'EMPTY' accessories, tools & maintenance system.

Similar Questions

• Lost the calculator in the accessories tools system how I get it back?

  Calculator, lack of accessories (System tools_

  Hi Frank,.

  In addition to Wunders post, if you are not able to start the calculator from Start-> Run, then you will need to repair, click Start-> settings-> Control Panel-> Add/Remove programs => select Add/Remove components of windows-> select Accessories and utilities-> Accessories-> Tickmark calculator and click ok on all screens. You may need windows installation cd.

  I hope this helps.

• Preparation tool update system for Vista

  Vista Home premium 32-bit with Vista SP3

  Norton Internet Security 2010

  back in June 2010, I received an update to run the preparation tool update for Vista system. I ran that tool, but may not have let finish because it took almost an hour with no end... not sure if the tool ran and completed its function. Now, I've read that the process of this tool work can take well over an hour

  Anyway, nothing thought up until this last week

  I installed Norton Internet Security 2010 last week. I noticed that Norton detected a kind of error with ccSvcHst.exe function program and the error code was

  0 x 80070490

  which seems to indiacte something wrong with my Vista operating system

  I went and made a check of updates from microsoft, but the tool is not yet available

  Norton forums suggested that the tool must be run again. I noticed there is a more recent version of the tool (seven 29, 2010) than what I ran in June 2010

  ALLOW ME TO NOTE THAT I DON'T HAVE ANY PROBLEM WITH RETRIEVE AND PROCESS THE MICROSOFT UPDATES > UPDATES MICROSOFT INSTALL WITHOUT PROBLEMS

  1 should I I manually run the system update readiness tool again? (I now understand that I need to leave him alone and let him finish) I know that the current tool was revised in September 2010.

  2. can I cause system problems if I run the tool again?

  3. what version of the tool manually should I download and run x 86 vista or vista x 64? MYSYSTEM is vista Home premium 32-bit and a dual core processor

  The CheckSUR.log file is the only thing that we really need to look at in this case,

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22441
  Version 9.0 package
  2010-10-19 18:52

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436
  (f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifest x86_microsoft-windows-smbserver - v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639

  Summary:
  Seconds executed: 8959
  Found 4 errors
  CSI shows lack Total count: 2
  County CSI shows zero total length: 2

  Unavailable repair files:
  winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest
  winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest
  winsxs\manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest
  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifest

  I have an example of how to solve this problem here , but you will need to get the missing files above instead of the ones I have identified for the other user.
  -Mike Burr

• 800b0100 on update for windows mail__update fails continually - tool is system strengthened

  800 b 0100 on update for windows mail
  Update continually fails - can find system uptime tool

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Re-install accessories without a system CD

  I have a Windows XP Professional license. Unfortunately, I lost the CD of the system (installation). I want to restore the add-on 'Accessories' (games, calculator, etc.) which I removed sometimes back.

  Any clues on what do I do?

  I have a Windows XP Professional license. Unfortunately, I lost the CD of the system (installation). I want to restore the add-on 'Accessories' (games, calculator, etc.) which I removed sometimes back.

  Any clues on what do I do?

  And care of Windows - Accessories program group

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller

• How can I correct the record recently discovered empty administrative tools?

  Have no idea how all my files in the administrative file disappeared. Summer in / uninstalling various programs. Win 7 is updated with SP1 and other updates. The system restore point is before installing SP1. Have not tried to restore the system, b/c I doubt that the problem is due to this update. Even if the clipper screen MS Onenote is listed in startup programs, it will fail to load. Also, I get a message that I should do my default mail to Outlook. Historically, but now he is not recognized. Malware RAN Ad-aware and IObit360 scans with any find. System is protected by Kas.Int.Sec 2010. Clean the registry with Reg. wise cleaner. Any suggestion is appreciated.

  I had same as make you this http://www.sevenforums.com/tutorials/29965-administrative-tools-restore-shortcuts.html k

• maintenance system try again later?

  When I get this error message,
  
  "the system in maintenance mode. "Please try again later".
  
  I got this when I'm trying to change the report on the dashboard.

  you get this when 'Maintenance mode' is running.
  to turn this off, first of all you must have appropriate privileges.
  If you have privileges go to settings > Administration > switch to Maintenance Mode (is a hyperlink in your lower left corner).

  Mark answers quickly

  J
  -bifacts
  http://www.obinotes.com

• computer is empty when trying to system recovery.

  Hi, I have a hp pavilion elite e9220y of windows 7. I got a message bootMGR missing on my computer and did not have a restore disk created. When I tried using the built in recovery of the system that has nothing past. (tried several times). So I ordered the hp system recovery disks. When I tried the recovery the moniter system past in mode 'sleep', and the computer crashes. any help would be appreciated.

  Thank you for your imput. the problem was that the cooling fan system was broken.

• Malicious software removal tool and system disk errors

  I ran a full Scan with the MRT tool last night and noticed that there are a bunch of disk errors in the observer of events during the same time period. Is there a reason that this may be the result of the analysis? Running the disk errors and tool MRT in Event Viewer.

  Disk errors can be supported if it is a simple configuration problem,

  But if its due to "bad sectors" on the hard drive, then the hd is a failure. Or the other

  for example, to chk on the hd & fix, go to run, type: cmd cmd, type:

  CHKDSK C: /F agree to restart, type: EXIT restart pc... The disk check

  work on restarting the pc, once he finishes, look at the data "bad sectors", if its zero, then

  you are in ok shape...

• My Satellite A105 is trolling

  I have a Satellite A105-S4074 and we work badly lately, I did not install any drivers or program. The problem is as a 'delay' in everything I do. I noticed that when I was listening to music or when I started a program that has sounds because they cannot be read fluently.

  I have this problem windows starts slower that it usually does. I had this problem once and the solution was to reinstall windows. I wish that any solution that you can give me. Thank you for your attention.

  Hello

  To be honest, I also think that the new installation of the operating system is the best solution. Especially if you don't have enough experience with the operating system.

  This time, you can try to optimize the HARD drive activity and run the Disk Defragmenter tool. You can find it under start all programs accessories tools drive system Defragmenter.

  Please mark the C volume and click DEFRAGMENT.
  After you have finished, restart your laptop. Please post the results. There are a few more things you can of but we do this step by step.

  Good bye

• where can I install outlook express for windows xp I deleted by mistake it.

  I do stupid things sometimes and this time I deleted outlook express with the Add/Remove programs. How can I get it back?

  Try to restore your computer to an earlier time, before the uninstall of Microsoft outlook express. Click Start, all programs, accessories, tools and system, then system restore.

  Good luck.

• After a virus has been wiped out and I have more tools system system restore

  I repeated virus attacks. I believe that my machine is clean now. Can I access Windows Update and my Security Center settings are all on. My tools of system in the programs is empty. None of the tools are. My computer is a Dell and Dell accessories and links have also disappeared. How can I get these?

  Hi Grannyron,
   
  System tools are available as accessories.
   
  When you point to programs, you aren't able to find accessories as well?
   
  Method 1: Try the steps listed in the following article to resolve this issue.

  Several dialog boxes are empty

  Method 2: Scan the checker (SFC) system files on your computer.

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available on:

  File system (CFS) Checker

• My XP desktop seems to have thrown my 'system tools' function and I want to use the disk cleanup and defragmentation... How to get back the system tools?

  My computer is as I said above a desk with the microsoft XP program and is a little less than five years.  It has been slow and it dawned on me that I hadn't used the disk cleanup or some defrag for a while, but I clicked on start, all programs, accessories, System Tools was is no longer.  I have not been able to access the disk cleanup or defragment option and hope that out there, can someone advise me how to get this feature.

  You can run Disk Cleanup and Defragmenter disk since the start > run box by typing the following

  Cleanmgr
  Dfrg.msc

  You can restore all of the 'Accessories' group (including system tools) by following the directions here--> http://windowsxp.mvps.org/Accessories.htm

  Or you could just create shortcuts to

  C:\Windows\system32\dfrg.msc
  and
  %SystemRoot%\System32\cleanmgr.exe

  Note that % SystemRoot % is the directory where Windows.  You can use this form or explicit as in the example for the shortcut from the Defrag.

• "System Tools" icon is out of the office, lack also disk cleanup and defragmentation in Windows XP

  The 'System tools' icon on my desktop disappeared.  I used it when I defragmented the computer and disk cleanup.

  When I hit 'start' 'Programs', 'Accessories' I have 'System tools' option, but when it is open, the icons are many and unintelliglble for me. There is nothing of cleaning disk or Defrag.  How can I get my old icon on the desktop to disk cleanup and defragmentation among other choices?

  Thanks for the tips.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Try the methods below:

  Method 1:

  Restore the computer to a previous state and check if this may help with the steps, you can see: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)