac osx, report looks like this

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DS013 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s) WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1 ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Dynamic Link Media Server: Install failed ERROR: DW050: - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050: - Adobe XMP Panels: Install failed ERROR: DW050: - Adobe Player for Embedding 3.3: Install failed ERROR: DW050: - Required Common Fonts Installation: Install failed ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Utilities CS6: Install failed ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed ERROR: DW050: - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050: - Camera Profiles Installer: Install failed ERROR: DW050: - AdobePDFL CS6: Install failed ERROR: DW050: - Adobe Extension Manager CS6: Install failed ERROR: DW050: - Adobe Bridge CS6: Install failed ERROR: DW050: - AdobeTypeSupport CS6: Install failed ERROR: DW050: - AdobeHelp: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050: - Adobe Mini Bridge CS6: Install failed ERROR: DW050: - Suite Shared Configuration CS6: Install failed ERROR: DW050: - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050: - Adobe Media Encoder CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050: - Photoshop Camera Raw 7: Install failed ERROR: DW050: - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050: - Adobe Encore CS6 Support: Install failed ERROR: DW050: - Recommended Common Fonts Installation: Install failed ERROR: DW050: - DynamiclinkSupport: Install failed ERROR: DW050: - AdobeCMaps CS6: Install failed ERROR: DW050: - Adobe CSXS Extensions CS6: Install failed ------------------------------------------------------------------------------------- 
  Now as stated I have tried several different download methods, removed all firewalls & antivirus. Any Suggestions???
  

  The system configuration required

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DS013 ...  -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s)  WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1  ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Dynamic Link Media Server: Install failed ERROR: DW050:  - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050:  - Adobe XMP Panels: Install failed ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed ERROR: DW050:  - Required Common Fonts Installation: Install failed ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Utilities CS6: Install failed ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050:  - Camera Profiles Installer: Install failed ERROR: DW050:  - AdobePDFL CS6: Install failed ERROR: DW050:  - Adobe Extension Manager CS6: Install failed ERROR: DW050:  - Adobe Bridge CS6: Install failed ERROR: DW050:  - AdobeTypeSupport CS6: Install failed ERROR: DW050:  - AdobeHelp: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed ERROR: DW050:  - Suite Shared Configuration CS6: Install failed ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050:  - Adobe Media Encoder CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050:  - Photoshop Camera Raw 7: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050:  - Adobe Encore CS6 Support: Install failed ERROR: DW050:  - Recommended Common Fonts Installation: Install failed ERROR: DW050:  - DynamiclinkSupport: Install failed ERROR: DW050:  - AdobeCMaps CS6: Install failed ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed -------------------------------------------------------------------------------------
  

  The system configuration required

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• EliteBook 8570p: BCU and SCCM 2012 WinPE10 error 0x0000000A and task sequence 0x0000000B

  I am trying to run an OSD task sequence in SCCM 2012 to set the BIOS Setup, secure TPM activation and switching to native mode UEFI in preperation for BitLocker, then BIOS password setting all of in WinPE. The command below works fine when connected to the laptop in full Windows 10 cmd prompt, but for some reason I get and error when trying to run task sequence command.

  Using the version of the NBU: 4.0.13.1

  Version of WinPE 10 x 64: 10.0.10240.16384

  "' RunBCU.cmd /setconfig:"Config\8570pconfig.repset' /cspwdfile:"Config\oldpassword.bin ' /nspwdfile:"Config\newpassword.bin '.

  Where are the log files of the utility?

  What does the error 0x0000000A and 0x0000000B?

  What Miss me?

  Any help would be much appreciated. Thank you.

  Please, look at the white paper following developed to help understand how to manage the TPM and also not recommended for SCCM

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/whitepapers/building, %20Deploying,%20and%20Updating%20an%20Image%20on%20HP%20Commercial%20PCs.pdf

  other whitepapers are available from www.hp.com/go/clientmanagement

  BTW, it seems that you must set the pwd BIOS FRONT to manage the TPM

• Error handling and the basic flow data

  Hello

  I'm learning the basic error data and flow management. The seal is a simple VI to implement this.

  How do I implement this code to display an error.

  Thank you.

  You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values.  Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.

  And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.

  -DP

  BatchTest Corp.

  NEITHER Alliance Partner

• Error 646 and 80070652

  Well, I've experienced this before, and it seems every time I have to send my laptop for service, this problem occurs.
  Luckliey you guys saves always the day even if it just takes a time.
  Thank you by the way.

  Well, I have Vista Home Premium w/SP1 32-bit edition. I have a Hp Pavilion dv6000.  I tried to update usually coming from the center of update of windows and in particular
  Security update - KB977304
  Microsoft Office Update - KB951550 KB951944, KB973704
  Microsoft Office Service Pack 2 - (SP2)
  Info - KB976416 path
  Word - KB974561
  System - KB967642
  Then he fails every time and I went through the nets and tried the computer left click then the tab manage and systems and tried to restart, I guess you mean the windows installation program and it does not work.  I thought my cd for Vista input and make the retooling or you want to call.  But what stops me, it's the Service Pack 2 update.  So do not know what to do please help if you can.  Thank you bouquets and you guys rock!

  Have you actually tried to download Office updates manually and install - it's the most common way of treating of the error 646.
  Start looking here: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB951550&displaylang=en&stype=s_basic

  Perform these tasks in chronological order. TaurArian [MVP] 2005-2010 - Update Services

• Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?

  Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator.  Sony supporting not - how make to identift video card in my laptop?

  Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.

  In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.

• What is error 5 and how to fix it?

  I went to computer management and for the Services, I tried to change some things and I get error 5. I do this because I can not install my printer, she telling me something about being not installed print spooler. What can I do about this error 5 and what is the cause?

  Hi, LorettaHarnarine

  ·         Do you receive with the error code 5 error messages?

  ·         What causes the error?

  ·         Were there recent changes made on the computer before the show?

  Please let us know the exact error message when you receive the error code 5 and on which the service is giving the error, so that we can help you further. In the meantime I suggest you to follow the steps in troubleshooting this article and check if it helps to solve the problem of the printer.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows