embority singer used with old portable new computer laptop does not load software
I have a sewing machine singer ebrodiry I used with my old laptop with the new laptop dosent load software and it does not recognize the sewing machine which can make
Hello
What operating system do you use?
I suggest you to follow the links and check out them.
If you use windows vista refer; Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
If you use windows7 refer the link and check.
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
I also suggest you to reach the center of singer and check.
Tags: Windows
Similar Questions
-
HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.
Please return to the message sent to you.
-
How can I load eLearning Suite 2.5 on my new computer that does not have a hard drive?
How can I load eLearning Suite 2.5 that I bought a year ago on my new computer that does not have a hard drive?
If you follow the 7 steps (list here, http://prodesigntools.com/adobe-cs6-direct-download-links.html) you can dl a free trial here: http://prodesigntools.com/adobe-captivate-5-and-elearning-suite-2-now-shipping.html/commen t-page 1
and activate it with your serial number.
If you have a problem dl'g, you don't follow all 7 steps. the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
-
How can I download my photoshop on my new computer that does not have a hard drive
How can I download my photoshop on my new computer that does not have a hard drive
Hello
What version of Photoshop?
You can choose and download earlier versions of CC here: other downloads
Concerning
Jitendra
-
Original title: Please HELP
When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
Method 2:
Also, try to run the safe mode System File Checker and check if it helps:
http://support.Microsoft.com/kb/929833Method 3:
Be sure to run a full scan with your antivirus software.
http://www.Microsoft.com/security/default.aspx
It will be useful.
-
On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xp
Thank youPosing for the PC model, you show that you do not know the answer, it was a software problem, but you're right, it's a Dell.
In any case, I found the answer elsewhere, must with the boot.ini file on XP -
New battery problem - does not load.
My first battery died after 3 years. I bought a new one and it does not load. Any ideas?
Yes, the power button on the laptop.
Is it a leader in the battery... it turns the laptop?
If you hover over the battery icon it signals any charge?
You can also try (including some report success with) a similar procedure to turn the PC off, remove the battery and power supply and then now button / stop for 20 to 30 seconds as before.
Now, plug in current first and then insert the batteries.
It's something I've never tried and for me is almost the same as "hot swapping" a battery although many report it resets a battery no load. Maybe research all first if your laptop supports 'Exchange hot' batteries.
-
Brand new 32Gig touchpad does not load
When the touchpad is connected to a wall outlet with the original cable and plug, the Touchpad indicates that the input current/voltage is not sufficient and the touchpad can not load correctly. Well, it does not load and I unscrewed and screw such upward as mentioned in another post, but it does not work. I also used a different cable and another wall charger (my phone update from samsung, the lable of voltage/current seems to be the same) and I get the same message.
I have hard reset a couple of times, and it does not help.
Is there anything else I can try? Is this touchpad a dud? Too bad I don't think I'll be able to get another one as it is out of stock everywhere.
Well, I had the problem figured out. I chatted with support yesterday (almost 45 minutes), tried all sorts of things and nothing worked. They suggested that I come back to Best Buy and ask them to check it out. Same thing was going on there. They changed the Chargers and same problem. In the end, they tried a different cable and voila, it started to load.
I have although the cables are either it works or it doesn't work, but apparently the USB cable can still send a signal, but maybe not enough amperage. They had no more keys to touch to swap and no cable to give me and suggested I buy one, but I wil see if HP here will be able to help. I'm sure they are good markets at monoprice in the worst cases.
I hope this helps someone else, problems with their touchpad not charging / not turing on.
-
I have copy of CS5 on the old laptop and really need to do on my newer computer operating system windows, but the purchased disk was originally lost. Help please I have improved my cameras and they are not supported in CS3 and I don't want to bother with the DNG Converter. Looking at the details of loading originally in 2010 I have only 20 digits of the serial number that I need to finish loading on the new computer from 24.
I hope someone can help please
If your software is still running on your old machine, you can try to save it now. See if there is an Option in the Help menu. If it works, you don't need to know your serial number to get the software registered, but your number will subsequently indicate in your adobe account.
-
new battery but computer still does not load
I just bought a new battery and the computer will not charge it. It is said to replace the battery.
Hello
Check with the vendor Support from Dell, their documentation online, and battery diagnostics, drivers.
and ask questions in the Dell forums about known issues. Some manufacturer issued BIOS and other updates
for help with battery problems.-----------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how or)
How long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have online forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Taking care of your laptop battery
http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-batteryBattery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I bought CS6 disk for my computer a couple of years ago. This computer doesn't work anymore so I have a new but this computer does not have a disk drive. I was wondering if there is a way for my CS6 download on this new computer without having to buy a new copy. I still have the box and all the codes. Thank you
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
New Windows 7 Asus computer laptop does not connect to internet
ASUS A52JR - X 1 laptop computer
He'll find a network. It doesn't let me access the network files. It does not connect to the internet, but it's getting an IP address. DNS does not, even if it has the IP of the router listed as a DNS server.
I disabled IPv6 based on other peoples problems, but it doesn't seem to help. I tried to update the driver for the CARD, but it doesn't seem to help. I'll try update driver video, to see if it helped, but the pilot was not available on the main site (Radeon 5470) and I don't know how it would be useful anyway.
Diagnose Windows said try restarting the router, which I did, but it did not help. If I skip this step, said diagnosis "the default gateway is not available."
There is also a tunnel of the card, even after disabling IPv6. I don't know if this is normal or not.
Any help would be appreciated.
What router are you using? You can turn off proxy DNS? If this is notpossible, you should be able to get the IP addresses of the DNS servers of your ISPand configure those statically. The use of routers IP means that the router isProxy DNS. Looks like proxy DNS does not work.On Wednesday, may 5, 2010 14:31:07 + 0000, Tedsternator wrote:> ASUS A52JR - X 1 laptop>> It will find a network. It doesn't let me access the network files. It does not connect to the internet, but it's getting an IP address. DNS does not, even if it has the IP of the router listed as a DNS server.>> I disabled IPv6 based on other peoples problems, but it doesn't seem to help. I tried to update the driver for the CARD, but it doesn't seem to help. I'll try update driver video, to see if it helped, but the pilot was not available on the main site (Radeon 5470) and I don't know how it would be useful anyway.>> Diagnose Windows said try restarting the router, which I did, but it did not help. If I skip this step, said diagnosis "the default gateway is not available.">> There is also a tunnel of the card, even after disabling IPv6. I don't know if this is normal or not.>> Any help would be appreciated.Barb Bowman www.digitalmediaphile.com
-
When I reset my apple ID and password for the new computer, it does not start installation
When I reset my apple ID and password for the new computer, it is as I entered the wrong password. This happens time and again @
My problem was solved, thanks anyway.
-
Update Vista crashed my computer - Windows does not load
I installed the Vista updates this weekend (02/01/09) on my HP Pavilion dv4. It appeared to download without any problem, but then he asked me if I would like to restart now, and when I did it, Vista will no longer. The file that it is identified as a problem is WMM2AE.dll. I took the computer to Best Buy (it is still under warranty), but it seems that I may need to reinstall the operating system. Does anyone have any suggestions to solve this problem? Research on the web, it seems that there are MANY problems with Windows updates.
samantha22,
I would first try to use the start option last good known in the Advanced Boot options screen. If this does not work you can use Package Manager to remove the update that was installed.
Depending on your recovery media, you may be able to perform an installation that would move your current Windows folder and does not erase your information. But I hope that we won't get to this point. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Computer laptop does not recognize not the charger.
Original title: charger delivers
My computer continues to give the message that it does not recognize the charger of my computer and is told to use a Dell charger - I use the Dell charger supplied with the computer.
Is this a connection problem or is the battery discharged?
Hello
Thanks for posting! If I understand correctly, you are facing problems with the loading of the computer. Correct me if I'm wrong!
Before I continue, I would like to collect some personal information.
1. have there been recent changes to the system before the show?
2. What is the brand and model of the computer?
Method:
Follow the link and run the fix it convenience store. Check if it helps.
The problems of power consumption and extend laptop battery life
http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
Reference: http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=51941
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266440
If the problem persists, I suggest you to contact the manufacturer.
Answer us with the results. I'd be happy to help you further.
Maybe you are looking for
-
OfficeJet pro 8625: officejet pro 8625 will not accept photo paper
New printer works fine on standard paper. It does not (food) photo paper. I just replaced same 8600 model who would accept the photo paper. Any thoughts? Thank you
-
My computer was las night. I turned it on this morning and it says the auto repair or please wait a few seconds then screen goes black or white. It doesn't let me do anything else. It is located on a white screen. Help, please
-
To watch TV via ethernet using the Freeplayer software
Hello Recently, I installed a FREEBOX ADSL connection at home [http://en.wikipedia.org/wiki/Freebox]. I have a TV router with this connection.I connected the router to my laptop via an Ethernet cable. And downloaded and installed a player named "Free
-
Question of tree control column - hot/indicator
Is it possible to have some columns in a tree control will be hot (Edition) and others as indicators (no parameter)? It seems as if all columns (except the first column "0th") must be all hot or all indicators. I also looked in the attributes of th
-
"Operation requires an interactive window station. What does that mean?
Currently, I'm unable to install USB flash drives. The "new hardware found" Wizard, but always results in windows encounters a problem, saying that it can not install drivers because the "Operation requires an interactive window station. Can someone