Connection to the 11g on Oracle_Developer_Days.ova with sql + more

Similar Questions

• Unable to connect to the bridged casting of Chrome with WRT1900ac

  I have Verizon Fios that doesn't let you not use your own router has its own.  Instead, I have a WRT1900ac passed on ethernet to the router Actiontec verizon provided.  Melting of chrome only supports 2.4 ghz.  When I am connected to the network 2.4 ghz with the control device I can control fine.  However, when I connect to the 5 GHz network on my device, it does not recognize the chromecast.  It seems that I have to turn off the AP isolation, however I can't find this in the settings of the bridged router limited menu.

  You can try it but it never worked for me and said it may not work:

  192.168.1.1\Wireless_Advanced.asp

  Let us know if it changes whatever it is for you... otherwise, I recommend that you call your Linksys contact Regional Office support and ask for help and information about it. We find that the telephone contacts has better immediate results on the use of electronic mail.

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  Hello

  Thank you for using https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html > and all the steps in "troubleshooting connectivity issues.

  If necessary, and for any other question, click on through http://helpx.adobe.com/contact.html and so "open" Please use the chat, I to can I part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available to help agent.

  Hans-Günter

• What happens if I am connected to the internet through two different sources or more?

  What happens if I am connected to the internet through two different sources or more?

  You get Internet from two sources. What did you expect to happen?

  This is not double the speed of anything...

• Unable to connect to an instance by using EM but properly connect with SQL * more

  Hello
  
  I followed the following steps (from the document s/n 2 days):
  
  1. I created a model (including the database) to an instance named "orcl" using DBCA, before we proceed to create the model, DBCA informed me that the Forum might be stopped, I told him to go ahead.
  
  2. the model has been successfully created.
  
  3. I am now unable to connect to the instance orcl using EM, but I can connect to this instance without any problem using SQL * more.
  
  Question: Why am I not able to connect to the instance by using EM? and what should I do to fix this?
  
  Thank you very much for your help,
  
  John.
  
  PS: in case it may be useful, the listener tnsnames and Sqlnet files follow:
  

  # listener.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = CLRExtProc)
        (ORACLE_HOME = E:\Oracle\product\11.2.0\dbhome_1)
        (PROGRAM = extproc)
        (ENVS = "EXTPROC_DLLS=ONLY:E:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = E:\Oracle

  # tnsnames.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DBCA =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = dbca.localsite.com)
      )
    )
  
  ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (CONNECT_DATA =
        (SID = CLRExtProc)
        (PRESENTATION = RO)
      )
    )
  
  LISTENER_ORCL =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
  
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl.localsite.com)
      )
    )

  # sqlnet.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

  I think you change some configuration of your system as domain/IP address/host name.
  You need

  set ORACLE_SID=orcl
  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

  then after result

• XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

  my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

  Hello

   

  Thanks for asking!

   

  You can't connect to the internet.

   

  1. do you receive any error messages?

  2 what is brand and model computer?

   

  The question may be because the network drivers.

   

  To check that I suggest to visit:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• BlackBerry Smartphones Priv - connection to the computer as a drive with cable...

  You can connect the Priv a PC with the cable to access as a drive, especially for access to the SD card?   I had assumed would be immediate, easy, but the laptop does just not see it connected...?

  Some good news.

  Finally, I can get it to connect, but better as "Mount SD card", do not use Android file transfer.

  Certainly, there are only going to transfer different files Android app link provided in the MTP option in the phone under settings, buffer, top right options - USB connection to the computer, I had to kind of work, but I think it's a one-way arrangement therefore does not allow fiddling with files or data on the SD card.

  With the option of mounting SD, its worth knowing that the phone is not yet recognized, you need to pass options while its connected, so when switching back to Mount SD, it appears suddenly!

  I managed to move some files autour, and if I drop in the DCIM folder, Camera leader, they then appear within the app Photos, without the need to got to the unit records.

  Is worth knowing when you're connected, more, but not all of them simply disappear with the handset, but all are in their proper place, moved or otherwise, 30 seconds or more after the disconnection.

  Question NEXT, related to this, but could start anew thread; In my photos, I always kept a photograph or a scan of my passport, driving licence and stuff, amazing how much it is useful.  Priv does not read this map file, even if its same region in Photos.  The Passport can be pdf, is it possible to move files between the laptop and Priv autour so that it can read the docs and other things or is it possible to create a file on the SD card where the docs can be submitted and read by the priv...?  Indeed, where are the docs on Priv?  Ive schedules of my son on the map, but they do not seem to appear anywhere in the private and they are the .docx files.

  Thank you.

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Connect to the database with SQL * more: is TNSNAMES. ORA used?

  Hello

  We have a local database called DEV01 and a copy of this database in a data center. To be able to connect to both databases, the TNSNAMES file. ORA

  on the local database server (not the one in the data center) has the following entries:

  / * Entry for the local database * /.

  DEV01_local, DEV01_local. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server01) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  / * Entry for the database in the data center * /.

  DEV01, DEV01. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server02) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  When I connect to the local database server, I set the Oracle environment as follows:

  export ORACLE_SID = DEV01

  export PATH=/opt/oracle/app/oracle/product/9.2.0/bin:$PATH

  export ORACLE_HOME=/opt/oracle/app/oracle/product/9.2.0

  Now I start SQL * more as follows:

  Oracle # > sqlplus user/user

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  As the SID is on two databases of the same (DEV01) I really don't understand how Oracle decides which of the SQL databases * more connects to.

  Is it the entry in the TNSNAMES file. ORA?

  But when I start SQL * more as follows:

  Oracle # > sqlplus user/user@DEV01_local

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  or

  Oracle # > sqlplus user/user@DEV01

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  DEV01 server02

  everything is as expected.

  Does anyone know who is the chosen database when just to connect with 'sqlplus user/user' (without the @DEV01 or @DEV01_local)?

  Any help will be appreciated!

  Rgds

  Jan

  When you connect to the local database that is connected to the server01, you need only specify the sid in the environment, in this case, Oracle tnsnames file to connect, actually uses, it uses any of the listener.  It uses what is called a connection needed.  It is purely a side connection server, and as long as the sid is located in the environment resolves to a database running on that server, you will be get connected.

  When you connect using the @connect_descriptor, like you second case, then Oracle will use the configured naming, including tnsnames, methods to solve the 'real' database  In this case, the auditor is required to create the connection to the database.

  John

• Connection to the local only - any help with payment facilities?

  My laptop can find router when I connect to another user not guaranteed. But when I try and connect to the internet using mt all own connection I get is local connection only? This happenened all when my son PS3 got an error code and it reset the router, modem, Ps3, etc. Any help in terms simple on what parameters to change so when I run my own connection, it will stop showing the local connection only. Thank you.

  Hello CallumDoyle,

  I suggest that you try the methods below to resolve this issue:

  Method 1:

  I suggest that you run Network Diagnostics on your computer. Following article will give you information on this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  Follow the link below and run them the Fix - it talks about Windows Vista cannot obtain an IP address from certain routers or some non Microsoft DHCP servers:

  http://support.Microsoft.com/kb/928233

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Unable to connect to ZAKCAPRIUS. Failed to connect to the user "zakcaprius\Zaki". (Microsoft SQL Server, error: 18456)

  Cannot connect to the sql server database engine 2008 developer edition. However can connect to analysis, reporting services. Kind regards. ~ ~ SiFaR ~ ~

  Please repost your question in the Discussion SQL Server group to: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sqlserver.server&cat=en_US_671e06d0-f20d-4bb3-9c6a-42c825ddb1dc&lang=en&cr=US where questions of SQL Server specialists will be more than happy to help you with your problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connection with SQL * more is not possible

  Hello together,

  I have a problem with my database and SQL Plus.

  I can't connect to my DB via SQL Plus, I get the error message: > > ORA_12546: TNS: detonation verweigert (Permission denied) < <.

  I tried it with several users. When I try to log in to enterprise manager or connecting to the DB through SQL Developer works very well with the user > > sys < <, only the SQL more connection does not work.

  It works until yesterday that there are some problems with the DB and the processor and RAM were almost 100% occupied each.

  
  

  We use the Version 11 g Enterprise Edition Release 11.2.0.1.0 64 bit Production on a Windows Server 2008 R2 Enterprise Server.

  I am running SQL Plus, Enterprise Manager and SQL Developer directly on the DB server.

  When I start SQL Plus he asks me my username > > enter user name: < < and after that my password: > > password: < <.

  A connection as seen in many forums or document on the internet like > > scott/tiger@ORCL < < never worked on my system, which is also confused me.
  

  
  

  We have no listener.ora file in the folder: ORACLE_HOME/NETWORK/ADMIN only a sqlnet.ora with line > > SQLNET. AUTHENTICATION_SERVICES = (NTS) < < in it.
  

  
  

  
  

  Status of the listener:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------
  

  C:\Windows\System32 > lsnrctl status

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18 February 2014 12:14:32

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.1.0 - Production

  Start date February 18, 2014 10:15:54

  Uptime 0 days 1 hour 58 minutes 42 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  O:\app\administrator\diag\tnslsnr\QualisysDbNbg\listener\alert\log.XML log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=QualisysDbNbg) (PORT = 1521)))

  Summary of services...

  Service "orcl" has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  The command completed successfully

  C:\Windows\System32 >

  ---------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  I hope someone can help me with this problem.

  
  

  Thank you you very much in forward for your answerand greetings

  Matthias
  

  
  

  The sys user must connect as sysdba

  have you tried

  sqlplus 'sys@ORCL as sysdba'

  or

  sqlplus 'sys/yoursyspwd@ORCL as sysdba'

  the first command should work without password for all users group ORA_DBA.

  Scott, the user cannot also exists in your database.