[Emergency] sqlplus gets "error 5 Initializing SQL * more NLS initialization.

Similar Questions

• Error 57 Initializing SQL * more

  I'm not able to start sql plus. It gives me the error message below. I didn't no problem when I worked a month back, but now when I start again, it gives me this error. In the meantime, the only change that I brought in my PC is installing Kaspersky Antivirus and do the analysis complete?
  
  Error 57 Initializing SQL * more
  Error while loading shared libraries of message
  
  Thank you

  Hick says:
  I'm not able to start sql plus. It gives me the error message below. I didn't no problem when I worked a month back, but now when I start again, it gives me this error. In the meantime, the only change that I brought in my PC is installing Kaspersky Antivirus and do the analysis complete?

  Error 57 Initializing SQL * more
  Error while loading shared libraries of message

  Thank you

  This error is triggered when you start at the beginning of the treatment for sqlplus and is, by nature, rather generic. Given that it is triggered during initialization, it is quite possible that not all libraries that may be required for additional details (such as localized error messages) are loaded.

  The only thing you mention has changed is installation of Kaspersky, which suggests that it blocks a library required to be loaded. This error can also be triggered in case of memory (which would also prevent the loading required libraries, etc.).

  Here is a simple test you can do by way of illustration (obviously not on a production system, etc.):

  $ cd \Oracle\11.2\database\BIN
  
  $ dir /s /b oraclient11.dll
  C:\Oracle\11.2\database\BIN\oraclient11.dll
  
  $ rem temporarily rename the Oracle RDBMS Client Library for testing
  $ ren oraclient11.dll oraclient11.dll.save
  
  $ rem this will raise error 57 since a required library could not be loaded during initialization
  $ sqlplus.exe /nolog
  Error 57 initializing SQL*Plus
  Error loading message shared library
  
  $ rem be sure to change back!
  $ ren oraclient11.dll.save oraclient11.dll
  

  Kind regards

  Mark

• get my IPAddress through sql * more

  Hello all;
  
  I tried to use
  

  select sys_context('Userenv', 'ip_address') from dual;

  to get my ip address and it's back a white, again I tried to use
  

  select utl_inaddr.get_host_address('johnp') from dual

  and it gives me the following error below
  

         *
  ERROR at line 1:
  ORA-24247: network access denied by access control list (ACL)
  ORA-06512: at "SYS.UTL_INADDR", line 19
  ORA-06512: at "SYS.UTL_INADDR", line 40
  ORA-06512: at line 1

  and I give all the subsidy required to the user associated with the help
  

  grant execute on utl_inaddr to financecc;

  Published by: user13328581 on March 13, 2012 08:06

  user13328581 wrote:

  I know Ipconfig in the command windows... and I know the difference between the client and the server computer. I'm doing a simple test that is to know if there is an ip address any available when you have a client and a server running on the same computer

  The server will see IP address of the client in this case if the client-server connection has been made by IP. A local connection using CPI (direct process-to-process communication). No IP involved. And so the server does not recognize the customer as a client IP.

  Example:

  // local connection that does not use TCP/IP
  /usr/lib/oracle/xe> sqlplus "/ as sysdba"
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 14 18:10:16 2012
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> select sys_context('user', 'ip_address' ) as CLIENT_IP from dual;
  
  CLIENT_IP
  ---------------
  
  SQL> exit
  

  Only when the client is an IP connection, the server has the means to determine the IP address of the client. For example

  // force a TCP/IP connection via the Listener via localhost
  /usr/lib/oracle/xe> sqlplus scott/tiger@"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)) (CONNECT_DATA=(SID=vlk)))"
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 14 18:12:14 2012
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> select sys_context('user', 'ip_address' ) as CLIENT_IP from dual;
  
  CLIENT_IP
  ---------------
  127.0.0.1
  

  by the way your syntax

  ! ipfconfig> 
  

  does not work, it gives the following errors below

  It depends on where run you it from. This command is intended for SQL * more and gives instructions to create a child process that calls the operating system command line. For example

  SQL> ! /sbin/ifconfig eth0
  eth0      Link encap:Ethernet  HWaddr 70:71:bc:ac:3d:49
            inet addr:10.251.93.30  Bcast:10.251.93.255  Mask:255.255.255.0
            inet6 addr: fe80::7271:bcff:feac:3d49/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:17171605 errors:0 dropped:2200 overruns:0 frame:0
            TX packets:9055411 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000
            RX bytes:11744534737 (11.7 GB)  TX bytes:1429625375 (1.4 GB)
            Interrupt:20 Memory:fe400000-fe420000
  
  SQL>
  

  This isn't a PL/SQL statement (language server).

  Note that all side code Server (SQL and PL/SQL) is sent by SQL * more to the server process. In addition, SQL * Plus itself has a primitive vocabulary control and these commands it runs on the client.

  This is why I pointed to the possible confusion of client-server, because there is a very clear and definitive separating SQL * more and its commands and the Oracle server and its languages SQL and PL/SQL.

• an error occurred initializing SQL Server compact etc... any help?

  I must have deleted something while I was cleaning on some software that address any suggestiions?

  Hi Ptolemy,

  You get this error message is because an application is in an unknown state or an update of the application has been interrupted.  Usually, this is related to the Vaio Messenger.  VAIO Messenger is a tool that allows Sony to communicate directly with users with the latest information about management of PC, updates and supply.  Please follow the steps in the link below to fix the problem.  Need Adobe reader to open the file.  I hope this will solve your problem.

  http://www.DDNI.com/vmsupport/documents/VAIO%20Messenger%20Uninstall%20and%20Reinstall%20For%20Custo...

  http://Get.adobe.com/Reader/ - adobe reader software

  Nick-

• Lost my discs to fix computer - I keep getting errors in SQL Editor after updating everything, the patches do not work

  I've already updated and download the patches to remove HP with Windows XP, I always get error messages about SQL writer indicating the library has been corrupted and reinsert it doesn't tell me which library or where it is located and all microsoft help doctor's visits did not solve the problem nor has take it to a computer fix place0 which was a waste of $100,00 ~!

  Discs that I got for my computer does not appear in the shot and I have no way to fix my computer that I use for home based work.

  Could someone finally help me before I throw this computer out the window? It was more expensive that it was supposed to for be to work online - incidentally does not have Norton antivirus to prevent viruses!

  Hi Jen98051,

  1. when exactly you get the error message?
  2. What is the exact error message?

  We recommend that you restore the computer and check if the problem persists.
  see How to restore Windows XP to a previous state .
  b. Once you restore the computer to an earlier time, restart the computer and check the difference.

  If nothing works, then please provide us with more details on the issue, so that we can help you further.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SQL more s in shell script

  Hi people
  
  I have this code in my shell script, but I get the below error please check
  

  sqlplus -s scott@xyz/tiger @1.sql > 1.log
  
  and oracle home is 
  
  /oracle/app/oracle/product/11.2.0/dbhome_1
  
  error thrown is
  
  Error 6 initializing SQL*Plus
  SP2-0667: Message file sp1<lang>.msb not found
  SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
  
  i have checked i have sp1us.msb 

  Please help me on this

  Newbie says:
  Mr President, I gave my oracle home.

  How to check if she properly o?

  No, you said that you believe that oracle_home should be. But you have NOT proven that it was properly defined in the session that threw the error and the error itself is almost certain evidence that it was NOT set correctly. And your assertion that the referenced file exists (again, your assertion, not proof) gives more weight to the evidence that ORACLE_HOME is not set correctly.

  Run the following commands, and then copy and paste the whole session (complete order, full power) to your next assignment

  env |grep ORA|sort
  echo $PATH
  sqlplus -s scott@xyz/tiger @1.sql > 1.log
  

• Connection to the 11g on Oracle_Developer_Days.ova with sql + more

  I downloaded the Oracle_Developer_Days.ova and have confirmed with connectivity

  C:\Users\robm > ping ServeurOracle

  ServeurOracle ping [192.168.11.18] with 32 bytes of data:

  Reply from 192.168.11.18: bytes = 32 time < 1 ms TTL = 64

  Reply from 192.168.11.18: bytes = 32 time < 1 ms TTL = 64

  Reply from 192.168.11.18: bytes = 32 time < 1 ms TTL = 64

  Reply from 192.168.11.18: bytes = 32 time < 1 ms TTL = 64

  Ping statistics for 192.168.11.18:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Users\robm >

  I have advanced and installed the client instant and also installed the sql + more

  C:\Users\robm > sqlplus scott/tiger@orcl

  SQL * more: Production of the 12.1.0.1.0 on sat Nov 30 00:27:44 version 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12514: TNS:listener is not currently of service requested in connect

  descriptor of

  Enter the user name:

  Here the tnsnames.ora can, I did you see errors?

  XRACQ_MYSERVICE_TAF =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oracleserver) (PORT = 1521))

  (LOAD_BALANCE = yes)

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  (FAILOVER_MODE =

  (TYPE = SELECT)

  (METHOD = BASIC)

  (RETRIES = 180)

  (DELAY = 5)

  )

  )

  )

  any ideas on how to make it work?

  I now get

  ORA-01017: name of user and password invalid. connection refused

  using tsnames.ora

  WEIRD =.

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADRESSE = (PROTOCOL = TCP) (HOST = 192.168.11.18)(PORT = 1521)))

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  so I seem to connect now... . How can scott Tiger be wrong isn't the default?

• How to return an error code of SQL * Plus of PL/SQL procedure

  Hello
  
  I want to be able to pass a variable back to the Unix script, and I have the following code
  
  ******************
  
  sqlplus/myuser mypass < < EOF
  WHENEVER SQLERROR EXIT 41.
  WHENEVER OSERROR EXIT 81;
  execute pkonp.run_onp;
  output
  EXPRESSIONS OF FOLKLORE
  
  ERRORCODE = $?
  
  If [$ERRORCODE! = 0] #test for successful onp
  then
  #Notify failure of the administrator of the ONP.
  echo 'Fail ONP to 'date' \n'
  FI
  
  ******************
  However, I am unable to get my PL/SQL to pass an error code to SQL * more.
  
  How to catch an error in PL/SQL and pass the SQL error code *, so that SQL * Plus can then pass the error to the Unix Shell script?
  
  Thank you very much.

  Yes - in a nut shell, you need to convert Oracle codes exception to the process of Linux/Unix/Windows exit codes as the number of exception Oracle is physically too large to fit into an integer to a byte that is used by the operating system for the exit codes.

  The best place to do this would be something like a SQL * more script as is the process real o/s which should only return exit code of the kernel.

• PLS-00201 error occurs when the batch a stored procedure in SQL * more

  I have a batch file to run a stored procedure and the coil results in file. When I enter orders manually in sql * plus the output works very well and my results are spooling in the output file. But when I run the same commands in the script I get an error batch.

  
  Any ideas?

  Stored procedure:

  create or replace procedure MMP (p_cursor in the SYS_REFCURSOR)

  as

  Start

  Open p_cursorfor select name, id from table;

  end;

  batch file 1:

  sqlplus-s user/pw@REPORTDV @sp_output_spooled.sql

  sp_output_spooled.SQL script file

  Paste these commands directly on the SQL * more guest wraps the result as expected the value leader.

  the colsep value ' |'

  trigger the echo

  Set feedback off

  termout off Set

  set the position

  set linesize 9000

  set pagesize 0

  Set trimspool on

  headsep off Set

  output of the coil. TXT

  var refcursor rc

  run MMP(:rc)

  print the rc

  spool off

  output

  Errors printed to the output. TXT file after the batch is executed and error occurs:

  BEGIN MMP(:rc); END;

  *
  ERROR on line 1:
  ORA-06550: line 1, column 8:
  PLS-00201: identifier 'MMP' must be declared.
  ORA-06550: line 1, column 8:
  PL/SQL: Statement ignored

  
  ERROR:
  ORA-24338: statement handle not executed

  
  SP2-0625: variable printing error "rc".

  Hello

  Your code worked fine for me.

  Procedure MMP is owned by the same user that runs the batch file or does it means and appropriate privileges?

  VR,

  Sudhakar

• When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3__

  When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3. I don't know how to solve this problem. Thank you.

  Hi torito63,

  Error 0X737D while updating Windows means that a previous update of Microsoft SQL server does not complete the installation.

  To complete the installation, follow the steps below:

  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.

  2. Select Microsoft SQL Server 2005 and then click on edit.

   3. from currently installed programs, select Microsoft SQL Server 2005 and then click on edit.

   4. in the selection of the components, select database engine and then click Next.

   5. in the maintenance of function, select database engine and then click Next.

   6. in the installation of Microsoft SQL Server 2005, click Next.

   7. in the System Configuration check, click Next.

   8. change or remove an Instance, click on complete the suspended installation.

   9. by error and usage report settings, click Next.

   10. in the ready to update, click on install.

   11. in the course of a configuration, click Next.

   12. click on finish.

   For more information, read the messages in the thread titled I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/40db346c-6439-4484-9589-c78b326f5056/

  Check if it works for you. Post back and we do know.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• SP2-0642: SQL * more internal error of State 2165

  Hello

  I was faced with the question with sqlplus suddenly in 11.2.0.3 throw version on solaris 10 OS, it was working fine until today. No changes made on this (11.2.0.3.Q3) oracle home, but new ORACLE HOME installed by Server DBA (shared server) with the Q4 patch.

  -bash-3, $2 sqlplus / as sysdba

  SP2-0642: SQL * more internal error state 2165, context 4294967295:0:0

  Impossible to continue

  As explained in metalink note: 396154.1, I set NLS_DATE_FORMAT, but it doesn't seem to work

  also, I've checked the timezone as explained in the blog file, but the file timezone.dat does not exist in 11.2.0.3 version and all the files in $ORACLE_HOME/oracore/zoneinfo/have permissions of reading to the dba group

  http://arjudba.blogspot.com/2010/07/non-Oracle-user-hits-SP2-0642-or-SP2.html

  -bash - $3.2 ls - ltr

  30942 total

  -rw - r - r - 1 oracle dba readme.txt 6068 7 June 2010

  -rw - r - r - 1 oracle dba 31525 June 7, 2010 timezdif.csv

  -rw - r - r - 1 oracle dba 351525 Aug 21, 2011 timezone_9.dat

  -rw - r - r - 1 oracle dba 302100 August 21, 2011 timezone_8.dat

  -rw - r - r - 1 oracle dba 286815 Aug 21, 2011 timezone_7.dat

  -rw - r - r - 1 oracle dba 286217 Aug 21, 2011 timezone_6.dat

  -rw - r - r - 1 oracle dba 286310 Aug 21, 2011 timezone_5.dat

  -rw - r - r - 1 oracle dba 286264 Aug 21, 2011 timezone_4.dat

  -rw - r - r - 1 oracle dba 286651 Aug 21, 2011 timezone_3.dat

  -rw - r - r - 1 oracle dba 274900 August 21, 2011 timezone_2.dat

  -rw - r - r - 1 oracle dba 344448 Aug 21, 2011 timezone_14.dat

  -rw - r - r - 1 oracle dba 344425 Aug 21, 2011 timezone_13.dat

  -rw - r - r - 1 oracle dba 345024 Aug 21, 2011 timezone_12.dat

  -rw - r - r - 1 oracle dba 345356 Aug 21, 2011 timezone_11.dat

  -rw - r - r - 1 oracle dba 345637 Aug 21, 2011 timezone_10.dat

  -rw - r - r - 1 oracle dba 274427 Aug 21, 2011 timezone_1.dat

  -rw - r - r - 1 oracle dba 801410 Aug 21, 2011 timezlrg_9.dat

  -rw - r - r - 1 oracle dba 616723 Aug 21, 2011 timezlrg_8.dat

  -rw - r - r - 1 oracle dba 601242 Aug 21, 2011 timezlrg_7.dat

  -rw - r - r - 1 oracle dba 586750 Aug 21, 2011 timezlrg_6.dat

  -rw - r - r - 1 oracle dba 587487 Aug 21, 2011 timezlrg_5.dat

  -rw - r - r - 1 oracle dba 531137 Aug 21, 2011 timezlrg_4.dat

  -rw - r - r - 1 oracle dba 527717 Aug 21, 2011 timezlrg_3.dat

  -rw - r - r - 1 oracle dba 507957 Aug 21, 2011 timezlrg_2.dat

  -rw - r - r - 1 oracle dba 791430 Aug 21, 2011 timezlrg_14.dat

  -rw - r - r - 1 oracle dba 782475 Aug 21, 2011 timezlrg_13.dat

  -rw - r - r - 1 oracle dba 785621 Aug 21, 2011 timezlrg_12.dat

  -rw - r - r - 1 oracle dba 787272 Aug 21, 2011 timezlrg_11.dat

  -rw - r - r - 1 oracle dba 792894 Aug 21, 2011 timezlrg_10.dat

  -rw - r - r - 1 oracle dba 493675 Aug 21, 2011 timezlrg_1.dat

  drwxr-xr-x 2 oracle dba 30 Sep 8 05:03 big

  drwxr-xr-x 2 oracle dba 30 Sep 8 05:03 little

  Please suggest alternatives to troubleshoot

  Thank you

  Sol.beach thanks for the reply, I'm able to correct the problem. In fact the PATH variable has put in .profile of export PATH = $PATH: $ORACLE_HOME/bin and the value is lower.

  -bash-3, $ 2 echo $PATH

  /Apps/Oracle/product/9.2.0.8.2009Q4/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/bin:.:/ bin:/opt/bin:usr/CSS/bin:/usr/ucb:/usr/local/bin:/apps/Oracle/product/11.2.0.3.2014Q3/bin

  I changed as export PATH = $ORACLE_HOME/bin: $PATH and now it works fine. It seems to be a problem with the old Oracle Home, also present in the PATH variable before the bin to the current address of Oracle Home Directory.

  -bash-3, $ 2 echo $PATH

  /Apps/Oracle/product/11.2.0.3.2014Q3/bin:/apps/Oracle/product/9.2.0.8.2009Q4/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/bin:.:/ bin: / opt/bin: css/usr/bin: / usr/ucb: / usr/local/bin

  Concerning

• trying to get used to sql * more running and creating a simple procedure

  Hello all;
  
  I'm getting used to sql * more after using for a while using pl/sql developer.
  
  I am trying to create a simple procedure and run it. See my procedure below
  

  create or replace procedure test(t in varchar2(200), limit in number(30))
  begin
  select tbl_report.id from tbl_report where tbl_report.id like '|| t ||%' and rownum <= limit;
  end test;

  and then I type in run hr.test ("J", 10); to run this and then press ENTER, and it does nothing. How can I run and create a simple procedure in sql * more

  Hello

  In addition to all the good points, others have done:

  When you issue a SELECT statement in SQL * Plus (or any other front end) two things happen:
  (1) a result set, containing the results of your query, is produced, and
  (2) this result set is displayed.
  Given that these two things are always done together, it is easy to forget that they are two different things.
  In PL/SQL, you must explicitly do something to catch the result set, and you must explicitly do something else to view it (if you want to display it).

  A simple way to get the result set is to use a cursor FOR loop, to extract a line at a time and run code with this line in a record variable (called the country in the example below).
  View the results is to call dbms_output.put_line.

  Here is an example:

  CREATE OR REPLACE PROCEDURE     test
  (       t       IN      VARCHAR2
  ,     lmt      IN     NUMBER          -- LIMIT is an Oracle keyword; best not to use it as a variable name
  )
  IS
  BEGIN
      FOR  country  IN ( SELECT  country_name
                        FROM    hr.countries
                   WHERE   country_name     LIKE t || '%'
                   AND     ROWNUM          <= lmt
                 )
      LOOP
          dbms_output.put_line (  country.country_name
                      || ' = country_name'
                      );
      END LOOP;
  END test;
  /
  SHOW ERRORS
  

  You can use variables, such as t and lmt, in the query without using dynamic SQL, as long as the variables do not have the same names as the columns in the table. In this case, t and lmt are good names; country_name or region_id wouldn't. (In fact, t is a reputable insofar as it cannot be confused with a column in the table of the country. T is not a good reputation in the sense that it does not give much information about what contains the variable, or how it is used. Why not call the variable target_name or name_a_trouver?

  You can run the SQL procedure * more like this:

  SET     SERVEROUTPUT     ON
  
  EXEC  test ('I', 2);
  

  If you issue the SET SERVEROUTPUT ON command, then you will not see the output of dbms_output. You must only issue the command SET SERVEROUTPUT ON once per session, but nothing bad happens if you do it more than once.

  When I ran the procedure as stated above, I got this output:

  Israel = country_name
  India = country_name
  

  Notice that "The Italy" does not appear, because lmt has 2.

  Do not create your own procedures, tables or other objects in the HR schema, or among all the other patterns created by Oracle. Create your own schema and create procedures and other objects in it.

• SQL * more State 2091 internal error error

  version: 9i
  
  When executing SQL queries, I get this error:
  
  
  SQL * more internal error state 2091, context 0:0:0
  Dangerous to proceed

  Try to upgrade your SQL client * more...

  Using specific syntactic 9i? Sometimes more old SQL * more can't handle the syntax 'most recent '.

• try to load ProComm Plus more get error 105 found language installation

  try to load ProComm Plus more get error 105 found language installation

  ProComm Plus like at least 10 years and has ceased to exist, it's not compatible Win7

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani