Empty schedule added at the end of the video

Similar Questions

• Why the videos won't play when I visit websites?

  When I go to a website like MySpace and you want to watch a video clip or tape of the film, the window is empty which must play the video. Why and what do I do to correct the problem? The only thing in the window where the video should play is a small icon in the upper left corner.

  Hello Cis_n_red,

  Thank you for your message.  This problem could be related to flash player.  Try to download or to install the latest player flash from the link below and give it a shot.  After you have installed the player, close your browser and reopen it to enter into force.
  http://www.Adobe.com/products/flashplayer/
  Please let us know if this corrects the problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• addition of text/logo superimposed on the video

  I've done this before but haven't used PP in a while and do not remember how I did it.

  I created a few layers of text in Photoshop CS6 and the dish.  I made the background transparent.  There he shows checkerboard background.

  then I imported the PP and added to the video track, but instead of just text, the background is white, blocking the video entirely.

  What is the file format?

  Try .psd or .png.

• AirPlay button appears in the video playback controls

  We proabbly want right? Or, maybe you would. Maybe make this configurable user?

  Thank you

  -Mark

  You are on iOS 6? Looks like something Apple has re-added to the video playback control. I doubt that we have control over it.

  Neil

• Firefox is refreshing all pages of a Web site only and adding # at the end of the URL - it may be the cause?

  In my workplace, I use Firefox version 5.0.1 on Windows XP. When you access pages on the Web site http://www.sqa.org.uk (it is used the website of my place of work), pages refresh approximately every 30 seconds to a minute, and a sign # is added at the end of the URL in the address bar.

  This does not occur on all other sites, but it occurs also with colleagues who also have the same version of Firefox. I have disabled the extensions, had removed then reinstalled Firefox but the problem just occurred.

  You have any ideas?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• All my photos suddenly have the extension .cfog added to the end of the name, and I can't open them. That's happened?

  All my photos suddenly have the extension .cfog added to the end of the name, and I can't open them. That's happened?

  Hi David,

  It's because you have installed CloudFogger, which protects your files in enrcytpt them to ensure safety for DropBox or GoogleDrive. Probably, you have not installed the program, that's why it shows all files with the extension .cfog I you Explorer.
  Re-install the program and you connect to your account back on your files.

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• URL of discoverer is added at the end of the name of EUL Language Code

  Dear all,
  
  I configured a new discoverer report.
  I'm as in menu self-service.
  It gives EUL Unreachable error.
  When I checked the URL, it is adding "_US" on behalf of the GUE.
  For example,.
  http://oratest.Emaar.AE:9999/discoverer Viewer? Connect = APPS_SECUREoratestdb_dd & SessionCookieName = oratestdb_dd & eul = EUL_PROD_US...
  When I removed "_US" and updated, it worked.
  In fact I EUL as 'EUL_PROD' and not 'EUL_PROD_US '.
  How we prevent oracle adding to this?
  
  For the profile "ICX: discoverer end-user layer language substitute" and "ICX: language ', I changed value of previous value of the 'American English' site, responsibility and user level.
  
  Kind regards
  Gwendal Shah

  PL see your double post here - discoverer URL is added at the end of the name of EUL Language Code

  Srini

• Random audio added at the end of the videos made in Media Encoder

  I am facing a problem with Media Encoder.  When I export first to Media Encoder it is a random audio presentation of the timeline text ends at the end of the video when played. First of all, it happened to me while he was working as an editor in a production House last week. I had to export directly from first thing this text of presentation audio random in music or talk would end at the last second or two to make it final. They were running the latest versions of first and Media Encoder. Now, work at home on my desk, I find the same thing is happening on a completely independent project. AND it started a few days ago when I updated last update as well on both programs. If I export directly from first, the video is very good. If I export with Media Encoder, the audio presentation text is at the end of the video most of the time. Anyone who knows this?

  One of the things I love about CC is the ability to export all working. Something you could not do with the suites of the FCP and Avid, I had worked with in the past. But now I can't export and continue working because Media Encoder does not work properly. I repeat that this is not an isolated experience, because it took place on two separate Macs and age different OS systems.

  My problem seems to be resolved once make the updated Media Encoder AND rebooted my system. I would log in your Adobe Manager and check to ensure you have LATER I have although I did, but didn't. Even the 'compilation error' has disappeared. Don't forget to restart. I know that many stores never turn off their workstations. I do it every night. They ARE machines after all and wear if you let them all the time. But it is another forum that I will go down. Laughing out loud!

• schedule meetings with the TMS and CTManager on the same endpoint

  Hello everyone

  I explain my problem, we have a CUCM with CTManager to plan meetings of the CTS, we have 2 VCS with a TMS to plan meetings of TC endpoints also.
  Our TC end points are saved in venture capital using H323, recorded in CUCM using SIP and exchange of email to can program using the CTManager. And TC endpoints are supplied by our TMS.

  As endpoints of TC may appeal to the endpoints CTS sometimes we have meetings planned between TC and CTS endpoints in the CTManager, but if schedule us a meeting by using the TMS, meetings of CTManager disappear and endpoint show TMS meetings, if we do a resynchronization of the electronic mail room in the CTManager We can see again in the meetings of CTManager in the touchscreen.

  We tried not to allow bookings for this endpoint of TC in the TMS, but later there is no way to schedule a meeting for this endpoint, even using the external call.

  You know any workaround solution to activate the two calendar options running on the same endpoint without removing the CTManager meetings? We don't need the BBFRR for the TMS meetings, only for meetings of the MLC.

  Best regards

  Hello

  Disabling power of the TMS write calendars 'Meetings' on managed systems is not supported. If an endpoint is added to the TMS, TMS assumed that endpoint is not used in another system of planning (such as CTS - man) and could replace any parameter that depends on the other system of planning.

  Kind regards
  Kjetil

• I have Avira version 14 and Firefox deleted/added to the allowed sites but still does not!

  When I run Firefox it just barattes away and expires. Sometimes, if I just leave, after ten/twenty minutes he'll run v, v slowly. I uninstalled and installed Firefox. I have the latest version of Avira [14] and deleted Firefox and added to the allowed applications, still no joy. You write from a different browser. Also if I close Firefox and then try to restart I get the Firefox is running... Now becomes seriously annoying. I can only assume that Firefox is not quite up-to-date with the version of Avira. The other browser will run without problem.

  In the end, I uninstalled Avira, restarted; downloaded and run registry cleaner, delete all keys, restarted; Finally reinstalled Avira, has completed the installation, etc, and now Firefox works a trea. Hated by using IE, yuk!

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• Current path of the VI is empty when connected to the indicator

  I'm building an ActiveX executable from another language (Visual Basic, C++, etc.).  So I need to create the object, the path of the vi.  I don't know why, but the planned path gives an error.  I wanted to check the way VI so I added an indicator to the current path of the VI.  The indicator is empty when I run the VI.  How can this be.

  LabVIEW 2010 SP1, Windows XP SP3

  VI was originally in LabVIEW 2009 and I have improved.  Some screws sub hepatitis was added from previous LabVIEWs (as far as version 6 if necessary).

  Thank you

  Javi

  So much worse... It follows from several things.  One is that when you click on a vi through a project the application path is different if you opened to the top of the vi.  And the other thing was using the open vi reference and methods to initialize controls.  Is it possible to delete an ad?

• Why the MCU is automatically added to the conferences in TMS?

  Info:

  Endpoints: Tandberg 6000 MXP & 95 MXP

  TMS: 13.2.2

  Codian MCU 4510: Software version 4.4

  Tandberg GK: N6.3

  Tandberg BC: Q6.3

  When I create a conference at TMS and want an end point to compose our system to an MCU on another site (confined), the our local MCU is automatically added to the Conference, for some reason any.  For example, if I create a conference with room 123 and number 'Dial Out' external 2222222, TMS adds MCU of our system and forces to compose both room 123 and 2222222, which is totally useless.  This should be simply, what is the endpoint is, a direct line to 2222222.  Why the MCU is being added?  This will use licenses MCU in haste when it is not necessary at all.

  I went through TMS > administration tools > Configuration > General settings, network settings and conference settings and cannot understand why the MCU is added.  If we dial manually, no problem.  My goal is to automate the entire composition, however.

  Pointers?  I put some of the parameters of the TMS > Admin Tools > Configuration > Conference settings below.

  

  Luke

  Hello

  Reduce the bandwidth of conference help? TMS could add a MCU if it detects that one or more participants do not support the bandwidth conference.

  Kind regards

  Kjetil

• Help: Adding to the IPsec Tunnel encryption field Questions

  Good evening everyone,

  I'm looking for help and/or advise in what concerns adding more networking in the field of encryption of an existing IPsec site-to-site tunnel.  Both sides of the tunnel are of ASA.  The client on the remote end is eager to access the networks more on my end.  They have already updated their ACL crypto map to include the new networks.  When they perform "show crypto IPsec his counterpart x.x.x.x" it shows already encap packets attempting to join my network.

  On my side, I updated my ACL crypto map to reference the new 2 networks, created the double NAT and added the ACL needed to allow the inbound access through ports they want.  When I perform a 'see the crypto IPsec his counterpart x.x.x.x' output is NOT up-to-date with the new networks added to the field of encryption.  When I run a tracer of package of supply of one of the servers in the new network, the traffic is translated as he should, but a fall when it hits the outgoing interface for the VPN tunnel.

  Am I missing something here? Can I bounce the tunnel so that the new networks must be recognized in the surveillance society?

  Thanks in advance.

  Hello

  You must bounce the tunnel when you change the interesting traffic, otherwise the new SA will not be created, is a little funny that you say that SA is already build on the remote side, SA cannot be established only on one side, is like building a new tunnel, if you don't have it on one side, it can not simply prevail and create the entry of SA. In addition, adding new networks and bounce the tunnel you need to generate traffic to trigger the ITS new or you will never see that it created. Check your no nats and routing and it should work.

  Best regards, please rate.